2. Computers & electronics
  3. Audio & home theatre
  4. TV signal amplifiers
  5. Channel Vision
  6. SAT-20DB

Channel Vision SAT-20DB Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Channel Vision SAT-20DB Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
234 FISCHER AVENUE •COSTA MESA, CA 92626
(714) 424-6500  (800) 840-0288  (714) 424-6510 fax
www.channelvision.com  email: [email protected]
© 2005, CHANNEL VISION
™
Sat-20dB
Channel Vision Technology
3/22/05
Channel Vision’s Sat-20dB in-line satellite amplifier is a great problem solver. It should be installed when
there are long runs between the Satellite Dish and receiver. Using the power that is already on the coax, it
provides 20dB of amplification to help maintain the integrity of your satellite signals over those extra long
runs.
Specifications:
Noise Figure@70F:
RFI Shielding:
Nominal Impedance:
Supply Voltage:
Power Consumption:
(typical)
5dB
100dB
75 ohms
14-18VDC/75mA*
3W
Frequency Range:
Gain: Min. Typ.
Return Loss (I/O):
950MHz-2150MHz
950 - 1450MHz 19dB 20dB
1450 - 1850MHz 19dB 20dB
1850 - 2150MHz 18dB 19dB
950-1450MHz 8
*Power supplied by the satellite receiver. No additional power supply is needed.
Specifications subject to change without notice.
-5dB - dB
1450 - 1850MHz -5dB -8dB
1850 - 2150MHz -12dB -14dB
/