P .5
LED up to 40pcs
FAI race specification
According to FAI competition requirements
- 40 LEDs minimum for a quadcopter
(32 LEDs minimum for a tri-copter)
distributed evenly so that the aircraft can be seen
clearly from any direction.
Recommended layout: 4 on bottom and
4 on top of each arm of the model
+ 8 on the sides of the body.
- Colours: Blue - Green - Orange - Pink - Purple - Red - Yellow
- RGB controller to program the assigned colour before each race.
Video system
- The VTX must be set with 25 mW maximum power emission.
Flight Controller led pads share with 5V/2A
We recommend the use of 3535 LED strips as these are lighter weight,
lower power consumption, yet provide ample light for FAI races.
Power consumption:
please calculate yourself and take the risk
LED
led 3535 (40pcs)
led 5050 (40pcs)
Camera
runcam racer nano 2
foxeer predator nano 4
VTX
tbs unify pro 32 nano
RX
tbs tracer rx
tbs crossfire nano rx
blue / green / red
0.6 A
0.75 A
0.1 A
0.115A ±15%
25mW
0.21 A
0.2 A
0.002 A
other colors
yellow
1.1 A
1.35 A
100 mW
0.28 A
white
1.4 A
1.95 A
100 mW
0.39 A
our test unit (red words above, total 1.61 A) are within the safety range
