BWJ1

LG BWJ1, BWJ2 User guide

  • Hello! I am an AI chatbot trained to assist you with the LG BWJ1 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Model name
BWJ1 BWJ2
Power on / off Set voice guide function
Derma LED Mask
Charge
Charge
on the
cradle
Charge
directly
on the
controller
b
c
d
a
b
c
a
DM
DM
d/M
DM
d
Press the 1 (power) button for a
short while.
Press the DM (Start/Pause) button for a
short while.
Start / Pause
DM
DM
DM
d/M
Language Setting
Press the 1 (power) button and the
DM (Start/Pause) button at the same time for a long
while (until the guide).
(Korean English Chinese)
Press the 1 (power) button for a
long while (until the guide).
(Voice guide
Sound effect guide
Turn off guide (mute)
)
Safety cautions
MBM66277325
y Stop using the device if there is smoke or an odor. In
such cases turn off the power immediately, pull out
the charging adapter and contact the service center.
y Always use the provided charging adapter.
y Damaged battery may cause explosion.
y Do not disassemble, repair, or remodel this product.
y Handle the power plug with dry hands.
y Do not make direct eye contact with LED light when
devices with LED is in operation. Excessive exposure
to the light can cause eye damage.
y Recommend using the product once a day. Using
more than twice a day may cause burning sensation
on skin.
y Before using the device, if you are currently
undergoing dermatology related treatment or have
skin problems, consult your dermatologist and then
use it.
y Pregnancy, menstruation, lactating women are not
recommended for use. (Unstable hormonal balance
may cause temporary skin trouble.)
y Do not use the device for purposes other than those
set out in this guideline.
BWJ1.DKOR_QSG_ENG_VOC��.indd 1,3-5 2018-06-11 �� 4:35:53
How to Use
a b
Wash the face. Apply basic skincare
products.
c
d/M
d
Connect the cable of
Derma LED Mask to the
port of the controller.
Turn on by pressing the
1 (Power) button.
e
Wear the Derma LED Mask as if wearing eye
glasses.
f
Press the DM (Start/Pause) button to begin
skincare.
If it does not work after wearing the mask, please let
your skin close adhere to the proximity sensor in the
middle of the wearing part.
BWJ1.DKOR_QSG_ENG_VOC��.indd 6,8-10 2018-06-11 �� 4:36:07
/