Kogan KAKIDSLAPDESK User guide

Type
User guide
KID'S EVERYWHERE LAP
DESK FOR IPAD & LAPTOP
KAKIDSLAPDESK
A Base
B Arm
C Holder
COMPONENTS
Attach the Arm to the Base
Match the Red Triangle and Green Circle on the Arm (B) to the corresponding symbols on
the Base (A) then insert the Arm (B) into the slot in the Base (A), until you hear a click.
Attach the Arm to the Holder
Match the Red Triangle and Green Circle on the Arm (B) to the corresponding symbols on
the Holder (C) then insert the Arm (B) into the slot in the Base (C), until you hear a click.
ASSEMBLY
Removing the Base
Press down on the tab and then remove the arm by pulling upwards.
Removing the Holder
Press down on the tab and then remove the arm by pulling upwards.
Storage and Disassembly
Align the slots on the base and arm with the posts on the back of the holder, then press
firmly until the lock together in.
Before assembling, gently pull the arm and base away from the holder.
Using the Holder without the Stand
Open the support bracket on the rear of the holder (C) and place it on a desktop.
Place the iPad or Laptop on the holder.
Use the clamps on the holder to secure books and document in place.
OPERATION
Using the Holder with the Stand
Press and hold the button to adjust the holder to the desired position, then pull out the
brackets and place the laptop/tablet on it.
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Kogan KAKIDSLAPDESK User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI