Safety Precautions
All pictures shown are for illustration purpose only and may differ from the actual
product.
Before using this product, please read this user manual and all safety instructions
carefully and completely to ensure safe and proper use.
The descriptions in this manual are based on the default settings of the product.
Please keep this user manual in a safe and handy place for future reference.
1. Unplug the USB power cable when not using this product.
2. For your safety, please turn off the power before going to bed.
3. Avoid using this product directly on the same area of skin for more than
15 minutes in the high temperature setting. If there is an abnormal smell, heat,
change of color, or other abnormalities during usage or storage, switch off the
power and stop using immediately.
4. Avoid getting this product close to any fire sources, corrosive liquids, or extreme
temperatures.
5. When washing, make sure the power is off. After washing, the product must be
completely dried before being used.
6. Hand wash only, scrubbing gently. Rinse thoroughly after hand washing to avoid
detergent residue. Do not hand wring. Hang to dry.
7. If the product is being used for an extended duration, such as when falling
asleep, please adjust to the low temperature setting.
8. Do not use if wet.
9. Do not insert pins.
Specifications
Product Name: AKASO Heated Scarf
Product Model: G001
Rated Voltage: 5V
Rated Power: 5W
Recommended Power Bank Output: 5V/2.1A
Operation Instructions
This product uses a one-button operation.
Control switch
Front
Power bank pocket
Zipper opening
Graphene heating sheet
Press and hold for 3 seconds to turn on the device. After turning on the
device, it will enter the high heat setting. The red light will flash and the
output power will reach 100% (The temperature is approx. 140°F/60).
If no one intervenes for 5 minutes, it will automatically enter the white setting.
Press again to enter the medium heat setting. The white light will flash
and the output power will reach 75% (The temperature is approx. 131°F/
55).
Press again to enter the low heat setting. The blue light will flash and
the output power will reach 60% (The temperature is approx. 113°F/45).
Keep pressing to cycle through the high, medium, and low heat setting.
In any of the above three modes, press and hold the control switch for
3 seconds to turn the product off. It will automatically power off after
45 minutes of continuous operation.