Lascar Electronics EL-CC-1 Quick start guide

Brand
Lascar Electronics
Model
EL-CC-1
Type
Quick start guide
CHILLED GOODS
ALARMS:
HIGH
LOW
8°C
2°C
STATUS:
EasyLog CC
Quick Start Guide
Your new logger comes ready to go.
Simply press and hold the buon unl the green LED lights up to start logging.
Now place your logger in the locaon you want to monitor.
Preset high and
low alarm levels
Status LEDs
Push to start
CHILLED GOODS
ALARMS:
HIGH
LOW
8°C
2°C
STATUS:
2
1
When you are ready to view the recorded data on your logger, the rst thing you
need to do is download the EasyLog CC soware.
Visit www.easylogcc.com and click on the download link.
Double click on the downloaded EasyLog CC Installer.exe le, and follow the on
screen prompts.
3
To save your data, remove the logger from the plasc sleeve and connect it to a
USB port.
Open the EasyLog CC soware and click on Save Data.
This will automacally open up your readings in the EasyLogGraph soware, where
you can view your data or export it in various formats.
To start your logger for the next session, click on Prime Logger.
Your data logger is now primed and ready to go. Place your logger in locaon ready
for the next session. To start it logging again, press and hold the buon unl the
green LED lights up.
5
4
Once logging, pressing the buon will light up an LED to give a quick indicaon of the
status. It will also add a marker to the data to show that you have checked it.
No alarms will be triggered in the rst 30 minutes to allow the logger to sele at the
monitored temperature.
Green single ash
The data logger is currently logging
No alarm has been triggered
No acon required
Red single ash
The data logger is currently logging
An alarm has been triggered!
Check alarm condion in PC soware
Green double ash
The data logger’s memory is full
No alarm was triggered
Plug your logger in to a PC, download
your readings and start a new session
Red double ash
The data logger’s memory is full
An alarm was triggered!
Plug your logger in to a PC, download
your readings, check alarm condion
and start a new session
No LEDs ash
The data logger is stopped or the baery is at
Check the logger’s status using the
PC soware
CHILLED GOODS
ALARMS:
HIGH
LOW
8°C
2°C
STATUS:
FROZEN GOODS
ALARMS:
HIGH
LOW
-16°C
-20°C
STATUS:
RIPENING GOODS
ALARMS:
HIGH
LOW
14°C
12°C
STATUS:
For a full product data sheet, or for more informaon on the
whole EasyLog range visit www.lascarelectronics.com
EL-CC-1-001
Chilled Goods
High Alarm 8°C
Low Alarm 2°C
High Alarm -16°C
Low Alarm -20°C
High Alarm 14°C
Low Alarm 12°C
EL-CC-1-002
Frozen Goods
EL-CC-1-003
Ripening Goods
The EasyLog CC Range
Issue 1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Lascar Electronics EL-CC-1 Quick start guide

Brand
Lascar Electronics
Model
EL-CC-1
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents