2. Omega
  3. OM-EL-CC

Omega OM-EL-CC Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Omega OM-EL-CC Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
e-mail: [email protected]
For latest product manuals:
www.omegamanual.info
OM-EL-CC-1 RANGE
Cold Chain Data Logging Solutions
Shop online at
omega.com
SM
User’s Guide
The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves
the right to alter specifications without notice.
Servicing North America:
U.S.A. Omega Engineering, Inc.
Headquarters: Toll-Free: 1-800-826-6342 (USA & Canada only)
Customer Service: 1-800-622-2378 (USA & Canada only)
Engineering Service: 1-800-872-9436 (USA & Canada only)
Tel: (203) 359-1660 Fax: (203) 359-7700
e-mail: [email protected]
For Other Locations Visit omega.com/worldwide
omega.com [email protected]
M-5665/0717
Shop online at omega.com
SM
e-mail: [email protected]
For latest product manuals: omegamanual.info
Your new logger comes ready to go.
Simply press and hold the buon unl the green LED lights up to start logging.
Now place your logger in the locaon you want to monitor.
Once logging, pressing the buon will light up an LED to give a quick indicaon of the
status. It will also add a marker to the data to show that you have checked it.
No alarms will be triggered in the rst 30 minutes to allow the logger to sele at the
monitored temperature.
Green single ash
The data logger is currently logging
No alarm has been triggered
No acon required
Red single ash
The data logger is currently logging
An alarm has been triggered!
Check alarm condion in PC soware
Green double ash
The data logger’s memory is full
No alarm was triggered
Plug your logger in to a PC, download
your readings and start a new session
Red double ash
The data logger’s memory is full
An alarm was triggered!
Plug your logger in to a PC, download
your readings, check alarm condion
and start a new session
No LEDs ash
The data logger is stopped or the baery is at
Check the logger’s status using the PC
soware
Preset high and
low alarm levels
Status LEDs
Push to start
2
1
OM-EL-CC-1 Range
Cold Chain Data Logging Solutions
CHILLED GOODS
ALARMS:
HIGH
LOW
8°C
2°C
STATUS:
FROZEN GOODS
ALARMS:
HIGH
LOW
-16°C
-20°C
STATUS:
RIPENING GOODS
ALARMS:
HIGH
LOW
14°C
12°C
STATUS:
OM-EL-CC-1-001
Chilled Goods
High Alarm 8°C
Low Alarm 2°C
High Alarm -16°C
Low Alarm -20°C
High Alarm 14°C
Low Alarm 12°C
OM-EL-CC-1-002
Frozen Goods
OM-EL-CC-1-003
Ripening Goods
When you are ready to view the recorded data on your logger, the rst thing you
need to do is download the free soware.
Visit www.omega.com and click on the download link.
To save your data, remove the logger from the plasc sleeve and connect it to a USB port.
Open the soware and click on Save Data.
This will automacally open up your readings in the soware, where you can view
your data or export it in various formats.
To start your logger for the next session, click on Prime Logger.
Double click on the downloaded .exe le, and follow the on screen prompts.
Your data logger is now primed and ready to go. Place your logger in locaon ready
for the next session. To start it logging again, press and hold the buon unl the
green LED lights up.
The OM-EL-CC-1
Range
5
4
3
Each of the three Cold Chain loggers comes pre-congured for use in your
parcular applicaon – simply press the buon to start logging. During a
logging session, pressing the buon will light up the status LEDs to give a quick
indicaon as to whether the temperature has exceeded an alarm condion at any
point. Once your session has been completed, tear open the IP67-rated plasc
wallet to reveal the USB connector and plug it in to your PC. Use the free soware
for Windows to download and graph the data, and then prime your logger for its
next use.
This unit can be quickly customized for use in mulple markets. If you have a specic monitoring applicaon, that requires dierent
sample rates or alarm thresholds, call us today.
• 3 data loggers for monitoring Chilled Goods, Frozen Goods
and Ripening Goods.
• No set-up required. One buon press-to-start logging.
• Pre-congured with appropriate sample rates and alarm thresholds
for each applicaon.
• Reusable with 12+ months baery life.
• Various export opons including PDF, Microso Excel and JPEG.
OM-EL-CC-1-Range
Cold Chain Data Logging Soluons
Omega CC Soware
The simple-to-use soware allows you to view the data
graphically, in a table or export it in various formats for use
in further reporng.
Download the latest version of the soware free of
charge from www.omega.com
Measurement range -30 to +60°C (-22 to +140°F)
Accuracy (overall error) ±0.5°C maximum (±1°F)
Resoluon 0.1°C (0.1°F)
Baery Life 12 months (minimum)
IP Rang IP67*
Readings 32,600
Chilled Goods Frozen Goods Ripening Goods
High Alarm Level
8°C -16°C 14°C
Low Alarm Level
2°C -20°C 12°C
Logging Interval
10 minutes (220 days) 10 minutes (220 days) 10 minutes (220 days)
Part Number
OM-EL-CC-1-001 OM-EL-CC-1-002 OM-EL-CC-1-003
SPECIFICATIONS
MODEL SPECIFIC
ACCESSORIES
OM-EL-CC-BAG: Pack of 5 waterproof bags for data logger during use.
YOUR OM-EL-CC-1
Start / Status buon
Status LEDs
USB connector
Tear to open
Mounng point
Model type
1
2
3
4
5
6
67 mm (2.6”)
48 mm (1.8”)
1
3
4
5
6
2
* The data logger is protected against moisture to IP67 standard when
housed in an OM-EL-CC-BAG or equivalent.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords
our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2016 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the
prior written consent of OMEGA ENGINEERING, INC.
FOR WARRANTY RETURNS, please have the
following information available BEFORE contacting
OMEGA:
1. Purchase Order number under which the product
was PURCHASED,
2. Model and serial number of the product under
warranty, and
3. Repair instructions and/or specific problems
relative to the product.
FOR NON-WARRANTY REPAIRS,
consult
OMEGA for current repair charges. Have
the following information available BEFORE
contacting OMEGA:
1. Purchase Order number to cover the COST
of the repair,
2. Model and serial number of the product, and
3. Repair instructions and/or specific problems
relative to the product.
RETURN REQUESTS/INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department.
BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED
RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID
PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return
package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent
breakage in transit.
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a
period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month
grace period to the normal one (1) year product warranty to cover handling and shipping time. This
ensures that OMEGA’s customers receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service
Department will issue an Authorized Return (AR) number immediately upon phone or written request.
Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no
charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser,
including but not limited to mishandling, improper interfacing, operation outside of design limits,
improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of
having been tampered with or shows evidence of having been damaged as a result of excessive corrosion;
or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating
conditions outside of OMEGA’s control. Components in which wear is not warranted, include but are not
limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However,
OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for
any damages that result from the use of its products in accordance with information provided
by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the
company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR
REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF
TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF
LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of
OMEGA with respect to this order, whether based on contract, warranty, negligence,
indemnification, strict liability or otherwise, shall not exceed the purchase price of the
component upon which liability is based. In no event shall OMEGA be liable for
consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic
Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical
applications or used on humans. Should any Product(s) be used in or with any nuclear installation or
activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility
as set forth in our basic WARRANTY/DISCLAIMER language, and, additionally, purchaser will indemnify
OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the
Product(s) in such a manner.
M-5665/0717
Where Do I Find Everything I Need for
Process Measurement and Control?
OMEGA…Of Course!
Shop online at omega.com
SM
TEMPERATURE
MU
Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies
MU
Wire: Thermocouple, RTD & Thermistor
MU
Calibrators & Ice Point References
MU
Recorders, Controllers & Process Monitors
MU
Infrared Pyrometers
PRESSURE, STRAIN AND FORCE
MU
Transducers & Strain Gages
MU
Load Cells & Pressure Gages
MU
Displacement Transducers
MU
Instrumentation & Accessories
FLOW/LEVEL
MU
Rotameters, Gas Mass Flowmeters & Flow Computers
MU
Air Velocity Indicators
MU
Turbine/Paddlewheel Systems
MU
Totalizers & Batch Controllers
pH/CONDUCTIVITY
MU
pH Electrodes, Testers & Accessories
MU
Benchtop/Laboratory Meters
MU
Controllers, Calibrators, Simulators & Pumps
MU
Industrial pH & Conductivity Equipment
DATA ACQUISITION
MU
Communications-Based Acquisition Systems
MU
Data Logging Systems
MU
Wireless Sensors, Transmitters, & Receivers
MU
Signal Conditioners
MU
Data Acquisition Software
HEATERS
MU
Heating Cable
MU
Cartridge & Strip Heaters
MU
Immersion & Band Heaters
MU
Flexible Heaters
MU
Laboratory Heaters
ENVIRONMENTAL
MONITORING AND CONTROL
MU
Metering & Control Instrumentation
MU
Refractometers
MU
Pumps & Tubing
MU
Air, Soil & Water Monitors
MU
Industrial Water & Wastewater Treatment
MU
pH, Conductivity & Dissolved Oxygen Instruments
/