Unimig U51009 User guide

  • Hello! I've reviewed the user guide for the UNIMIG Wireless Foot Control U51009 and its connection to the Razor Multi 230 AC/DC welding machine. This document details the steps for pairing the devices using the control panel settings. I'm ready to answer your questions about the connection process or any other related aspect of the described device.
  • How do I turn on the foot control?
    How do I start the pairing process?
    How to complete the pairing process?
    What should I do if I have difficulty connecting the foot control?
SETTINGS
WIRELESS FOOT CONTROL
CONNECTION GUIDE
FOR USE ON UNIMIG RAZOR MULTI 230 AC/DC ONLY
Start this process by ensuring both your machine and the foot control are powered on.
You will find the power switch on the bottom of the foot control next to the battery tray.
MAIN CONTROL KNOB RIGHT PHYSICAL BUTTON
SETTINGS MENU
1. Turn the main control knob from the home screen until you see the settings menu, then press the
control knob to enter into the settings menu.
3. Turn the main control knob to select the option for WIRELESS FOOT CONTROL.
Press the knob twice to begin the pairing process.
2. Press the right physical button while in the General settings menu to enter into the Machine
settings sub menu.
4. Press the foot control down to complete the pairing process.
5. Success “Foot Control Connected” will appear on the screen. The foot control is now ready for use.
***ENSURE remote mode is turned o while using wireless foot control. This setting is in the menu below WIRELESS FOOT CONTROL.
To disconnect, repeat step 3. Do not forget to turn the foot control o. If you are having diculty
connecting the foot control, please ensure the batteries have sucient charge for usage and try again.
If this does not fix the connection problem, power cycle both the foot control and the machine and
attempt again. If you are still not able to connect the foot control, please contact UNIMIG service.
RAZOR MULTI 230 AC/DC CONTROL PANEL
SKU: U51009
(SKU: U11004K)
/