Before you install the print server:
Requirements:
-Bluetooth-capable PC which supports the HCRP and SPP Bluetooth print protocols
-A printer with a USB type B interface
Package contains:
-Bluetooth printer adapter
-Power supply unit
The following Bluetooth protocols are supported:
-HCRP
-SPP
-GAP
-SDAP
1. Installing the PS-100
-Switch your printer off
-Insert the USB connector of the PS-100 into the printer's USB port
-Connect to the power supply by plugging the power supply unit into the mains socket and then
connecting it to the PS-100
-Start your printer.
* Over the additional USB port at the printer server, the printer can be "piped".I.e. a PC can directly be
connected at the printer server via USB, as well. *
2. LED indicator
The PS-100 has 3 LED indicators:
- Power LED: A green light is shown as soon as the PS-100 is connected to the power supply
- USB LED: is shining or flashing red when having access at the connected printer
- Activity- LED: is shining or flashing blue in case of Bluetooth activity.
3. Compatibility list
3.1 Printing was only tested from PCs or notebooks with the following printers:
Hewlett-Packard:
Deskjet 450/840C/843C/845C/920C/930C/932C/935C/940C/948C/950C
952C/955C/957C/960C/970C/970Cxi/980C/990C/990Cxi/995C
995CK/1180C/1220C/5150/5550/5558/5560/5652/5670/6120
6127/6540/6122/2600/CP1160C/CP1700/Business2600/Business3000
Laserjet 6P/1010/1015/1150/1200/1300/1500/2300/3200/3300/4650/3500/3700
Photo Smart 100/130/140/145/230/240/245/1000/1100/1115/1215/1218/1315
7150/7350/7550/7260/7660/7760/7960
MFP 5110/6110/2175
L Installation Instructions for Bluetooth Printer Adapter PS-100
00062794bda 01.06.2005 16:04 Uhr Seite 6