RH Teen DOVETAIL SHADOW-BOX DRESSER MIRROR Assembly Instructions

Brand
RH Teen
Model
DOVETAIL SHADOW-BOX DRESSER MIRROR
Type
Assembly Instructions
page 1 of 2
D
OVETAIL SHADOW-BOX DRESSER MIRROR - ASSEMBLY INSTRUCTIONS
CARE INSTRUCTIONS:
1. DUST OFTEN USING A CLEAN, SOFT, DRY LINT-FREE CLOTH.
2. BLOT SPILLS IMMEDIATELY, AND WIPE WITH A CLEAN, DAMP CLOTH.
3. WE DO NOT RECOMMEND THE USE OF CHEMICAL CLEANSERS, ABRASIVE CLEANERS OR FURNITURE POLISH ON LACQUERED
FINISH.
PARTS INCLUDED:
TOOLS NEEDED (NOT INCLUDED):
Phillips-head screwdriver, hammer, drill and pencil.
A. WALL BRACKET (1 pc.)
B. HORIZONTAL-HANG BACK PANEL BRACKET (1 pc.)
C. VERTICAL-HANG BACK PANEL BRACKET (1 pc.)
1
2
3
Drywall Anchors
Level
1 pc.
6 pcs.
Bubble Level
6 pcs.
Wall Screws
NO. ITEM
DESCRIPTION
CORRECT
Figure 1
Figure 2
INCORRECT
QT Y.
wall
Wall
2
Wall
A
A
A
A
INSTALLATION INSTRUCTIONS:
1. Carefully remove all parts from the box, and remove
all plastic coverings.
2. There are two brackets fixed on the back panel of
the mirror and one wall bracket (A) for vertical or
horizontal installation.
3. Before drilling holes to affix the wall bracket (A),
place the bubble level into the groove of the wall
bracket to test and make sure the wall bracket is
level. Use the pencil to mark the holes' positions
on the wall.
4. Drill 6 holes into the wall that align with the holes
on wall bracket (A). Using a hammer, insert drywall
anchors by gently tapping on the anchors until they
are flush with the wall. Do not insert anchors into
wall studs.
1
SAFETY INSTRUCTIONS:
1. THESE INSTRUCTIONS ARE PROVIDED FOR YOUR
SAFETY. IT IS IMPORTANT THAT THEY ARE READ
CAREFULLY AND COMPLETELY BEFORE INSTALLING
THE FIXTURE.
2. PROFESSIONAL INSTALLATION IS STRONGLY
RECOMMENDED.
3. FOR YOUR SAFETY, IT IS RECOMMENDED THAT TWO
PEOPLE HANG THE FIXTURE.
4. CHECK WITH A PROFESSIONAL TO ENSURE YOUR
WALL CAN TOLERATE A FIXTURE WEIGHING 47 LBS.
5. IT IS IMPERATIVE THAT THE MIRROR IS MOUNTED
INTO A WALL STUD.
page 2 of 2
5. Put wall bracket (A) over the drywall anchors (figure 1).
Screw wall screws through the holes in the wall
bracket (A) and anchors (figure 2). Screw wall screws
directly into any wall studs.
6. To install mirror horizontally, slide the back panel bracket
(B) onto the wall bracket (figure 3). To install mirror
vertically, slide the back panel bracket (C) onto the wall
bracket (figure 4).
7. Installation is complete.
A
BACK
BACK
A
MIRROR WALL
A
B/C
C
B
Figure 3
Figure 4
B
C
DOVETAIL SHADOW BOX DRESSER MIRROR - ASSEMBLY INSTRUCTIONS
  • Page 1 1
  • Page 2 2

RH Teen DOVETAIL SHADOW-BOX DRESSER MIRROR Assembly Instructions

Brand
RH Teen
Model
DOVETAIL SHADOW-BOX DRESSER MIRROR
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents