Radiatori 2000 120 LEGGERO T 1800/4 Instruction And Installation Booklet

Brand: Radiatori 2000

Model: 120 LEGGERO T 1800/4

Type: Instruction And Installation Booklet

This manual is also suitable for

Radiatori 2000 120 LEGGERO T 1800/4 is an electric towel radiator with a rated power of 2000 W. It is designed to dry fabrics washed with water. The radiator operates at 230V and belongs to class II and to the IPX4 electrical protection. It has a built-in microprocessor thermostat with a weekly program and a temperature regulation range of 7-35°C. The radiator comes with four brackets for wall mounting and eight Fischer plugs for concrete, whole bricks, hollow bricks, and compact stone. It has a side exit cable with a length of 1.20 meters and a total length of 2 meters.

LEGGERO

ELECTRIC

Instruction

and installation

booklet

The image refers to the 1500W white model.

CAUTION!!!

You can ﬁnd the link to the instruction video on the back cover.

LEGGERO ELECTRIC

Instruction and installation booklet

We disclaim all responsibility for any inaccuracies contained in this instruction

manual due to translation errors.

Customers are invited to check the material received before assembly or installation.

1Manufacturer's data pag 2

2Warnings and precautions pag 3

3pag 3

4Useful installation requirements pag 4

5Material in the packaging pag 5

6Preparations for wall support pag 5

7Technical details pag 6

8Appliance features pag 8

9Maintenance pag 8

10 Towel holder

pag 1011

Certiﬁcations pag 1512

Warranty and assistence pag 16

INDICE

MANUFACTURER’S DATA

Safe use

Manual thermostat: how to use

pag 9

Dear Customer,

Thank you for choosing us. Before installing and / or using the product, please

read this manual carefully regarding installation, use and correct maintenance.

This radiator is commercialized by:

RADIATORI 2000

via Francesca, 54/A

24040 Ciserano (BG)

[email protected]

Ph. +39 0354810182

IMPORTANT:

RADIATORI 2000 declines all responsibility in case of accidents caused by

incorrect use of the radiator which is not in line with the following instructions.

All RADIATORI 2000 radiators are rigidly tested according to the regulations

in force before leaving the factory.

RADIATORI 2000 reserves the right to make any technical or constructive

changes deemed necessary, without notice.

The construction features of the radiators distributed by RADIATORI 2000

are patented.

• The radiator operates at 230V. Make sure the system voltage matches.

• The radiator belongs to class II and to the IPX4 electrical protection; do not apply any

electrical connection ignoring these safety rules.

• Make sure you have the necessary power indicated on the sign plate because the radiator

works.

• This radiator is only intended for drying fabrics washed with water.

WARNING AND PRECAUTIONS

SAFE USE

Read all the following warnings and precautions carefully.

•

The protection system of this radiator is designed to prevent direct

access to the electric heating elements and must be kept in its position

during use.

The radiator may be used by children under the age of 8

and by persons with reduced physical, sensory or mental

abilities, or by lack of experience or necessary knowledge,

provided they are supervised or after receiving the instruc-

tions for using the appliance. and after understanding the

dangers inherent to it.

Children must not play with the appliance. Cleaning and maintenance

intended for the product must not be carried out by children without

supervision.

Children under 3 must be kept away from the appliance if they are not

continuously monitored.

Children aged between 3 and 8 years should only switch the appliance

on / off under conditions that it has been placed in the normal operating

position provided that it is supervised and has received instructions re-

garding safe use of the appliance and potential hazards related to the

use of the appliance.

•

•Children between the ages of 3 and 8 must not connect, adjust or clean

the appliance or perform maintenance on the appliance.

In models equipped with towel bar, do not load or hang excessive weights,

the structure capacity is calculated to support a maximum of 2 kg.

•

On models equipped with a towel bar, the minimum height from the ground

of these elements must not be less than 60 cm.

•

CAUTION!!!

INSTALLATION

L N B

line (brown) neutral (blue or grey) Fil pilote (black)

CAUTION!!!

Some parts of the product can reach a very high temperature and can cause

burns. Particular attention must be paid in presence of children and persons

with reduced physical, sensory or mental abilities.

Carefully read all instructions and measures

for proper radiator assembly.

• Make electrical connections only after ﬁxing the radiator to the wall.

• The ﬁttings must be made only by qualiﬁed and experienced personnel and must

be made in compliance with the regulations in force using certiﬁed materials.

• Do not attempt to handle the radiator body or electrical boxes.

If you have problems, contact your dealer. The supplied cable is made speciﬁcally for

the application. Do not attempt to replace this cable with any other inappropriate

cable.

• In the power supply unit, in accordance with the installation rules, a device must

be provided that ensures the omnipolar disconnection of the electrical network,

with a contact opening distance, which allows the complete disconnection of the

category conditions overvoltage III.

• In case the radiator charge is higher than the data plate of the control or control

system (contact of thermostat or control switch), interpose a properly sized power

release or counter.

• The power supply circuit of the appliance must be protected by a high sensitivity

differential protection device.

• For appliances without plug, observe the following colors:

WARNING!

The “FIL PILOT” is intended for radiators connected to the energy

management unit / chronothermostat. If the “FIL PILOT” cable is black it is

not used, the safety rules require it to be insulated and not connected to

the cable from the ground.

• Sectioning is mandatory.

• All contacts must be separated by at least 3 mm.

• It is mandatory that the power supply system to which the regulator is connected

has an extra-sensitive differential protection.

INSTRUMENTS NECESSAY FOR MOUNTING

MATERIALS CONTAINED IN THE PACKAGING

SUPPORT PREPARATION

•The radiator must not be positioned immediately under a ﬁxed socket.

•

The electric radiator must be installed away from any contact with water and the electrical

control and command devices must not be positioned within reach of people who are inside

bathtubs, showers or in contact situations in contact with water,

• In the bathroom, it can be installed in zone 3 (see ﬁgure 1) provided that the control

device can not be used by people while using the shower or bathtub.

• The electric cable must be connected to an outlet or connection block, which must be at

least 25 cm away from the ground (without intermediate plugs for devices sold without

plugs.

Figure 1: Classiﬁcation of the bathroom area

• Star screwdriver (in case of use of supplied sockets

• Drill;

• Wall drill D. 8 mm (If you use the plugs supplied).

• 4 brackets for wall mounting

• 8 ﬁscher for concrete, whole bricks, hollow bricks, compact stone.

Secure the radiator using the included fastening kit, the lower straight support

must be folded down and the hook must be pulled down using the adjusting screw

to lock the radiator.

TECHNICAL SHEET

Length of the side exit cable: 1.20 mt

Install the radiator at 20 cm from the ﬂoor. The object is not a built-in product.

If installed near a wall, respect the minimum distance of 10 cm to the left.

Since the thermostat is ﬁxed to the right, the distance from the wall to the right

must be at least 30 cm.

Fix the wall support in the opposite

direction to that of the other 3 to prevent

the wall radiator from tipping over.

MODEL 120 LEGGERO T 1800/3 120 LEGGERO T 1800/4

Rated power 1500 W 2000 W

Power supply 230V +/- 10% 50Hz

Insulation class CLASSE II

Protection degree IPX4

Dimensions L x H x P 355x1800x90 mm 475x1800x90 mm

Fixing holes

LfxHf 144x1467 mm 264x1467 mm

Total lenght 2mt / 3x1mmq

0 - 35°C

Storage temperature 0 - 50°C

Humidity 0 - 85 % without condensation

Regolation type Microprocessor thermostat with weekly program,

holding opening holes

7 - 35°C

Certiﬁcations

Content of the packaging 4 brackets for wall mounting - 8 Fischer for concrete,

whole bricks, hollow bricks, compact stone

DATA SHEET

Mod. 1800 - 3 elements Mod. 1800 - 4 elements

Sol Sol

Inside D

L = lenght

(bottom view)

H = height

(frontal view)

P = depth

(lateral view)

Lenght/type of electric

cable

Operating service

Temperature

regulation range

MODE D’UTILISATION

DU THERMOSTAT PROGRAMMABLE

IPX4: appliance protected from splashes of water

Classe II: double isolation

MAINTENANCE

•

If the power cord is damaged, it must be replaced by the manufacturer or its after-

sales service or by a person with similar qualiﬁcations, in order to prevent all risks.

•

In case of failure, contact your dealer. Do not alter the product in any way; any

disassembly or any opening compromise the safety of the product.

We do not accept any responsibility for accidents due to any type of manipulation

carried out on the electrical appliance.

• Do not work on the appliance during operation.

• Before carrying out any cleaning, make sure that the electric radiator is at room temperature

and that the circuit is disconnected.

•

Clean with damp cloths without using aggressive or abrasive detergents that could compromise

the painting of the appliance.

FEATURES OF THE APPLIANCE

MODEL LEGGERO 1800/3 LEGGERO 1800/4

Towel holder measures 383* 50 mm 504,5* 50 mm

TOWEL HOLDER

Two towel holders for each radiator can be mounted on model LEGGERO 3 and 4 elements,

The towel holders can be mounted at 600 mm or 1200 mm from the bottom of the radiator.

For assembly, screw the towel holder

with a screwdriver, inserting the screws in the

appropriate holes and already prepared on the radiators and on the bar.

OPTIONAL

METHOD OF USE

OF THE CHRONOTHERMOSTAT

1. STAND-BY

1. Stand-by

2. Mode

3. +

4. –

The internal thermostat has different operating modes, which can be selected

cyclically by the function button.

According to the COMMISSION REGULATION (EU)

2015/1188 of April, 28th 2015, the seasonal energy

eﬃciency of ﬁxed electric local space heaters with a

rated thermal input of more than 250 W is not less

than 38%.

In particular, the calculation formula:

ηs= ηs,on -10% + F (1) + F (2) + F (3) - F (4) - F (5)

with

F (2) = 7.0%: with electronic control of the room

temperature and weekly timer

F (3) = 1.0%: room temperature control with detection

of open windows

It results in:

ηs = 40% - 10% + 7% + 1% = 38%

In stand-by mode, the radiator does not work. The

screen shows the real time in the clock section of the

screen.

If the time and day are ﬂashing they are not valid for

working, they must be deﬁned by the user.

To switch from stand-by mode to another operating

mode, use the stand-by button (the ﬁrst from the

top) and keep it pressed for 2 seconds.

When you exit the stand-by mode, the last mode of

operation will be re-established and will appear on the

screen.

2. PROGRAM MODE

Fil pilote command:

1) Confort : set point = temperature of comfort mode.

2) Night reduction: set point = comfort -3.5°C

3) ECO1 : set point = comfort -1°C

4) ECO2 : set point = comfort -2°C

5) Antigelo : set point = 7°C

6) OFF : no temperature regulation, switch off. Stand-by mode.

3. “FIL PILOTE” MODE

NOTE:

6 command types are recognized.

When activated, the FIL PILOT status is indicated by the

corresponding arrow (in the top left corner of the screen).

A second arrow indicates the program mode selected.

«INSIDE» has a programmable thermostat 24 / 24h and 7/7 days,

the function is selected when the arrow relative to the clock

symbol is shown (the clock is at the bottom of the screen).

In the clock section is shown the time of day, while the daily

program is shown on the left of the screen.

The SET temperature is visible on the screen.

In this operating mode, the thermostat regulates the

temperature using the comfort or the night reduction

temperature, as programmed.

An arrow at the top of the screen indicates the actual mode

(comfort or night).

To program the thermostat, please refer to the corrisponding

paragraph.

To change the comfort and night temperature, select the comfort or night

button (MODE, second from above), then use the + and - buttons to change

the temperature parameters.

To change the comfort and night temperature, select the comfort or night mode

using the MODE button, then use the + and - buttons to change the temperature

parameters.

4. COMFORT MODE

5. NIGHT MODE

The comfort mode is set when the arrow on the left

indicates the sun symbol and the comfort temperature

appears on the screen.

In this operating mode, the chronothermostat regulates

the set temperature.

Use + and - buttons to program the comfort temperature.

The set temperature is used for both the weekly program

as comfort level and for the Fil Pilot mode as comfort set

point.

The night mode is set when the arrow on the right

indicates the moon symbol and the night temperature

appears on the screen.

Use + and - buttons to program the night temperature.

The set temperature is used for both the weekly program

as night level and for the Fil Pilot mode as night set

point.

6. ANTIFREEZE

7. WEEKLY PROGRAMMING 24H / 24 AND 7/7 DAYS

In antifreeze mode, the left arrow indicates the ice symbol,

and the antifreeze temperature, set at 7 ° C, appears on the

screen.

This mode of operation prevents the room from freezing

when the temperature is below 7 ° C.

To program the thermostat, ﬁrst select the program mode by using the MODE button

(second button from the top), until “PRO” appears on the screen.

Press the MODE button again for about 5 seconds, the letters FP (Programming

Function) will appear on the screen, and then the letters “PR” will allow you to access

the Programming Mode.

The message d1 (day 1) will appear on the screen and use the + and - buttons to

change the time.

With the + button, the function will be activated at

the desired time while it will stop during the hours

deﬁned using the “-” key.

Press the MODE button to conﬁrm the date

programming of this day (for example D1) and

select the other days d2, d3 .... D7.

Once you have entered the example of the

d2, press the MODE key until the word PRO

appears for a few seconds and repeat the above

operation.

The day of the week and the hours to be programmed are displayed on the screen.

The lower screen indicates the time interval to program: use + to use the

comfort temperature and - to use the night temperature. For each selection the time

interval will increase automatically.

To return to the day selection, press the MODE button.

Press the MODE button to save the weekly program at least 5 seconds until END appears.

8. SPECIAL FUNCTIONS

a. SET HOUR AND DAY

The thermostat clock can only be changed from

STAND-BY mode.

When in stand-by mode, please press the mode button

until the clock is activated.

If you press the MODE button for a few sec

screen shows the word SET.

Adjust the clock by using the + and - buttons,

and hold the button to change quickly.

Press the MODE button to conﬁrm the

conﬁguration and switch to adjust the day of the week

by keeping the MODE button pressed.

Use + and - to conﬁgure the day of the week (d1, d2

... d7).

Use the MODE button to conﬁrm and exit the setting.

b. OPEN WINDOW DETECTION

The function can detect the status of open windows,

the function is activated when the temperature drops

quickly (e.g. when a window is open in the room).

When the status of the open window has been

detected, “OPn” (OPEN) appears on the screen and

the radiator switches to anti-freeze mode at 7 ° C.

The status ends automatically if the window is closed

or by pressing the thermostat MODE button.

DISPOSAL

CERTIFICATIONS

The presence of a mobile container crossed out on the

product indicates that within the European Union all electric

and electronic products are subject to special collection at

the end of their life cycle. Do not dispose of these products

in unsorted municipal waste.

At the end of the life of the product, the appliance can’t be

disposed of in municipal solid waste but be delivered to a

special collection center in your region.

Alternatively, it can be returned to the distributor after the

purchase of a new radiator of the same type and use.

The separate collection of electrical and electronic equipment

is an integral part of a policy of preservation, protection and

improvement of the quality of the environment; it is aimed

at avoiding potential harmful effects on human health due to

the presence of dangerous substances classiﬁed as such by

European directives.

The manufacturer RADIATORI 2000 SPA Via Francesca 54 / A, Ciserano, 24040

(BG) ITALY.

On its own responsibility, declares that the models of electric heating radiators:

They are manufactured in accordance with the European directive:

Directive 2014/35/UE

And in accordance with the harmonized standards:

- EN 60335-1:2012 + A11:2014 + A13:2017: Safety of household electrical

appliances and similar, general regulations.

- EN 60335-2-30:2009 + A11:2012: Safety of household electrical

appliances and the like, Part 2: special requirements for electric

radiators.

- EN 60335-2-43:2003 + A1:2006 + A2:2008: Safety of household

electrical appliances and the like, Part 2: Particular requirements for

drying machines and towel warmers.

- EN 62233:2008

- EN 55014-1: 2000 + A1: 2001 + A2: 2002

- EN 61000-3-2: 2000

- EN 61000-3-3: 1995 +A1: 2001

- EN 55014-2: 1997 + A1: 2001

- EN 61000-4-2: 1995 +A1: 1999 +A2: 2001

- EN 61000-4-4: 1995 +A1: 2001 +A2: 2002

- EN 61000-4-5: 1995 +A1: 2001

- EN 61000-4-6: 1996 +A1: 2001

- EN 61000-4-11: 1994 +A1: 2001

120 LEGGERO T 1800/3

120 LEGGERO T 1800/4

WARRANTY AND ASSISTANCE

Technical assistance

The manufacturer reserves the right to make changes to its products that it deems

necessary or useful without compromising the essential characteristics of the products.

During the ﬁrst days of switching on, is it possible to hear a slight buzz from the appliance due to

the settling of the material inside.

This does not imply any problem related to the security of the object.

The aluminum alloy body is guaranteed against manufacturing defects for 10

years from the date of purchase.

The electrical and electronic components are guaranteed for 2 years from the

date of purchase of the radiator.

The warranty is valid if the product remains intact, without any alteration or

modiﬁcation.

The warranty is valid from the date of sale.

It is therefore necessary to keep the invoice or receipt to prove the date of

purchase.

For technical assistance, contact your installer.

CAUTION !!!

For the validity of the warranty, the installation must comply with the standards

and laws in force and must be performed in a professional manner.

The manufacturer reserves the right to make changes to its products which it

deems necessary or useful without compromising the essential characteristics.

NOTES

Pleas watch the video with the INSIDE

chronothermostat programming instructions.

By scanning the QR CODE with a smartphone

(IOS & Android) is it possible to watch the video.

For any problems related to the operation of the

radiator or to the programming of the electronics,

please contact:

customerservice@radiatori2000.it

All instructions and installation booklets

are available in PDF format at the link:

https://www.radiatori2000.it/download/

in the

COMPANY BROCHURE & INSTRUCTIONS MANUALS

REV 1-

11-2019

Radiatori 2000 120 LEGGERO T 1800/4 Instruction And Installation Booklet

Brand: Radiatori 2000

Model: 120 LEGGERO T 1800/4

Type: Instruction And Installation Booklet

This manual is also suitable for

Download PDF

report

Radiatori 2000 120 LEGGERO T 1800/4 Instruction And Installation Booklet

This manual is also suitable for

Radiatori 2000 120 LEGGERO T 1800/4 Instruction And Installation Booklet

Other documents