Livoo DOS187 User manual

Brand: Livoo

Model: DOS187

Category: Hair trimmers & clippers

Type: User manual

This manual is also suitable for

DOS187 Multifunction Trimmer Set

Livoo DOS187 is a multifunction trimmer set that offers a variety of grooming options for both hair and beard. With five interchangeable heads, including a hoof trimmer, grid shaver, nose and ear tip trimmer, precision trimmer, and body trimmer, this device allows for precise and versatile grooming. The adjustable comb attachments provide multiple cutting lengths for customized styling, and the lubricating oil ensures smooth operation and blade sharpness. The device is rechargeable and provides up to 90 minutes of cordless operation, making it convenient for use at home or on the go.

User manual

WWW.LIVOO.FR

Reference : DOS187

Version : 1.6

Language : English

Multifunction trimmer set

User manual

You have purchased a product LIVOO brand and we thank you. We take great care in design, ergonomics

and ease of use of our products. We hope that this product will give you complete satisfaction.

This instruction manual is available too on our website www.livoo.fr

General Instructions

PLEASE, TAKE TIME TO READ WELL THE INSTRUCTIONS FOR USE PARTICULARLY BEFORE THE FIRST USE.

A misuse of the appliance can damage it or hurt the user. Assure that you use the appliance for the use

for which it is designed; we refuse any responsibilities as for the damages by an incorrect use or a bad

manipulation.

WARNING

To reduce the risk of electric shock:

1. Do not use this appliance nearby water!

WARNING: Do not use this appliance near bathtubs,

showers, basins or other vessels containing

water.

2. Do not immerse the product in water.

3. Always unplug the USB cable from the unit

immediately after use unless it is being charged.

4. Unplug the unit before cleaning it.

WARNING

To reduce the risk of burns, fire, electric shock or

injury to persons:

5. This appliance is for household use only.

6. Close supervision is necessary when this

appliance is used by, on, or near children or

invalids.

User manual

7. Please read the instruction carefully before using

8. Do not disassemble or refit the product.

9. If the product or any part is damaged, do not re-

use.

10. Do not use the product near wound,

inflammatory or allergic areas.

11. Keep this product out of reach of children.

12. Hair clipper can be used by children aged from

3 years under supervision.

13. This appliance can be used by children aged

from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and understand the

hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall

not be made by children without supervision

14. This product is not a toy.

15. WARNING: For the purposes of charging, only use

the detachable USB cable provided.

16. Switch the appliance off and unplug it after each

use and before cleaning.

User manual

17. Never leave the appliance unsupervised,

particularly if children are around.

WARNING

18. Keep the appliance dry.

19. Not suitable for cleaning under an open

water tap.

20. This appliance contains batteries that are non-

replaceable.

21. This appliance must only be supplied at safety

extra low voltage corresponding to the marking on

the appliance.

22. This appliance is intended to be used in

household and similar applications such as:

• Staff kitchen areas in shops, offices and other

working environments

• Farm houses

• By clients in hotels, motels and other

residential type environnements

• Bed and breakfast type environments

TECHNICAL INFORMATIONS

Input USB : 5.0V , 1.0A

Charging time : 2 hours

User manual

Wireless operating time: 90 minutes

CLEANING AND MAINTENANCE

Clean your beard trimmer regularly.

A regular care of your rechargeable beard trimmer

and its accessories will extend the life of your

equipment.

AFTER EACH USE:

• Ensure that the beard trimmer is switched off.

• Clean the product using cloth which is slightly

dampened in water.

• Do not use abrasive cleansers on the equipment,

on the comb or its blade.

• Never use hair dryer or a heater to dry the product.

• Do not submerge the beard trimmer in the water.

Brush cleaning:

• The trimming comb can be removed from the

main body (trimmer) and cleaned using cleaning

brush available in the box.

• Brush off carefully and blow if necessary in order to

remove the remaining beard hair on the blade.

User manual

• Do not use wire or abrasive brush so as not to

damage the beard trimmer.

Caution on lubrication:

• Apply only light oil similar to the one supplied in

this kit.

• Lubricating is must in the space between

stationary and moving blades with 1-2 drops of oil

which keep blades sharpness and also enhance

operating time.

Comb washing :

• Remove the comb.

• Rinse it under clean running water.

• Allow it to dry completely.

User manual

DESCRIPTION

USE

Charging your hair clipper:

Do not recharge the unit in temperatures lower than 0’C or more than 40’C ambient

- Before using your multifunction trimmer, ensure the product is switched off.

- Connect the USB cable.

Brush

5 interchangeable

heads:

•Hoof trimmer

•Grid shaver

•Nose and ear tip

•Precision

trimmer

•Body trimmer

Lubricating oil bottle

5 Trimmer combs :

•3 mm

•3-6 mm

•6 mm

•9 mm

•12 mm

On/off switch

USB cable

User manual

- 2 hours for a complete charge.

Adjusting the trim length:

The hair guide comb can give you four different cutting lengths, namely 3mm, 6mm, 9mm and 12mm.

The guide combs have 4 position levels, 3mm, 4mm, 5mm and 6mm.

To Attach a Comb:

- Hold the comb with its teeth upward

- Guide the comb rails into the slots on the front of the clipper head. Then push the rear side of comb.

To Remove the Comb:

- Holding the clipper with the blades facing away from you, firmly tick the comb

upward.

Instruction for hair cutting:

STEP 1 – Nape of the neck

- Set the comb to 3mm or 6mm.

- Hold the clipper with the blade teeth pointing upwards. Begin starting at the center of the head at the

base of the neck.

- Slowly lift the clipper, working upwards and outwards through the hair, trimming just a little at a time.

STEP 2 – Back of the head

- With the comb set at 12mm or 18mm, cut the hair at the back of the head.

STEP 3 – Side of the head

- Set the comb to 3mm or 6mm, trim sideburns. Then change the setting to 9mm and continue to cut

the top of the head.

STEP 4 – Top of the head

- Use the hair comb attachment and set it to 24mm or 27mm then cut hair on top of the head against

the direction in which the hair normally grows.

- Always work from the back of the head.

STEP 5 – The finishing touches

- Use the clipper without an attachment comb for close trimming around the base and

sides of the neck.

- To produce a clean straight line at the sideburns, reverse the hair clipper. Place the reversed clipper

at right angles to the head, tips of the blades lightly touching the skin and then work downwards.

Instructions for beard trimming

For even cutting, allow the comb attachment/blade to cut its way through the beard hair. Do not force it

through quickly.

If you are cutting for the first time, start with the maximum comb length attachment.

User manual

To thin and taper the beard

- Turn the unit on.

- Select the desired length setting on the adjustable comb.

- Place the flat top of the trimmer comb against the skin.

- Slowly slide the through the hair. Repeat from different directions as necessary.

The next procedure must be observed for removing the battery.

The hair clipper battery must be removed before discarding the equipment.

Ensure that your hair clipper is disconnected so as to reduce any risk of electrical shock. Discharge the battery fully.

Remove the protection cover situated in a location where you connect the mains voltage adapter and it is removed

so as to access the battery compartment. Carry a screwdriver to remove the screw.

Remove the batteries from the equipment. Cut the cables and tab connecting the batteries in the printed circuit and

remove them.

ATTENTION: THESE LI-ION CELLS MUST BE RECYCLED OR ELIMINATED IN ACCORDANCE WITH THE EQUIPMENT

SCRAPPING.

Do not burn, dismantle, crush or break out the batteries because they can release toxic substances.

Do not expose them to extreme temperatures.

Drop them in the battery recycling bins designed for this purpose or return them to your retailer.

Correct Disposal of this product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate

collection systems)

The European Directive 2012/19/EU on Waste Facilities Electrical and Electronic (WEEE)

This marking shown on the product or its literature, indicates that it should not be disposed

with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please

separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of

material resources.

Household users should contact either the retailer where they purchased this product or their local

authority office, for details of where and how they can take this item for environmentally safe recycling.

LIVOO

BP 61071

67452 Mundolsheim

Livoo DOS187 User manual

Brand: Livoo

Model: DOS187

Category: Hair trimmers & clippers

Type: User manual

This manual is also suitable for

DOS187 Multifunction Trimmer Set

Download PDF

report

Livoo DOS187 User manual

This manual is also suitable for

Livoo DOS187 User manual

Related papers

Other documents