102MM105MM 105MM
148.5MM
Preferred connection
Press the BT button on your remote control
CONNECT VIA BLUETOOTH ENABLED DEVICE
DID YOU KNOW?
Press and hold the Pair button for 2 seconds until blue LED flashes
quickly. Connect to the soundbar by switching on Bluetooth on your
device and select <GDSBT30CS> from the list.
The indicator light on the soundbar will turn solid blue when
the devices are connected.
Control the sound level from your mobile device.
Connect the 3.5mm jack to the headphone socket on your TV and
the other end to AUX in on the back of the soundbar.
Press the Button on the soundbar or remote control, so that the
blue LED is illuminated.
Press the AUX button so that the white LED is illuminated.
Adjust volume to the desired level.
CONNECT VIA LINE IN CABLE
Connect one end of the 3.5mm line in cable to the side of the
soundbar and the other end to your device.
Press the Button on the soundbar or remote control so that the
blue LED is illuminated.
Press the LINE IN button so that the green LED is illuminated.
Adjust volume to the desired level.
Connect one end of RCA cable to the back of the soundbar and
the other end to the AUDIO OUT of your TV.
Press the Button in the side panel of the soundbar so that
the blue LED is illuminated.
Press the AUX button so that the white LED is illuminated.
Adjust volume to the desired level.
CONNECT VIA AUX CABLE
Flashes blue
(searching)
Solid blue
(connected)
OR VIA RCA PHONO TO 3.5MM JACK CABLE
