Springdale Lighting TA100259 Operating instructions

Type
Operating instructions

This manual is also suitable for

v
ASSEMBLY INSTRUCTIONS:
Item No: STA11191
1. Remove all parts and carefully place on a level
surface.
2. Screw the socket-threaded rod (C) through the base
panel (B), secure panel in place using the provided
nuts and lock washers.
3. Attach columns (D) on an upright position onto base
panel (B) by screwing the legs (A) through the base
panel (B).
4. Once columns (D) are on base panel (B), slide side
panels (E) between the columns.
5. Insert bulb into bulb socket.
6. Attach top panel (G) onto columns and secure in
place using the screws (F) provided.
7. Place the center glass panel on the top panel (G).
Uses (1) Maximum 60WATT Type “A” Bulb
(Bulb not included)
Cleaning of your lamp
Unplug lamp, wipe with damp cloth.
Do not use abrasives.
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision 08/31/11
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
  • Page 1 1
  • Page 2 2

Springdale Lighting TA100259 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI