Cocoon DY180381 Quick start guide

Scan this code

or search for

Cocoon Connect

Only remove battery tabs or plug in sensor when beginning to connect

that device

Follow steps 4 - 6 for each device you want to set up

ONLY TURN ON ONE DEVICE AT A TIME

The LED on each of the Smart Security Devices should be

flashing twice per second

If not, press the Reset Button on the device and hold for six

seconds. The LED should now flash twice per second

Before you begin, make sure you have:

1. A mobile device - Android (V4.1 or later) or iOS (V8 or later)

2. Each of your Security Sensors

3. A Wi-Fi connection (have the password handy)

4. Download the Cocoon Connect app

For detailed instructions and videos, visit www.cocoonproducts.com.au

First time users:

3. Connect One device

at a Time

4. Begin pairing mode

1. BEFORE YOU START 2. App Setup

1. Add device manually

2. Select Sensor & Security

Door Sensor = Door / Window Sensor

Motion Sensor = Sensor (Wi-Fi)

Siren = Alarm (Wi-Fi)

ONLY ADD ONE DEVICE AT A TIME

Each Smart Security device will stop flashing to indicate it has

been paired successfully

2. SELECT SMART

DEVICE

1. ADD NEW

DEVICE

If you have any issues with this step, ensure your password is correct

If you are still having issues, please check your Instruction Manual

Use, manage and control your Smart Security Kit from the Cocoon

Connect app

5. Add the device 6. Connect device to Wifi 7. device added successfully 8. control your devices