Sony HT-M77 User manual

Category
Audio tuners
Type
User manual

This manual is also suitable for

4-489-714-11(3)
HT-M77/HT-M55/HT-M22
Home Theatre
System
Operating Instructions
2
GB
To reduce the risk of fire or
electric shock, do not expose this
apparatus to rain or moisture.
To reduce the risk of fire, do not cover the
ventilation opening of the appliance with
newspapers, tablecloths, curtains, etc.
Do not expose the appliance to naked flame
sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do
not expose this appliance to dripping or
splashing, and do not place objects filled with
liquids, such as vases, on the appliance.
Do not install the appliance in a confined
space, such as a bookcase or built-in cabinet.
As the main plug is used to disconnect the unit
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main
plug from the AC outlet immediately.
Do not expose batteries or appliances with
battery-installed to excessive heat, such as
sunshine and fire.
The unit is not disconnected from the mains as
long as it is connected to the AC outlet, even
if the unit itself has been turned off.
To prevent injury, this apparatus must be
securely attached to the floor/wall in
accordance with the installation instructions.
This symbol is intended to
alert the user to the presence
of the Hot Surface that may be
hot if it is touched during the
normal operation.
For customers in Australia
and India
Disposal of Old
Electrical & Electronic
Equipment
(Applicable in the
European Union and
other European
countries with
separate collection
systems)
About This Manual
The instructions in this manual are for
models HT-M77, HT-M55 and HT-M22. In
this manual, the HT-M77 is used for
illustration purposes unless stated
otherwise. Any differences in operation are
marked in the manual as “HT-M77 only”.
The instructions in this manual describe the
operation of the receiver with the supplied
remote control. You can also use the buttons
or knobs on the receiver if they have the
same or similar names as those on the
remote control.
This receiver incorporates Dolby* Digital and
Pro Logic Surround and the DTS** Digital
Surround System.
* Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
** Manufactured under license under U.S.
Patent Nos: 5,956,674; 5,974,380;
6,226,616; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS,
the Symbol, & DTS and the Symbol
together are registered trademarks & DTS
Digital Surround | 96/24 is a trademark of
DTS, Inc. Product includes software. ©
DTS, Inc. All Rights Reserved.
WARNING
On copyrights
3
GB
This receiver incorporates High-Definition
Multimedia Interface (HDMI
TM
) technology.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
iPhone and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of
Apple Inc.
All other trademarks and registered
trademarks are of their respective holders. In
this manual, ™ and ® marks are not specified.
“Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been designed
to connect specifically to iPod or iPhone,
respectively, and has been certified by the
developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards. Please note that the use
of this accessory with iPod or iPhone may
affect wireless performance.
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or other
countries.
This product is protected by certain
intellectual property rights of Microsoft
Corporation. Use or distribution of such
technology outside of this product is
prohibited without a license from Microsoft or
an authorized Microsoft subsidiary.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
“x.v.Color (x.v.Colour)” and “x.v.Color
(x.v.Colour)” logo are trademarks of Sony
Corporation.
“BRAVIA” is a trademark of Sony
Corporation.
“PlayStation” is a registered trademark of
Sony Computer Entertainment Inc.
“WALKMAN” and “WALKMAN” logo are
registered trademarks of Sony Corporation.
MICROVAULT is a trademark of Sony
Corporation.
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Sony
Corporation is under license.
Other trademarks and trade names are those of
their respective owners.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
Android
TM
and Google Play
TM
are trademarks
of Google Inc.
4
GB
About This Manual ........................2
Unpacking .....................................5
Description and location of
parts .........................................7
Getting started .............................13
Connections
1: Installing the speakers .............15
2: Connecting the speakers ..........17
3: Connecting the TV ..................18
4: Connecting other
equipment ..............................19
5: Connecting the antennas
(aerials) .................................23
Preparing the Receiver
Setting the voltage selector .........24
Connecting the AC power cord
(mains lead) ...........................24
Turning on the receiver ...............24
Adjusting the speaker levels and
balance (TEST TONE) .........25
Basic Operations
Playing an input source
equipment ..............................26
Playing a USB device
(Except for South Africa
and Argentina models) ..........27
Tuner Operations
Listening to FM/AM radio ..........30
Presetting FM/AM radio stations
(Preset Memory) ...................31
Enjoying Sound Effects
Selecting the sound field .............33
Adjusting the equalizer ................33
Resetting sound fields to the
default settings ......................34
Using Bluetooth
Features
About the Bluetooth wireless
technology ............................ 34
Connecting a smartphone with
One-touch (NFC) .................. 37
Using “SongPal” via
Bluetooth .............................. 39
“BRAVIA” Sync Features
What is “BRAVIA” Sync? ......... 39
Preparing for the “BRAVIA”
Sync ...................................... 40
One-Touch Play .......................... 41
System Audio Control ................ 41
System Power-Off ...................... 42
Scene Select ................................ 42
Adjusting settings
Using the settings menu .............. 43
LEVEL settings menu ................. 45
SPEAKER settings menu ........... 46
EQ settings menu ........................ 46
TUNER settings menu ................ 46
AUDIO settings menu ................ 46
HDMI settings menu ................... 47
BT settings menu ........................ 48
SYSTEM settings menu ............. 48
Viewing information on the
display panel ......................... 49
Reverting back to the factory
default settings ...................... 49
Additional Information
Precautions .................................. 50
Troubleshooting .......................... 52
Specifications .............................. 58
Index ........................................... 64
Table of Contents
5
GB
Unpacking
Operating Instructions (this manual)
•Quick Setup Guide
Remote control (1)
R6 (size AA) batteries (2)
•AC plug adaptor (1)
(Latin America model only)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
HT-M77 only
Receiver (STR-KM77) (1)
Speaker system
Front speaker (2)
Center speaker (1)
Surround speaker (2)
Surround back speaker (2)
Subwoofer (2)
Speaker cords (6) (red (1), white (1), blue
(1), gray (1), purple (2))
Foot pads
–(Big) (8)
(Small) (12)
HT-M55 only
Receiver (STR-KM55) (1)
Speaker system
Front speaker (2)
Center speaker (1)
Surround speaker (2)
Subwoofer (2)
Speaker cords (4) (red (1), white (1),
purple (2))
Foot pads
–(Big) (8)
(Small) (12)
HT-M22 only
Receiver (STR-KM22) (1)
Speaker system
Front speaker (2)
Center speaker (1)
Surround speaker (2)
Subwoofer (1)
Speaker cords (purple) (1)
Foot pads
(Big) (12)
(Small) (12)
6
GB
Insert two R6 (size-AA) batteries
(supplied) in the remote control. Observe
the correct polarity when installing
batteries.
Do not leave the remote control in an extremely
hot or humid place.
• Do not use a new battery with old ones.
Do not mix manganese batteries and other kinds
of batteries.
• Do not expose the remote control sensor to
direct sunlight or lighting apparatuses. Doing so
may cause a malfunction.
If you do not intend to use the remote control for
an extended period of time, remove the batteries
to avoid possible damage from battery leakage
and corrosion.
• When the receiver no longer responds to the
remote control, replace all the batteries with
new ones.
Inserting batteries into
the remote control
Notes
7
GB
Description and location of parts
* Except for South Africa and Argentina models.
A ?/1 (on/standby) (page 24, 34, 49)
B INPUT SELECTOR (page 29, 31, 32,
35, 36, 53)
C INPUT SELECTOR indicator
Flashes when you change the input
source.
D (N-Mark) (page 37)
Position the NFC-compatible device
near this indication to activate the NFC
function.
E M-TURBO indicator
Lights up when M-TURBO is
activated.
F Display panel (page 8)
G MUSIC/MOVIE, GAME, FÚTBOL
(Latin America and Argentina
models only)/FOOTBALL (other
models) (page 33)
H Remote control sensor
Receives signals from remote control.
I MASTER VOLUME (page 25, 26, 29,
52, 54)
J MASTER VOLUME indicator
Flashes when you adjust the volume.
K (USB) port (page 23)
L M-TURBO (page 11)
M SPEAKER SETTINGS (page 12)
Front panel
8
GB
A D.RANGE
Lights up when Dynamic Range
Compression is activated (page 45).
B BT
Lights up when Bluetooth device is
connected (page 36).
C Input indicator
Lights up to indicate the current input.
OPT
Lights up when “OPT 1” or “OPT 2” is
selected.
COAX
Lights up when “COAX” is selected.
HDMI
The receiver recognizes the equipment
connected via an HDMI IN jack.
ARC
TV input is selected and the Audio
Return Channel (ARC) signals are
detected.
D DTS indicator
Lights up the respective indicator
when the
receiver is decoding the
corresponding DTS format
signals.
E Dolby Pro Logic indicator
Lights up when the receiver performs
Dolby Pro Logic processing. This
matrix surround decoding technology
can enhance input signals.
F LPCM
Lights up when the receiver is
decoding the Linear PCM signals.
G ST
Lights up when the receiver tunes to a
stereo broadcast.
H D
Lights up when the receiver is
decoding Dolby Digital signals.
I SLEEP
Lights up when the Sleep Timer is
activated (page 11).
J Playback indicator
Lights up the respective indicator
when the playback option is activated.
SHUFFLE
REPEAT
K USB*
Lights up when USB device is
connected.
* Except for South Africa and Argentina models.
Indicators on the display panel
DTS
DTS
DTS 96/24
DTS 96 kHz/24 bit
PL II
Dolby Pro Logic II
9
GB
A DIGITAL INPUT/OUTPUT section
B SPEAKERS section (page 17)
C AUDIO INPUT section
D TUNER section
Rear panel
2 is different
depending on the
model. See below.
HDMI IN/OUT jacks
(page 18, 21)
OPTICAL IN jacks
(page 18, 22)
COAXIAL IN jack (page 22)
Speaker jacks
Subwoofer jack(s)
AUDIO IN jacks
(page 22)
FM ANTENNA jack
(page 23)
AM ANTENNA terminal
(page 23)
Red (R)
White (L)
10
GB
*
Use the supplied remote control to operate this receiver and Sony TV.
South Africa and Argentina
models only
Other models
* FÚTBOL (Latin America and Argentina models only)/FOOTBALL (other models).
Remote control
11
GB
A ?/1 (on/standby)
Turns the receiver on or sets it to
standby mode.
Saving the power in standby mode
When “CTRL: HDMI” is set to
“CTRL OFF” (page 44).
B TV ?/1
(on/standby)
Turns the TV on or sets it to standby
mode.
C INPUT SELECTOR
Selects the equipment you want to use.
When you press any of the INPUT
SELECTOR buttons during standby
mode, the receiver turns on.
D Sound field buttons (page 33)
E AUTO STANDBY
(South Africa and Argentina models
only) (page 48)
SLEEP
Sets the receiver to turn off
automatically at a specified time.
Each time you press SLEEP, the
display changes cyclically as follows:
0-30-00 t 1-00-00 t 1-30-00
t 2-00-00 t OFF
When Sleep Timer is being used,
“SLEEP” indicator lights up on the
display panel.
To check the remaining time before the
receiver turns off, press SLEEP. The
remaining time appears on the display panel.
If you press SLEEP again, the Sleep Timer
will be canceled.
F EQ BASS
Adjusts the bass level (page 33).
EQ TREBLE
Adjusts the treble level (page 33).
G SPEAKERS TV AUDIO
Selects whether TV sound is output
from the system’s speaker or the TV’s
speaker(s). This function works only
when you set the control for HDMI
function to on (page 44).
H CTRL: HDMI
Turns the Control for HDMI function
on or off (page 47).
I DISPLAY
Views information on the display
panel.
J
Press V/v/B/b to select the menu items
then press to enter/confirm the
selection.
K TUNING MEMORY (page 31)
L M-TURBO
Turns the M-TURBO function on or
off. M-TURBO function reinforces the
bass and creates a more powerful
sound.
M m/M, NX,
./>
Backward/forward, play/pause, skip
operation.
TUNING +/–
Scans a station.
FM MODE
Selects the FM reception mode
(monaural or stereo).
PRESET +/–
Selects preset stations or channels.
N TV CH +/–
(South Africa and Argentina models
only)
Scans for the preset TV channels.
FOLDER +/–
(Other models)
Selects a folder of the USB device.
O TV VOL +/–
Adjusts the TV volume.
P DIMMER
(South Africa and Argentina models
only)
Adjusts the brightness of the display
panel (page 48).
SHUFFLE
(Other models)
Plays track from USB in shuffle mode
(page 29).
Tip
,
V/v/B/b
12
GB
Q REPEAT
Plays a track or a folder repeatedly of
the USB device (page 29).
R VOL +/–
Adjusts the volume level of all
speakers at the same time.
S MUTING
Turns off the sound temporarily.
Press the button again to restore the
sound.
T RETURN
Returns to the previous menu.
U AMP MENU
Displays the menu to operate the
receiver.
V SPEAKER SETTINGS ALL FRONT,
SPEAKER SETTINGS STANDARD
Selects speaker settings according to
speaker layout (page 15, 16).
You can also use SPEAKER SETTINGS on
the receiver.
W TV INPUT
Selects the input signal (TV input or
video input).
X TV MUTING
Activates the TV’s muting function.
• The NX and VOL + buttons have tactile dots.
Use the tactile dots as references when
operating the receiver.
• The above explanation is intended to serve as
examples.
• Depending on the model of your connected
equipment, some functions explained in this
section may not work with the supplied remote
control.
Tip
Notes
13
GB
Getting started
You can enjoy your audio/video equipment connected to the receiver by following the
simple steps below.
Before connecting cords, be sure to disconnect the AC power cord (mains lead).
Installing and connecting the speakers (page 15, 17)
Connecting the TV (page 18)
Connecting other equipment (page 19)
Preparing the receiver
See “Setting the voltage selector” (page 24), “Connecting the AC power cord (mains lead)” (page 24)
and “Turning on the receiver” (page 24).
Setting the speakers
Select the speaker layout settings (page 12), then check the speaker connection using “TEST TONE”
in LEVEL menu (page 25). If the sound is not output correctly, check the speaker connection.
Setting the audio output settings on the connected equipment
To output multi channel digital audio, check the digital audio output setting on the connected
equipment.
For a Sony Blu-ray Disc player, check that “Audio (HDMI)”, “Dolby Digital”, and “DTS” are set to
“Auto”, “Dolby Digital” and “DTS” respectively (as of September 2011).
For a PlayStation 3, check that “BD/DVD Audio Output Format (HDMI)” and “BD Audio Output
Format (Optical Digital)” are set to “Bitstream” (with system software version 3.70).
For details, refer to the operating instructions supplied with the connected equipment.
14
GB
Digital audio formats that this receiver can decode depend on digital audio output jacks of
the equipment connected. This receiver supports the following audio formats.
* Audio signals are output in another format if the playback equipment does not correspond to the
format. For details, refer to the operating instructions of the playback equipment.
Digital audio formats supported by the receiver
Audio format
[Display]
Maximum number
of channels
Connection between the playback
equipment and the receiver
COAXIAL/OPTICAL HDMI
Dolby Digital
[DOLBY D]
5.1 aa
DTS
[DTS]
5.1 aa
DTS 96/24
[DTS 96/24]
5.1 aa
Multi Channel Linear PCM*
[PCM]
7.1 × a
Linear PCM 2.0 aa
15
GB
Connections
1: Installing the speakers
HT-M77
This receiver allows you to use a 7 channel
speaker with 2 subwoofer system.
HT-M55
This receiver allows you to use a 5 channel
speaker with 2 subwoofer system.
HT-M22
This receiver allows you to use a 5 channel
speaker with 1 subwoofer system.
You can enjoy different sound effects from
the system by placing the speakers as
shown below.
A Front speaker (left)
B Front speaker (right)
C Center speaker
D Surround speaker (left)
E Surround speaker (right)
F Surround back speaker (left)
G Surround back speaker (right)
H Subwoofer
Installing all the speakers in
front position (Speaker
layout: All Front)
– HT-M77
– HT-M55
– HT-M22
Connections
Example of speaker
system configuration
16
GB
Installing the surround/
surround back speakers in
rear position (Speaker
layout: Standard)
* HT-M77 only.
** HT-M77/HT-M55 only.
• Do not install the speakers on a wall.
• We recommend that you place the surround
back speakers (HT-M77 only), surround
speakers (HT-M55 and HT-M22 only), and
front speakers (HT-M22 only) on a speaker
stand (not supplied).
• Be sure to select the speaker layout setting
(page 12) according to your speakers
placement.
• Do not lean or hang on a speaker, as it may fall
down.
• For details about installing the speakers, please
refer to the supplied Quick Setup Guide.
• In order to output more effective sound when
“All Front” setting is selected, we recommend
you to install your front speakers and surround
speakers closer to each other.
• All the angles A should be the same.
HT-M77 only
HT-M55/HT-M22 only
• Since the subwoofer does not emit highly
directional signals, you can place it wherever
you want.
We recommend that you place the subwoofer on
the floor for better bass performance.
Attach the supplied foot pads to the bottom
of the speakers and subwoofers to prevent
vibration or movement.
Notes
Tips
Installing the speakers
on a flat surface
Speaker Foot pads
Front (HT-M22 only) Big
Center Small
Surround (HT-M55 and
HT-M22 only)
Small
Surround back (HT-M77 only) Small
Subwoofer Big
17
GB
Connections
2: Connecting the speakers
Before connecting cords, be sure to disconnect the AC power cord (mains lead).
When connecting the speaker cords, match the color of the connector to the color label
under the SPEAKERS jacks of the receiver. Be sure to insert the speaker connector until it
clicks.
* HT-M77 only.
** HT-M77 and HT-M55 only.
• Check the speaker type by referring to the
speaker label on the rear panel of the speakers.
• The center speaker and subwoofers do not have
any character on the speaker label. For details
on the speaker type, see page 62.
Green
(Center
speaker)
Tan*
(Surround back
right speaker
(SBR))
Brown*
(Surround back
left speaker
(SBL))
Gray
(Surround
right speaker
(SR))
Blue
(Surround
left speaker
(SL))
Red
(Front right
speaker (R))
White
(Front left
speaker (L))
Purple
(Subwoofer)
Purple**
(Subwoofer)
Color label
Connector
Notes
18
GB
3: Connecting the TV
Before connecting cords, be sure to disconnect the AC power cord (mains lead).
A HDMI cable (not supplied)
Sony recommends that you use an
HDMI-authorized cable or Sony High
Speed HDMI cable with Cable Type
Logo.
B Optical digital cord (not supplied)
C Audio cord (not supplied)
TV
A*
Audio/Video
signals
Audio signals
B** C**
or
Recommended connection
Alternative connection
19
GB
Connections
To enjoy the TV broadcast
in multi channel surround
sound from the receiver
* If your TV is compatible with the Audio
Return Channel (ARC) function, connect A.
Be sure to set the “CTRL HDMI” to “CTRL
ON” in HDMI settings menu (page 47).
** If your TV is not compatible with the ARC
function, connect B or C.
Be sure to turn off the TV’s volume or
activate the TV’s muting function.
• Connect a TV monitor or a projector to the
HDMI TV OUT jack on the receiver.
• Depending on the status of the connection
between the TV and the antenna (aerial), the
image on the TV screen may be distorted. If this
is the case, place the antenna (aerial) farther
away from the receiver.
When connecting optical digital cords, insert the
plugs straight until they click into place.
• Do not bend or tie optical digital cords.
• All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
• When you connect the audio output jack of the
TV to the TV IN jacks of the receiver to output
the TV sound from the speakers connected to
the receiver, set the sound output jack of the TV
to “Fixed” if it can be switched between either
“Fixed” or “Variable”.
To listen to the sound from
the TV
If your TV does not support System Audio
Control function, set the “AUDIO OUT” to
“TV+AMP” in the HDMI settings menu
(page 47).
4: Connecting other
equipment
High-Definition Multimedia Interface
(HDMI) is an interface which transmits
video and audio signals in digital format.
By connecting Sony “BRAVIA” Sync-
compatible equipment using HDMI cables,
operations can be simplified. See
““BRAVIA” Sync Features” (page 39).
HDMI features
A digital audio signals transmitted by
HDMI can be output from the speakers
connected to the receiver. This signal
supports Dolby Digital, DTS, and Linear
PCM. For details, see “Digital audio
formats supported by the receiver”
(page 14).
The receiver can receive Multi Channel
Linear PCM (up to 8 channels) with a
sampling frequency of 192 kHz or less
with an HDMI connection.
This receiver supports Deep Color (Deep
Colour), “x.v.Color (x.v.Colour)”, and
4K or 3D transmission.
To enjoy 3D images, connect 3D-
compatible TV and video equipment
(Blu-ray Disc player, Blu-ray Disc
recorder, PlayStation 3, etc.) to the
receiver using High Speed HDMI cables,
put on 3D glasses, and then play back a
3D-compatible content.
To enjoy 4K (HDMI IN 1, IN 2, and IN 3
input) images, connect 4K-compatible
TV and video equipment (Blu-ray Disc
player, Blu-ray Disc recorder, etc.) to the
receiver using High Speed HDMI cables,
and then play back a 4K-compatible
content.
Notes
Tips
Using HDMI connection
20
GB
Notes on HDMI connections
DSD signals of Super Audio CD are not
input or output.
Depending on the TV or the video
equipment, 4K or 3D images may not be
displayed.
Refer to the operating instructions of each
connected equipment for details.
Before connecting cords, be sure to
disconnect the AC power cord (mains
lead).
It is not necessary to connect all the cords.
Connect according to the availability of
jacks on the connected equipment.
Use a High Speed HDMI cable. If you use
a Standard HDMI cable, 1080p, Deep
Color (Deep Colour), 4K or 3D images
may not be displayed properly.
We do not recommend using an HDMI-
DVI conversion cable. When you connect
an HDMI-DVI conversion cable to a
DVI-D equipment, the sound and/or the
image may be lost.
When connecting optical digital cords,
insert the plugs straight until they click
into place.
Do not bend or tie optical digital cords.
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
When connecting cords
Tip
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

Sony HT-M77 User manual

Category
Audio tuners
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI