Goodmans GDSBT100OP Quick start guide

Goodmans
Brand
Goodmans
Model
GDSBT100OP
Type
Quick start guide
The full User Manual is available online at:
www.goodmans.co.uk/support
100W SOUNDBAR
Model: GDSBT100OP
DSC-DEC 3
WANT TO KNOW MORE?
100W SOUNDBAR
102MM 105MM 105MM
148.5MM
GETTING STARTED:
100-240V~ 50/60Hz
100-240V~ 50/60Hz
102MM105MM 105MM
148.5MM
CONNECT VIA DIGITAL CABLE (RECOMMENDED)
Preferred connection
Connect one end of RCA cable to the back of the soundbar and
the other end to the AUDIO OUT of your TV.
Touch the Button in the centre of the soundbar so that
the blue LED is illuminated.
Press the AUX button on your remote control
Adjust volume to the desired level.
Connect one end of Optical cable to the back of the soundbar and
the other end to the OPTICAL OUTPUT of your TV.
Press the BT button on your remote control
CONNECT VIA BLUETOOTH ENABLED DEVICE
Play music from your device through the line in connection on the
soundbar
DID YOU KNOW?
Press and hold the Pair button for 2 seconds until blue LED flashes
fast. Connect to the soundbar by switching on bluetooth on your
device and select <GDSBT100OP> from the list.
The indicator light on the soundbar will turn solid blue when
the devices are connected.
Control the sound level from your mobile device.
Or connect one end of Coaxial cable to the back of the soundbar and
the other end to the COAXIAL OUTPUT of your TV.
Note: RCA cable can be used.
CONNECT VIA LINE IN CABLE
Connect one end of the 3.5mm line in cable to the back of the
soundbar and the other end to your device.
Touch the Button in the centre of the soundbar, so that the blue
LED is illuminated.
Press the LINE IN button on your remote control
Adjust volume to the desired level.
OR VIA 3.5MM JACK TO RCA PHONO CABLE
Connect the 3.5mm jack end to the to the back of the soundbar
and the white / red end to the audio out of your TV.
Touch the Button in the centre of the soundbar, so that the blue
LED is illuminated.
Press the LINE IN button on your remote control
Adjust volume to the desired level.
CONNECT VIA AUX CABLE
If your TV does not have an DIGITAL connection, here
are some alternative solutions:
Flashes blue
(searching)
Solid blue
(connected)
Touch the Button in the centre of the soundbar so that
the blue LED is illuminated.
Press the appropriate SOURCE button on your remote control to
select the correct input.
Adjust volume to the desired level.
e
  • Page 1 1
  • Page 2 2

Goodmans GDSBT100OP Quick start guide

Goodmans
Brand
Goodmans
Model
GDSBT100OP
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents