Room Board Loft Floor Mirror Operating instructions

I've reviewed the provided instructions document for the LOFT Floor Mirror, which details the installation steps for its anti-tip hardware. I understand how to mark the wall, install the bracket, and attach the cable. I'm ready to answer your questions about the installation process.
Where should I place the mirror to start the installation?

What should I do after I marked the position of the top of the mirror?

How do I secure the mirror to the wall bracket?

LOFT FLOOR MIRROR

INSTRUCTIONS

Keep these instructions for future use

800.486.6554 | roomandboard.com 2/25/22

Anti-Tip Hardware Installation Instructions

Place the mirror at your desired location against the wall. With a pencil, make a mark on the wall at the center of the

top of the mirror.

Move the mirror away so you can see the pencil mark. Measure down two inches from the pencil mark and install

the provided wall bracket horizontally, so the Clevis pin holes are on the top and bottom of the wall anchor. Use the

included screws to install the bracket into a wall stud, or the included drywall anchors to install the bracket

into drywall.

Attach the free end of the cable to the wall bracket with the Clevis pin and hair pin.

Reposition the mirror in your desired location.