F97

IQUNIX F97 User guide

  • Hello! I've reviewed the user guide for the IQUNIX F97 mechanical keyboard. This document details how to connect the keyboard via Bluetooth, 2.4GHz and wired modes. It also explains various function key combinations, backlight settings and special keys for different scenarios. I'm ready to assist with any questions you have about your device.
  • How do I pair my keyboard via Bluetooth?
    How to check the battery level?
    How do I switch between Mac and Windows layouts?
MECHANICAL KEYBOARDS
F97 SERIES
Please read this manual guide and cautions
to ensure that using this product correctly. Start Reading
User Guide
Details
Product Specification
Product Name: F97
Keyboard Type: Mechanical Keyboard
Key Quantity: 100 Keys
Connect Interface: USB Type-C
Dimensions: 372*123.5*43mm
Brand: IQUNIX
Origin: China
Web: www.IQUNIX.store
Support E-mail:
A Type-C Port C Feet D Mode Switch E Silicone PadsB Indicator
Three Ways of Connecting Devices
Bluetooth Mode
IQUNIX F97 BT 1
Add a Bluetooth Device
➊ Toggle the keyboard Mode Switch to the wireless side.
➋ Press FN+1, then hold FN+1 for 5 seconds if the indicator blinks in blue
light.(Bluetooth pairing mode on when blue light blinks.)
➌ Enable Bluetooth Pairing (Computer / Phone / Tablet)
➍ Select the pairing device 【IQUNIX F97 BT 1】
➎ Indicator light turns off when the keyboard is paired successfully.
In order to complete the pairing of the keyboard with a second or third new
Bluetooth device, repeat the instructions from Step ② and replace the
"FN+1" with "FN+2" or "FN+3".The devices will be shown as
【IQUNIX F97 BT 2】and 【IQUNIX F97 BT 3】.
2.4GHz Mode
➊ Toggle the keyboard Mode Switch to the wireless side.
➋ Plug the 2.4GHz receiver into your computer.
➌ Press FN+4 to enter 2.4GHz pairing mode
(2.4GHz pairing mode on when pink light blinks.)
➍ Indicator light turns off when the keyboard is paired successfully.
Wired Mode
➊ For Wireless Version, toggle the keyboard Mode Switch to wired side.
➋ Plug the USB cable into your device.
My Computer
Browser Calculator
Play/Pause Mute
Previous Next Volume -
Volume +
Task
Manager
F3 F4 F5 F6 F7 F8 F9 F10 F11 F12
FN
FN
PGUP PGDN
-
+
ENTER
Backlight
On/Off
Brightness +
Brightness -
Backlight Effects
Switching
Backlight Colors
Switching
Function Keys Combinations(Windows)
Backlight Keys Combinations (RGB Version)
FN
Hold FN First,
then Yellow Keys
FN
Hold FN First,
then Yellow Keys
Bluetooth
Device #1
Bluetooth
Device #3
Bluetooth
Device #2
Switch to
2.4GHz Mode
Battery Level Check
The LED Indicator blinks 1, 2, 3,…10 times,
which stands for 10%, 20%, 30%,…100% battery level
TAB
B
FN
Reset to Default
SCR LK Pause
Insert
WinLockSwap CapsLock
and Left Ctrl
Mac/Windows
Layout Switching
TAB
CAPSLOCK
WIN
PRT
SC DEL HOME
FN
Special Keys Combinations (Wireless Mode)
Special Keys Combinations (Hold for 5 Seconds)
FN
Hold FN First,
then Yellow Keys
FN
Hold FN First,
then Yellow Keys
LED Indicator Status Description
Device Charging and Battery Status
Less than 10%
(Wireless Mode)
Red Light Blinking
Charging
Yellow Light
Blinking 3 Times
Charging Completed
(Wired Mode)
Green Light
Blinking 3 Times
Charging Completed
(Wireless Mode)
Green Light On
Bluetooth Device Pairing
Bluetooth Device
#1 Pairing On
Blue Light Flashing
Bluetooth Device
#2 Pairing On
Turquoise Light
Flashing
Bluetooth Device
#3 Pairing On
Yellow Light
Flashing
2.4GHz Mode
Entering 2.4GHz Mode
Pink Light Flashing
Devices Re-Connecting
Bluetooth Device #1
Re-Connecting
Blue Light Blinking
Bluetooth Device #2
Re-Connecting
Turquoise Light Blinking
Bluetooth Device #3
Re-Connecting
Yellow Light Blinking
2.4GHz Device
Re-Connecting
Pink Light Blinking
Special Status
Special Keys
Combination Enabled
White Light
Blinking 3 Times
Reset to Default
White Light
Blinking 5 Times
CapsLock On
White Light On
Mac/Windows Layout Switch
Hold for 5 seconds to switch the layout between macOS and windows systems
CTRLALTWIN ALT FN
CMDOPT CMD OPT
To learn more details, please reach out
to us on official website or social media.
Official website: www.IQUNIX.store
/