Altec Lansing ABT385 User guide

POWER DUO TOWER SPEAKER

SET (ABT385)

TROUBLESHOOTING GUIDE

SPEAKER SET UP

To connect the satellite speaker to the main speaker:

1. The cable attached to your satellite speaker has TWO plugs.

The RCA plug connects to the OUTPUT port and the AUX cable

connects to the LIGHT port on the main speaker.

2. Plug in the connected POWER cable on the satellite speaker to

an available outlet in your home.

3. Press the power button on the included remote to turn the speakers

on. You will hear two (2) quick beeps indicating the speakers are on.

BLUETOOTH PAIRING

To connect your smartphone device to the speakers

via Bluetooth:

1. Make sure the satellite speaker and main speaker are

connectedtogether and the speakers are plugged into a

power source.

2. Press the BT button on your remote control to enter

Bluetooth mode.

3. Go to the settings on your smartphone/device.

4. Select Bluetooth Manager and choose ABT385.

Once connected, you will hear one (1) beep. This indicates

your smartphone/device is paired.

5. Adjust the volume by pressing the + or - buttons on the

main speaker or the remote control. To change the music

track press the (forward) and (backward) buttons on

remote control.

6. To change the color of the lights, press the LIGHTS button

on the remote control.

7. To change the bass and/or treble levels, press the TONE

button on the speaker and then select the + to increase or

the - to decrease.