Barco Nio Color 5MP MDNC-6121 User guide

Brand: Barco

Model: Nio Color 5MP MDNC-6121

Type: User guide

This manual is also suitable for

Nio Color 5MP (MDNC-6121)

ENABLING BRIGHT OUTCOMES

MDNC-6121

User Guide

5.8MP high-bright color display

Nio Color 5MP

Registered office: Barco NV

President Kennedypark 35, 8500 Kortrijk, Belgium

www.barco.com/en/support

www.barco.com

Barco NV

Beneluxpark 21, 8500 Kortrijk, Belgium

www.barco.com/en/support

www.barco.com

1 Welcome! ................................................................................................................................................................................................................5

1.1 What's in the box..................................................................................................................................................................................7

1.2 Product overview..................................................................................................................................................................................7

2 Installation .............................................................................................................................................................................................................9

2.1 Display position adjustment ........................................................................................................................................................10

2.2 Cable connections............................................................................................................................................................................ 11

2.3 VESA-mount installation...............................................................................................................................................................13

2.4 First time starting up........................................................................................................................................................................14

3 Daily operation.................................................................................................................................................................................................17

3.1 Recommendations for daily operation ..................................................................................................................................18

3.2 Key indicator lights...........................................................................................................................................................................18

3.3 Standby switching.............................................................................................................................................................................19

3.4 Bringing up the OSD menus.......................................................................................................................................................19

3.5 Navigating through the OSD menus ......................................................................................................................................19

4 Advanced operation.....................................................................................................................................................................................21

4.1 OSD menu language ......................................................................................................................................................................22

4.2 OSD menu automatic close function......................................................................................................................................22

4.3 Power LED............................................................................................................................................................................................22

4.4 Key indicator lights...........................................................................................................................................................................23

4.5 Power lock function..........................................................................................................................................................................23

4.6 DPMS mode.........................................................................................................................................................................................23

4.7 Hibernate...............................................................................................................................................................................................24

4.8 Luminance target ..............................................................................................................................................................................24

4.9 Viewing modes...................................................................................................................................................................................25

4.10 Display functions ...............................................................................................................................................................................25

4.11 Color presets .......................................................................................................................................................................................26

4.12 Ambient Light Compensation (ALC) ......................................................................................................................................26

4.13 Reading rooms...................................................................................................................................................................................26

4.14 Continuous ALC ................................................................................................................................................................................27

4.15 Embedded QA ....................................................................................................................................................................................27

4.15.1 About Embedded QA...................................................................................................................................................28

4.15.2 DICOM status report ....................................................................................................................................................28

4.15.3 DICOM compliance check ........................................................................................................................................28

4.15.4 DICOM calibration .........................................................................................................................................................29

4.15.5 Reset DICOM calibration...........................................................................................................................................29

4.15.6 DICOM error threshold ...............................................................................................................................................29

4.16 Display orientation............................................................................................................................................................................30

4.17 Image scaling ......................................................................................................................................................................................30

K5903146 /05 Nio Color 5MP

Table of contents

K5903146 /05 Nio Color 5MP4

4.18 Image source selection..................................................................................................................................................................30

4.19 Grayscale conversion modes.....................................................................................................................................................32

4.20 EDID format .........................................................................................................................................................................................32

4.21 EDID timings........................................................................................................................................................................................32

4.22 Display info ...........................................................................................................................................................................................33

4.23 Display status......................................................................................................................................................................................33

5 Cleaning your display.................................................................................................................................................................................35

5.1 Cleaning instructions ......................................................................................................................................................................36

6 Important information.................................................................................................................................................................................37

6.1 Safety information.............................................................................................................................................................................38

6.2 Environmental information...........................................................................................................................................................39

6.3 Regulatory compliance information........................................................................................................................................41

6.4 EMC notice ...........................................................................................................................................................................................42

6.5 Explanation of symbols..................................................................................................................................................................44

6.6 Legal disclaimer.................................................................................................................................................................................47

6.7 Technical specifications.................................................................................................................................................................47

Introduction

Thank you for choosing this Nio Color 5MP!

Nio Color 5MP is a 5.8 megapixel highbright display system that is color-calibrated and uniformity corrected,

providing excellent image quality for confident diagnoses for medical images including mammography and

breast tomosynthesis. With both accurate SteadyColor™ and DICOM-calibrated grays (500 cd/m2 for at least

five years) you discern even the tiniest detail even after many years of use.

The versatile high-resolution color solution on the market

The Nio Color 5MP offers the excellent image quality for gray and color images used in general radiology as

well 2D and 3D mammography. Its high brightness and high contrast ratio enable you to unveil even the

subtlest details and make accurate diagnoses. The unique 5.8 megapixel format of 2100 columns and 2800

rows shows more pixels on medical images compared to previously available 5MP displays that only have

2560 rows.

With the integrated smart features, you can easily take control and improve your productivity. SpotView™, for

example, allows you to focus on an area of interest to unveil even more details. And with DimView™, any

auxiliary displays can be automatically dimmed.

The Nio Color 5MP is also an excellent solution for radiologists who want to angle their desktop: it lets you

choose your preferred viewing angle and offers a highly ergonomic display configuration. It’s also possible to

switch between Clear base and Blue base viewing modes on-the-fly. Whether to suit the image type or to

change to different reading preferences, you decide which color you want and when.

Stable image quality, durable investment

Using Barco’s integrated front sensor, the Nio Color 5MP works perfectly with Barco’s online MediCal QAWeb

solution for automated Quality Assurance and calibration. QAWeb guarantees stable DICOM images

throughout the display’s lifetime.

Thanks to the highperformance LED backlights, the Nio Color 5MP has a positive impact on both maintenance

and operational costs.

Ultimate peace of mind

Barco is the only company that provides complete system solutions, from display and controllers to workflow

tools and calibration via QAWeb. All components are covered by our full 5 year warranty.

At product release, Barco extensively tests the displays compatibility with all major PACS applications.

WARNING: Please read all important safety information (“Safety information”, page 38) prior to

installing and operating the Nio Color 5MP. Adhere to all warnings and cautions mentioned in this

user guide.

K5903146 /05 Nio Color 5MP

Welcome! 1

K5903146 /05 Nio Color 5MP6

Welcome!

K5903146 /05 Nio Color 5MP 7

1.1 What's in the box

Overview

• MDNC-6121 display

• User guide

• System disc

• Documentation disc

• DisplayPort cable

• Mains cable(s)

• External power supply

• USB cable

If you ordered a Barco display controller, it's also in the box together with its accessories. A dedicated user

guide is available on the documentation disc.

Keep your original packaging. It is designed for this display and is the ideal protection during

transport and storage.

1.2 Product overview

Front

21 3 4

5 6

Image 1-1

1. USB-A 2.0 downstream connector

2. Left key

3. Right key

4. Menu key

5. Standby key

6. Power status LED

• Off: Display not powered, or display operational but power LED function disabled in OSD (see “Power

LED”, page 22)

• Steady white: Display operational

Welcome!

K5903146 /05 Nio Color 5MP8

• Slow blinking amber: Display in suspend mode (requires DPMS mode to be enabled in the OSD menu,

see “DPMS mode”, page 23)

• Fast blinking amber: Display in standby mode (requires DPMS mode to be enabled in the OSD menu,

see “DPMS mode”, page 23)

• Steady amber: Display switched off via the standby key, or display in hibernate mode (requires DPMS

mode and Hibernate to be enabled in the OSD menu, see “DPMS mode”, page 23 and “Hibernate”,

page 24)

7. Ambient light sensor

8. Front sensor

Back

1 2 3 5 64 7

CHANNEL 2 CHANNEL 1

Image 1-2

1. +24 VDC power input

2. Channel 2 DisplayPort video input

3. Channel 2 DVI video input

4. Channel 1 DisplayPort video input

5. Channel 1 DVI video input

6. USB-B 2.0 upstream connector

7. USB-A 2.0 downstream connectors (2x)

8. Connector compartment cover

9. Kensington security lock

10.VESA mount cover plate

11. Cable duct

12.Foot lock clip

Welcome!

1: Always connect the display(s) to a USB 3.0 hub, or if unavailable, to a USB 2.0 hub but then no more than two displays can be

connected to the same hub.

Prior to installing your Nio Color 5MP and connecting all necessary cables, make sure to have a

suitable display controller physically installed in your computer. If you are using a Barco display

controller, please consult the user guide delivered with it to do this.

For a list of compatible display controllers, please refer to the latest version of the compatibility

matrix available on my.barco.com (MyBarco > My Support > Healthcare > Compatibility Matrices >

Barco Systems Compatibility Matrices).

K5903146 /05 Nio Color 5MP

Installation 2

K5903146 /05 Nio Color 5MP10

2.1 Display position adjustment

To adjust the display position

1. Pull out the red foot lock clip from the hole at the back of the foot.

Image 2-1

2. You can now safely tilt, swivel, pivot, raise and lower the display as desired.

Image 2-2

WARNING: The display must be in its highest position before it can be properly pivoted.

Store the foot lock clip in the storage hole in case the display needs to be transported later.

Installation

K5903146 /05 Nio Color 5MP 11

Image 2-3

If, after installing the display of the system, you change the panel orientation while an image is on

the screen, the result depends on the graphic board and the resolution of the image. In some cases

the image will be rotated automatically, in other cases it will not be rotated (e.g., when pixels would

be lost after rotation). If necessary, change the image resolution in the display control panel and

restart the system after changing the orientation.

2.2 Cable connections

To connect the cables

1. Open the connector compartment. Do this by gently pushing the two lips on top of the cover, after which it

can be removed from the display.

Image 2-4

2. Connect one or more video sources from your workstation(s) to the corresponding video inputs on the

display.

Note: The MDNC-6121 can have multiple video inputs connected at once, and switching between these

inputs can be easily done in the OSD menu. See “Image source selection”, page 30 for more info on how

to configure the different video inputs on your display.

CHANNEL 2 CHANNEL 1

Image 2-5

3. Connect the workstation's USB host to the USB upstream connector on the display if you want to make

use of QAWeb or any of the display USB downstream connectors (e.g. to connect a keyboard, mouse,

touch pad or other peripheral).

Installation

K5903146 /05 Nio Color 5MP12

CHANNEL 2 CHANNEL 1

Image 2-6

4. Connect the supplied external DC power supply to the power input on the display.

CHANNEL 2 CHANNEL 1

Image 2-7

5. Route all cables through the cable duct in the stand of your display. For better strain-relief and shielding of

the cables, fix the cables with the cable straps at the inside of the connector compartment.

Image 2-8

6. Close the connector compartment cover. You will hear a “click” sound when the cover is in position.

Installation

K5903146 /05 Nio Color 5MP 13

Image 2-9

7. Connect the external DC power supply to a grounded power outlet by using one of the power cables

included with the display.

2.3 VESA-mount installation

CAUTION: Use suitable mounting apparatus to avoid risk of injury.

WARNING: Never move a display attached to an arm by pulling or pushing the display itself.

Instead, make sure that the arm is equipped with a VESA approved handle and use this to move the

display.

Please refer to the instruction manual of the arm for more information and instructions.

WARNING: Use an arm that is approved by VESA (according to the VESA 100 mm standard).

Use an arm that can support the weight of the display. Refer to the technical specifications of this

display for the applicable weight.

Overview

The panel, standard attached to the tilt & swivel foot, is compatible with the VESA 100 mm standard. So it can

be used with an arm stand according to the VESA 100 mm standard.

Therefore, the tilt & swivel foot must be removed from the panel.

1. Put the display in the lowest position and lock the height mechanism.

Image 2-10

2. Put the display face down on a clean and soft surface. Be careful not to damage the panel screen.

3. Remove the plastic cover with a flathead screw driver.

Installation

K5903146 /05 Nio Color 5MP14

Image 2-11

4. Slide the plastic cover over the neck of the foot.

Image 2-12

5. Remove the four screws fixing the foot while supporting the foot.

Image 2-13

6. Attach the arm stand firmly to the panel using 4 screws M4 x 8 mm.

2.4 First time starting up

Overview

You are now ready to start up your Nio Color 5MP for the first time.

1. Switch on your Nio Color 5MP as described in “Standby switching”, page 19.

2. Turn on the computer connected to your display.

Installation

K5903146 /05 Nio Color 5MP 15

If you have properly installed your display and display controller, the Windows start-up messages will appear

once the boot procedure is finished.

Your Nio Color 5MP will be running in a basic video mode at a default refresh rate when first time

starting up. If you are using a Barco display controller, please consult the user guide delivered with it

to install the drivers, software and documentation. When this is done, your display will automatically

detect the connected video input signal(s) and apply the correct video mode and refresh rate.

Installation

K5903146 /05 Nio Color 5MP16

Installation

17K5903146 /05 Nio Color 5MP

Daily operation 3

K5903146 /05 Nio Color 5MP18

3.1 Recommendations for daily operation

Optimize the lifetime of your display

Enabling the Display Power Management System (DPMS) of your display will optimize its diagnostic lifetime

by automatically switching off the backlight when the display is not used for a specified period of time. By

default, DPMS is enabled on your display, but it also needs to be activated on your workstation. To do this, go

to “Power Options Properties” in the “Control Panel”.

Barco recommends setting DPMS activation after 20 minutes of non-usage.

Use a screen saver to avoid image retention

Prolonged operation of an LCD with the same content on the same screen area may result in a form of image

retention.

You can avoid or significantly reduce the occurrence of this phenomenon by using a screen saver. You can

activate a screen saver in the “Display properties” window of your workstation.

Barco recommends setting screen saver activation after 5 minutes of non-usage. A good screen

saver displays moving content.

In case you are working with the same image or an application with static image elements for several hours

continuously (so that the screen saver is not activated), change the image content regularly to avoid image

retention of the static elements.

Understand pixel technology

LCD displays use technology based on pixels. As a normal tolerance in the manufacturing of the LCD, a

limited number of these pixels may remain either dark or permanently lit, without affecting the diagnostic

performance of the product. To ensure optimal product quality, Barco applies strict selection criteria for its LCD

panels.

To learn more about LCD technology and missing pixels, consult the dedicated white papers

available at www.barco.com/healthcare.

Enhance user comfort

Every Barco multi-head display system is color matched with the highest specifications in the market.

Barco recommends keeping color-matched displays together. Furthermore, it is important to use all

displays of a multi-head configuration at the same rate to preserve color matching throughout the

economic lifetime of the system.

Maximize quality assurance

The 'MediCal QAWeb' system offers online service for high-grade Quality Assurance, providing maximum

diagnostic confidence and uptime.

Barco recommends to install MediCal QAWeb Agent and apply the default QAWeb policy at least.

This policy includes calibration on regular intervals. Connecting to MediCal QAWeb Server offers

even more possibilities.

Learn more and sign up for the free MediCal QAWeb Essential level at www.barco.com/QAWeb.

3.2 Key indicator lights

About the key indicator lights

By default, the indicator lights of the keys will be dimmed which makes the keys unavailable at that moment.

To make the keys illuminate and available for further actions touch one of the keys. As a result, all keys will be

Daily operation

K5903146 /05 Nio Color 5MP 19

illuminated and are now available for further actions. However, if no further actions are taken within the

following 5 seconds, the keys will dim again.

The key auto-dim function can be disabled in the OSD menus. Please refer to “Key indicator lights”,

page 23 for detailed instructions on how to do this.

3.3 Standby switching

About standby switching

The connected power supply also provides a switch that can be used to turn the power completely

off. To use the display, please make sure to switch on this power supply. This can be done by

pushing the on/off switch on the power supply into the “│” position.

Switching on the display while it is in standby mode or vice versa can be done by:

1. Illuminate the keys as previously described.

2. While the keys are illuminated, touch the standby key for approximately 2 seconds.

As a result, the display will switch on or will switch to standby mode.

In case of a power outage recovery, your display will always start-up in the power mode it was in

before the power interruption (i.e. standby or on). This protects your display against inadvertent

image retention problems.

3.4 Bringing up the OSD menus

How to bring up the OSD menus

The OSD menu allows you to configure different settings to make your Nio Color 5MP fit your needs within

your working environment. Also, you can retrieve general information about your display and its current

configuration settings through the OSD menu.

Bringing up the OSD menus can be done by:

1. If not already done so, switch on the display as previously described.

2. Illuminate the keys as previously described.

3. While the keys are illuminated, touch the menu key.

As a result, the OSD main menu comes up. However, if no further actions are taken within the following 90

seconds, the OSD will disappear again.

The OSD menu auto-exit function can be disabled in the OSD menu. Please refer to “OSD menu

automatic close function”, page 22 for detailed instructions on how to do this.

3.5 Navigating through the OSD menus

How to navigate through the OSD menus

Navigating through the OSD menus can be done by:

• Use the left/right keys to move through the (sub)menus, change values or make selections.

• To go into a submenu or confirm adjustments and selections, use the menu key.

• Use the standby key to cancel adjustments or exit a (sub)menu.

Daily operation

K5903146 /05 Nio Color 5MP20

• Exit all OSD menus at once by touching the standby key for approximately 2 seconds.

The key icons are displayed above the keys, adapted to the function that it is used for (menu

dependent).

Overview key icons

Left, Right

Enter

Cancel

Standby (IEC 60417–5009)

Daily operation

Page is loading ...

Barco Nio Color 5MP MDNC-6121 User guide

Brand: Barco

Model: Nio Color 5MP MDNC-6121

Type: User guide

This manual is also suitable for

Nio Color 5MP (MDNC-6121)

Download PDF

report

Barco Nio Color 5MP MDNC-6121 User guide

This manual is also suitable for

Barco Nio Color 5MP MDNC-6121 User guide

Related papers

Other documents