Work-pro HOME AMP User manual

Work-pro
Brand
Work-pro
Model
HOME AMP
Type
User manual

Work-pro HOME AMP is a high-quality audio amplifier designed to provide exceptional sound performance for a variety of applications. With its advanced features and versatile connectivity options, the HOME AMP is the perfect choice for home audio systems, commercial installations, and anywhere else where high-quality sound is required.

Key features of the HOME AMP include:

  • High-power output: The HOME AMP delivers up to 40 watts of power per channel into 8 ohms, providing ample power for driving even demanding speakers.
  • Wide frequency response: The HOME AMP has a wide frequency response of 20 Hz to 20 kHz, ensuring that all of your music will be reproduced with crystal-clear clarity and detail.

Work-pro HOME AMP is a high-quality audio amplifier designed to provide exceptional sound performance for a variety of applications. With its advanced features and versatile connectivity options, the HOME AMP is the perfect choice for home audio systems, commercial installations, and anywhere else where high-quality sound is required.

Key features of the HOME AMP include:

  • High-power output: The HOME AMP delivers up to 40 watts of power per channel into 8 ohms, providing ample power for driving even demanding speakers.
  • Wide frequency response: The HOME AMP has a wide frequency response of 20 Hz to 20 kHz, ensuring that all of your music will be reproduced with crystal-clear clarity and detail.
Due to the installation circumstances , sometimes
you need to place only one speaker on each zone
working in mono way.
For such situations, the solution is the connection in
Bridge mode.
Basically, we start with a balanced mono signal from an
audio source (CD player, MP3, etc.) or a preamp (mixer,
etc.). Each of the signals are sent to each Homeamp
(+ signal to Left channel and - signal to Right channel).
achieving two identical signals but 180º unphased,
amplifying each channel one of the semi-cycles
For load connection, we use both positive outputs,
achieving to sum both magnitudes.
The result is to double the power taking into account
that the minimum coupled load must be 8? .
Debido a las circunstancias de una instalación, algunas
veces es necesario colocar un solo altavoz en cada zona
funcionando en modo mono.
Para estas situaciones, la solución es el conexionado en
modo Bridge.
Básicamente, partimos de una señal mono balanceada desde
una fuente de audio (reproductor de CD, MP3, etc.) o un
preamplificador (mezclador, etc.). La señal es enviada a
a los canales de entrada de HomeAmp (Señal + a canal
derecho (Right) y señal - a canal izquierdo (Left) con lo que
se consigue una señal idéntica pero desfasada 180º, amplificando
cada canal uno de los semiciclos.
Para la conexión de la carga utilizamos ambas salidas
positivas consiguiendo la suma de ambas magnitudes.
El resultado es doblar la potencia, teniendo presente que la carga
mínima acoplada no debe ser inferior a 8? .
Esta tabla muestra la max. potencia
de salida a 8Ω de acuerdo al alimentador
conectado al HomeAmp.
Power Supply (V) Max. Power (8Ω)
24 V dc 32 W
27 V dc 36 W
30 V dc 40 W
This table shows the max. power
output at 8Ω according to the power
supply connected to the HomeAmp.
PSU
24-30V dc
GND
+
-
+
-
HomeAmp
(Rear connections)
(Conex.Traseras)
8Ω
Application Notes / Notas de Aplicación
HomeAmp
funcionando en modo Bridge
operating in Bridge mode
Balanced mono signal from external audio mixer
Señal mono balanceada procedente de un mezclador
de audio externo
Ejemplo de instalación usando HomeAmp para zonas individuales utilizando sólo un altavoz funcionando en modo Bridge:
(Un altavoz, 8Ω y modo mono).
Rev. 12.05.01
Power Supply Power Supply
HomeAmp
HomeAmp
Office 1 Office 2
Ceiling
Ceiling
Speaker
Speaker
Installation example using HomeAmp for individual zones using only one speaker working in Bridge mode:
(One speaker, 8 and mono way).Ω
Fuente
de Audio
Audio
Source
Alimentador Alimentador
Altavoz
de techo
Altavoz
de techo
Application Notes
HomeAmp
funcionando en modo Bridge
operating in Bridge mode
EQUIPSON, S.A. Avda. El Saler 14. Pol. Ind. L´Alteró (Silla) 46460 Valencia - Spain,
Tel. +34 96 121 63 01 - Fax +34 96 120 02 42 - / www.equipson.es[email protected]
  • Page 1 1
  • Page 2 2

Work-pro HOME AMP User manual

Work-pro
Brand
Work-pro
Model
HOME AMP
Type
User manual

Work-pro HOME AMP is a high-quality audio amplifier designed to provide exceptional sound performance for a variety of applications. With its advanced features and versatile connectivity options, the HOME AMP is the perfect choice for home audio systems, commercial installations, and anywhere else where high-quality sound is required.

Key features of the HOME AMP include:

  • High-power output: The HOME AMP delivers up to 40 watts of power per channel into 8 ohms, providing ample power for driving even demanding speakers.
  • Wide frequency response: The HOME AMP has a wide frequency response of 20 Hz to 20 kHz, ensuring that all of your music will be reproduced with crystal-clear clarity and detail.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents