2. Vehicles & accessories
  3. Motor vehicle accessories & components
  4. Motorcycle Accessories
  5. TRUE FINE
  6. TD10038W
TD10038W

TRUE FINE TD10038W User manual

  • Hello! I've reviewed the provided instruction manual for the 3-Light Vanity Light. This document guides you through the assembly process, from checking the contents to installing the light bulbs. It highlights safety precautions and lists all necessary parts and tools. I'm here to answer any questions you may have about the assembly or the product itself.
  • What should I do before beginning installation?
    What are the minimum supply conductor requirements?
    How many glass shades are included?
    What tools are needed for assembly?
Instruction Manual
3-Light Vanity Light
Customer Service: [email protected]
PACKAGE CONTENTS
DESCRIPTION QUANTITY
AFixture 1
BGlass shade 3
CScrew 6
DSemicircle part 6
PART
Mounting plate
(Not actual size)
B
AA B
BB B B
CC DD
HARDWARE CONTENTS(shown actual size)
SAFETY INFORMATION
WARNING
PREPARATION
Long
monting
screw
x 2
Long
monting
screw
x 2 x 1
x 3
Wire nut
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
• TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before
beginning installation by removing fuse (or switching off circuit breaker).
• MINIMUM 90°C SUPPLY CONDUCTORS.
Estimated Assembly Times: 25 minnutes
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver,
Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Print in china
A
C
D
B
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
2.
6.
Attach the mounting plate (DD) to the
outlet box (not included) with the long
mounting screws (CC).
Install light bulbs (not included). Use three
standard-base bulbs.
2
Hardware Used
Long mounting screw
Mounting plate
x
2
x
1
3
CC
DD
BB
3. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers
(not included), black to black (power) and
white to white (neutral). Attach copper
wire to ground wire. Helpful hint:
If necessary, attach copper ground wire
to grounded outlet box.
36
4
BB
4. Attach wire nuts (BB).Tape wire nuts (BB)
and wires together.
Print in china
Hardware Used
x
Wire nut
B
DD
CC
5. Align the 2 screws(AA) through the holes
of the back plate, and fix them with screw
nuts
Hardware Used
5
AA
DD
A
DD
AA
Long mounting screw
Mounting plate
x 2
x 1
1. Put glass shade (B) onto fixture (A), clamp
the glass shade (B) with semicircle part (D),
and finally lock it with screw (C).
1
A
B
C
D
/