2. CON-SERV
  3. CON-SERV AL 450 VL Anti-ligature Grab Rail

CON-SERV CON-SERV AL 450 VL Anti-ligature Grab Rail User manual

  • Hello! I've reviewed the Installation Instructions for the AL 450 VL anti-ligature grab rail. This document outlines the steps for proper installation using the provided screws and wall plugs and a Torx screwdriver. I'm here to answer your questions about this product.
  • What type of screws are included?
    Is it ok to install on the masonry walls?
    What tool do I need for installation?
Anti-ligature Grab Rail (AL 450 VL)
INSTALLATION INSTRUCTIONS
Place the wall bracket on the wall and mark the location for
installation.
Using the screws supplied, attached the bracket to the wall.
NOTE: Use plugs for masonry wall only
AL 450 VL Mii H095 R0
123
TORX SCREWDRIVER
4x TEE SCREW
4x WALL PLUG
Anti-ligature Grab Rail (AL 450 VL)
INSTALLATION INSTRUCTIONS
Place the wall bracket on the wall and mark the location for
installation.
Using the screws supplied, attached the bracket to the wall.
NOTE: Use plugs for masonry wall only
AL 450 VL Mii H095 R0
123
TORX SCREWDRIVER
4x TEE SCREW
4x WALL PLUG
Anti-ligature Grab Rail (AL 450 VL)
INSTALLATION INSTRUCTIONS
Place the wall bracket on the wall and mark the location for
installation.
Using the screws supplied, attached the bracket to the wall.
NOTE: Use plugs for masonry wall only
AL 450 VL Mii H095 R0
123
TORX SCREWDRIVER
4x TEE SCREW
4x WALL PLUG
Anti-ligature Grab Rail (AL 450 VL)
INSTALLATION INSTRUCTIONS
Place the wall bracket on the wall and mark the location for
installation.
Using the screws supplied, attached the bracket to the wall.
NOTE: Use plugs for masonry wall only
AL 450 VL Mii H095 R0
123
TORX SCREWDRIVER
4x TEE SCREW
4x WALL PLUG
/