2. Warrior Products
  3. Half Doors

Warrior Products Half Doors Installation guide

  • Hello! I have reviewed the installation instructions for the Warrior Products TJ Wrangler Half Doors, specifically models 916DOOR and S916DOOR. This document provides step-by-step instructions on how to assemble the door handles, install the foam molding, and properly fit the doors to your Jeep. Feel free to ask me any questions you have about the installation process or the features of these doors. I'm here to help!
  • What type of Jeep is compatible with these half doors?
    What type of latch system is required for these doors?
    What steps are involved in the installation process?
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY ● INTEGRITY ● INNOVATION ● SERVICE
Warrior Products, Inc.
11100 SW Industrial Way
Tualatin, OR 97062
Phone (888) 220-6861
Fax (503) 692-0364
customerservice@warriorproducts.com
TJ WRANGLER HALF DOORS
INSTALLATION INSTRUCTIONS
S916DOOR / 916DOOR
Read all instructions before proceeding.
NOTE: Fits all applications where hard door striker pins and rotary paddle latch
are used.
1. Assemble the door paddle handles to both doors with the bolts and nuts provided.
2. On the inside of each door, install the foam molding per Diagram “A”.
3. Hang doors on jeep and check for proper fit. Close door slowly onto paddle
striker being sure that the paddle and striker line up correctly. Make any
necessary adjustments if needed.
If you need further assistance installing your product, please contact us by email at
[email protected] or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS
/