1
Unpack printer
Notes:
• Do not attach the USB cable until
prompted to do so.
• Place the printer near the computer
during setup. If you're setting up on
a wireless network, then you may
move the printer after setup is
complete.
• Contents may vary by model and
region.
2
Remove tape and packing material from all areas of the
printer
Lexmark S800 Series Installation
3
Use slider to extend paper guides
4
Load paper
1 Load paper.
2 Adjust the paper guide.
Lexmark S800 Series Installation
5
Extend paper exit tray
1 Pull out the exit tray.
2 Extend the flip-out tray.
6
Connect power cord only
Note: DO NOT attach the USB cable yet.
CAUTION—POTENTIAL INJURY: Read the safety information included with this product before connecting
power or making any cabling connections.
Lexmark S800 Series Installation
7
Make sure printer is on
8
Set language on the printer control panel
After setting the language, touch OK.
9
Confirm language
Touch if the language is correct.
Touch if it is not correct.
Lexmark S800 Series Installation
10
Set country/region
After setting the country/region on the
printer, touch Accept.
11
Set date
After setting the date on the printer, touch
Accept.
12
Set time
After setting the time on the printer, touch
Accept.
Lexmark S800 Series Installation
13
Set time zone
After setting the time zone on the printer,
touch Accept.
14
Open printer
Behind the printhead access door, you'll
find the touch-screen cloth and customer
support label, which contains the
following:
1 Model number
2 MAC address
3 Machine serial number
4 Ink compatibility information
15
First, install each color ink cartridge. Then, use two hands
to install black cartridge
Lexmark S800 Series Installation
16
Close printer
17
From the printer control panel, touch Continue
Notes:
• The alignment page prints.
• Do not remove the page until
printing stops. The alignment page
may take a while to print and will
move in and out during the process.
• Streaks on the alignment page are
normal and not an indication of a
problem.
• The alignment page that prints may
differ from the one shown.
• Recycle the alignment page.
Lexmark S800 Series Installation
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Lexmark Genesis S816 Setup Manual
- Type
- Setup Manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Lexmark Genesis S816 Quick Reference Manual
-
-
Lexmark Pro910 Series User manual
-
-
Lexmark S310 Series User manual
-
-
-
-
Lexmark X5320 User manual
-
Lexmark S410 series User manual
