2. Quazite
  3. Enclosure

Quazite Enclosure Installation guide

  • Hello! I have reviewed the user manual for Quazite enclosures. This document outlines the installation process, including excavation, proper placement, filling, and adjustments for various landscapes. I'm here to answer any questions you might have about installing your enclosure.
  • How deep should the excavation be?
    What material should be added for drainage?
    What should be done if the grade level raises later?
TECH INFO
Page 194 | April 2015
Installation:
Guidelines for installing your Quazite® enclosure vary depending on size, location, and environmental fac-
tors. Quazite® enclosures are designed for non-deliberate traffic areas only.
Excavation
Excavate approximately 6 inches deeper than the depth
of the enclosure. Add 6 inches of gravel or crushed rock
for drainage.
1
Placement
Carefully lower enclosure into the hole until the top is at
grade level.
2
Filling
Fill and compact the soil to grade level with the cover on
the enclosure.
3
Adjustment
If the grade level is raised later, a straight-sided enclosure
can be pulled up and bricks added at the bottom on one
or four sides to conform to the landscape.
4
Small Enclosure Installation
/