Gigabyte MUQ77EI User manual

Brand: Gigabyte

Model: MUQ77EI

Category: Motherboards

Type: User manual

MUQ77EI

Intel® Socket uPGA988 processor motherboard

User's Manual

Rev. 1001

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:

 For detailed product information, carefully read the User's Manual.

For product-related information, check on our website at:

http://www.gigabyte.com

- 3 -

Table of Contents

Box Contents ...................................................................................................................4

MUQ77EI Motherboard Layout ........................................................................................5

Chapter 1 Hardware Installation .....................................................................................7

1-1 Installation Precautions .................................................................................... 7

1-2 ProductSpecications ...................................................................................... 8

1-3 Installing the CPU .......................................................................................... 10

1-4 Installing the Memory ..................................................................................... 11

1-4-1 Installing a Memory ...............................................................................................11

1-5 Back Panel Connectors .................................................................................. 12

1-6 Internal Connectors ........................................................................................ 14

Chapter 2 BIOS Setup ..................................................................................................26

2-1 The Main Menu .............................................................................................. 28

2-2 Advanced Menu ............................................................................................. 30

2-2-1 ACPI Settings .........................................................................................................31

2-2-2 Trusted Computing (Optional) ................................................................................32

2-2-3 CPUConguration ..................................................................................................33

2-2-4 SATAConguration.................................................................................................34

2-2-5 Intel (R) Rapid Start Technology ....................................................................... ......35

2-2-6 IntelTXT(LT)Conguration ....................................................................................36

2-2-7 NCT6106DSuperI/OConguration ......................................................................37

2-2-8 NCT6106D HW Monitor ..........................................................................................41

2-2-9 GPIO Control ..........................................................................................................42

2-2-10 Network Stack ........................................................................................................43

2-2-11 CPUPPMConguration .........................................................................................44

2-2-12 Intel (R) 82579LM Gigabit Network Connection .....................................................45

2-3 Chipset Menu ................................................................................................. 47

2-4 Boot Menu ...................................................................................................... 48

2-4-1 CSM Parameters ...................................................................................................49

2-5 Security Menu ................................................................................................ 51

2-5-1 Image Execution Policy .........................................................................................53

2-5-2 Key Management .................................................................................................54

2-6 Exit Menu ....................................................................................................... 56

Chapter 3 Appendix ......................................................................................................58

3-1 Regulatory Statements ................................................................................... 58

- 4 -

Box Contents

MUQ77EI motherboard

Driver CD

Two SATA cables

I/O Shield

• The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

• The motherboard image is for reference only.

- 5 -

MUQ77EI Motherboard Layout

1 2 3 4 5 6

1920

321

910

- 6 -

Item Code Description

1 AUDIO Audio connectors

2 USB_LAN2 RJ45 LAN port (top) / USB 2.0 ports

(buttom)

3 USB_LAN1 RJ45 LAN port (top) / USB 2.0 ports

(buttom)

4 USB3 USB 3.0 ports

5 COMC_D Serial ports

6 DP+/VGA/HDMI VGA port (top)/DisplayPort connector

(right)/HDMI port (left)

7 JRS4 RS422 Select jumper

8 JRS5 RS422 Select jumper

9 JRS2 RS485 Select jumper

10 JRS3 RS485 Select jumper

11 JRS1 RS232 Select jumper

12 DISPLAY_BRT Flat Panel Display connector

13 ATX_12V 4 pin power connector

14 RPGA_988 Intel rPGA 988 socket

15 CPU_FAN CPU fan connector

16 SYS_FAN System fan connector

17 SO_DIMM1 DDR3 SO-DIMM slot

18 SO_DIMM2 DDR3 SO-DIMM slot

19 SATAIII_0/SATAIII_1 SATA 6Gb/s connectors

20 SATAII_1/SATAII_0 SATA 3Gb/s connectors

21 ATX 24 pin power connector

22 F_PANEL Front panel header

23 COM4/COM3 Serial port cable connectors

COM4 (left)/COM3 (right)

24 JCOM1 COM1 Power Select jumper

25 COM1/COM2 Serial port cable connectors

COM1 (left)/COM2 (right)

26 LVDS_EN LVDS enable jumper

27 CLR_CMOS Clear CMOS jumper

28 BATTERY Battery power cable connector

29 GPIO GPIO header

30 F_USB2_2 Front USB header #2

31 F_USB2_1 Front USB header #1

32 F_AUDIO Audio cable connector

33 PCIE4X PCI Express x4 slot

34 MPCIE1X Mini PCi Express connector

35 LVDS LVDS connector

- 7 - Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can

become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read

the user's manual and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

Chapter 1 Hardware Installation

Hardware Installation - 8 -

1-2 ProductSpecications

CPU Supports Intel® Gen 2/3 Mobile Core i7/i5/i3 processor in Socket uPGA988

TDP 35W

Chipset Intel® BD82QM77 Platform Controller Hub (QM77)

Memory 2 x SO-DIMM slots support DDR3 1333/1600MHz

Support up 16GB

Audio Realtek® ALC887 codec

HighDenitionAudio

2 channel

LAN 1 x Intel® 82579LM controller supports AMT8.0

1 x Realtek® RTL 8111E supports 10/100/1000 Mbps

Expansion Slots  1 x mini PCI Express x1 slot

Onboard

Graphics

Build in Intel® Intel® BD82QM77 Platform Controller Hub (QM77)

Storage Interface 2 x SATA 6Gb/s connectors

2 x SATA 3Gb/s connectors

USB Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected

to the internal USB headers)

2 x USB 3.0 ports (back panel)

Internal

Connectors

1 x 4 pin ATX 12V power connector

1 x 24 pin ATX main power connector

2 x SATA 6Gb/s connectors

2 x SATA 3Gb/s connectors

1 x CPU fan header

1 x System fan header

4 x COM power select connectors

1 x Front panel header

1 x Audio header

2 x USB 2.0 headers

1 x 10bit GPIO header

1 x LVDS connector

1 x Display connector

1 x Battery power cable connector

Back Panel

Connectors

1 x HDMI port

1 x DP port

1 x VGA port

2 x COM ports

2 x USB 3.0 ports

4 x USB 2.0 ports

2 x RJ-45 port

3 x Audio connectors

I/O Controller iTE IT6512FN chip

- 9 - Hardware Installation

Form Factor Mini ITX Form Factor; 6.75 inch x 6.75 inch

*GIGABYTE reservesthe right to make any changesto the product specications and product-related information

without prior notice.

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan speed control

* Whether the CPU/system fan speed control function is supported will depend on

the CPU/system cooler you install.

BIOS AMI BIOS

Hardware Installation - 10 -

1-3 Installing the CPU

Read the following guidelines before you begin to install the CPU:

• Make sure that the motherboard supports the CPU.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the CPU to prevent hardware damage.

• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

• Apply an even and thin layer of thermal grease on the surface of the CPU.

• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and

damage of the CPU may occur.

• SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specifications, please do so according to your hardware specifications including the CPU,

graphics card, memory, hard drive, etc.

Installation Steps:

1. The processor socket incorporate a security screw to prevent accidental processor release. Before

installing, please disengage the lock.

2. InserttheCPUwiththecorrectorientation.TheCPUonlytsinoneorientation.

3. Turn the security screw clock-wise toward the Lock symbol to engage the lock.

- 11 - Hardware Installation

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

• Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

• Always turn off the computer and unplug the power cord from the power outlet before installing

the memory to prevent hardware damage.

• Memory modules have a foolproof design. A memory module can be installed in only one

direction. If you are unable to insert the memory, switch the direction.

1-4-1 Installing a Memory

Installation Step:

Step 1. Align the memory with the SO-DIMM module and insert the SO-DIMM memory module into the

SO-DIMM slot.

Please note that memory module has a foolproof insertion design. A memory module can be

installed In only one direction.

Step2. Pushthememoryandseatitrmly.

Step 3. Reverse the installation steps when you wish to remove the SO-DIMM module.

Hardware Installation - 12 -

1-5 Back Panel Connectors

Video Port

The video in port allows connect to video in, which can also apply to video loop thru function.

HDMI Port

TheHDMI(High-DenitionMultimediaInterface)providesanall-digitalaudio/videointerfaceto

transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI

audio/video device to this port. The HDMI Technology can support a maximum resolution of

1920x1200 pixel but the actual resolutions supported depend on the monitor being used.

DP (DisplayPort) Connector

DisplayPort is a digital display interface which is primarily used to connect a video source to a display

device such as a computer monitor, though it can also be used to transmit audio, USB, and other forms

of data.

Serial Port

Connects to serial-based mouse or data processing devices.

USB 3.0 Port

The USB port supports the USB 3.0 specification. Use this port for USB devices such as a USB

keyboard/mouse,USBprinter,USBashdriveandetc.

USB 2.0 Port

The USB port supports the USB 2.0 specification. Use this port for USB devices such as a USB

keyboard/mouse,USBprinter,USBashdriveandetc.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Line In Jack (Blue)

The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out Jack (Green)

The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be

usedtoconnectfrontspeakersina4/5.1/7.1-channelaudioconguration.

• When After installing the HDMI device, make sure the default device for sound playback is the

 HDMIdevice.(Theitemnamemaydifferbyoperatingsystem.Refertheguresbelow

for details.), and enter BIOS Setup, then set Onboard VGA output connect to D-SUB/

HDMI under Advanced BIOS Features..

• Please note the HDMI audio output only supports AC3, DTS and 2-channel-LPCM

formats. (AC3 and DTS require the use of an external decoder for decoding.)

- 13 - Hardware Installation

• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

• When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

MIC In (Pink)

The default MIC In jack. Microphone cab be connected to MIC In jack.

Hardware Installation - 14 -

1-6 Internal Connectors

15 16 17

1) ATX1

2) ATX_12V

3) SATAIII_0/SATAIII_1

4) SATAII_1/SATAII_0

5) CPU_FAN

6) SYS_FAN

7) DISPLAY_BRT

8) COM4

9) COM3

10) COM2

11) COM1

12) JCOM1

13) JRS1

14) JRS4

15) JRS5

16) JRS2

17) JRS3

18) F_PANEL

19) GPIO

20) F_USB2_2

21) F_USB2_1

22) F_AUDIO

23) LVDS

24) BATTERY

25) CLR_CMOS

26) JLVDS_EN

Read the following guidelines before connecting external devices:

• First make sure your devices are compliant with the connectors you wish to connect.

• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

• After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

- 15 - Hardware Installation

F_PANEL

F_AUDIO

F_USB

COMB

MODEM

Smart Card Reader

SPDIF

AUX_IN

CD_IN

Secure Gigital /

Memory Stick

Serial ATA

F_USB

F_1394

CPU_FAN

SYS_FAN

PWR_FAN

NB_FAN

Power

WOL

SUR_CEN

IR/CIR

F_PANEL

PWR_LED

CLR_CMOS

BIOS_WP

CLR_CMOS

BIOS_WP

DPVRM

CLR_PWD

FDD

ATX

ATX_12V

IDE

COMB

SPDIF_IO

F1_1394 F2_1394

GAME SMB_CONN F_AUDIO

(NEW)

F1_1394

1/2) ATX/ATX_12V (2x4 12V Power Connector and 2x12 Main Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the

componentsonthemotherboard.Before connecting the power connector,rst make surethepower

supply is turned off and all devices are properly installed. The power connector possesses a foolproof

design. Connect the power supply cable to the power connector in the correct orientation. The 12V

power connector mainly supplies power to the CPU. If the 12V power connector is not connected, the

computer will not start.

To meet expansion requirements, it is recommended that a power supply that can withstand high

power consumption be used (500W or greater). If a power supply is used that does not provide the

required power, the result can lead to an unstable or unbootable system.

PinNo. Denition

1 GND

2 GND

3 +12V

4 +12V

ATX

ATX_12V

F_PANEL

F_AUDIO

F_USB

COMB

MODEM

Smart Card Reader

SPDIF

AUX_IN

CD_IN

Secure Gigital /

Memory Stick

Serial ATA

F_USB

F_1394

CPU_FAN

SYS_FAN

PWR_FAN

NB_FAN

Power

WOL

SUR_CEN

IR/CIR

F_PANEL

PWR_LED

CLR_CMOS

BIOS_WP

CLR_CMOS

BIOS_WP

DPVRM

CLR_PWD

FDD

ATX

ATX_12V

IDE

COMB

SPDIF_IO

F1_1394 F2_1394

GAME SMB_CONN F_AUDIO

(NEW)

F1_1394

PinNo. Denition

13 3.3V

14 -12V

15 GND

16 PS_ON

17 GND

18 GND

19 GND

20 -5V

21 +5V

22 +5V

23 +5V

24 GND

PinNo. Denition

1 3.3V

2 3.3V

3 GND

4 +5V

5 GND

6 +5V

7 GND

8 Power Good

9 5VSB (stand by +5V)

10 +12V

11 +12V

12 3.3V

Hardware Installation - 16 -

PinNo. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

PinNo. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

DEBUG

PORT

G.QBOFM

DEBUG

PORT

G.QBOFM

DEBUG

PORT

G.QBOFM

DEBUG

PORT

G.QBOFM

4) SATAII_1/SATAII_0(SATA 3Gb/s Connectors)

The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1.5 Gb/s

standard. Each SATA connector supports a single SATA device.

3) SATAIII_0/SATAIII_1 (SATA 6Gb/s Connectors)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and

1.5Gb/s standard. Each SATA connector supports a single SATA device.

• ARAID0orRAID1congurationrequiresatleasttwoharddrives.Ifmorethantwoharddrives

arecongured,thetotalnumberofharddrivesmustbeanevennumber.

• ARAID10congurationrequiresfourharddrives.

(Note) WhenaRAIDcongurationisbuiltacrosstheSATA6Gb/schannels,thesystemperformanceof

  theRAIDcongurationmayvarydependsonthedevicesareconnected.

SATAIII_0

SATAII_1

SATAIII_1

SATAII_0

SATAII_1

SATAIII_1

SATAII_0

- 17 - Hardware Installation

5/6) CPU_FAN/SYS_FAN (CPU Fan/System Fan Headers)

The motherboard has one 4-pin CPU fan header (CPU_FAN), one 4-pin (SYS_FAN) system fan

headers. Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure

to connect it in the correct orientation (the black connector wire is the ground wire). The motherboard

supports CPU fan speed control, which requires the use of a CPU fan with fan speed control design. For

optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.

• Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

• Thesefanheadersarenotcongurationjumperblocks.Donotplaceajumpercapontheheaders.

CPU_FAN

DEBUG

PORT

G.QBOFM

SYS_FAN

PinNo. Denition

1 GND

2 +12V

3 Sense

4 Speed Control

PinNo. Denition

1 VCC_BKL

2 VCC_BKL

3 GND

4 L_BKLTCL_INV

5 L_BKLTEN_INV

7) DISPLAY_BRT (Display Brightness Connector)

Hardware Installation - 18 -

8/9/10/11) COM4/COM3/COM2/COM1 (Serial Port Headers)

The COM header can provide one serial port via an optional COM port cable. For purchasing the

optional COM port cable, please contact the local dealer.

PinNo. Denition

1 NDCDA-

2 NDSRA-

3 NSINA

4 NRTSA-

5 NSOUTA

6 NCTSA-

7 NDTRA-

8 RIA/+5V/+12V

9 GND

10 NC

PinNo. Denition

1 NDCDB-

2 NDSRB-

3 NSINB

4 NRTSBB-

5 NSOUTB

6 NCTSB-

7 NDTRB-

8 NRIB

9 GND

10 NC

PinNo. Denition

1 NDCDE-

2 NDSRE-

3 NSINE

4 NRTSE-

5 NSOUTE

6 NCTSE-

7 NDTRE-

8 NRIE-

9 GND

10 NC

PinNo. Denition

1 NDCDF-

2 NDSRF-

3 NSINF

4 NRTSF-

5 NSOUTF

6 NCTSF-

7 NDTRF-

8 NRIF

9 GND

10 NC

COM4

COM4COM3COM2COM1

COM1

COM3

COM2

12) JCOM1 (5V/12V/RI for Serial Port Option Header)

1-2 Close: 5V (Power COM)

3-4 Close: RI (STAND COM)

5-6 Close: 12V (Power COM)

- 19 - Hardware Installation

13) JRS1 (RS232/RS422/RS485 Select Header)

PinNo. Denition

1 RS232

2 RXD Signal

3 RS422

4 RXD Signal

5 RS485

6 RXD Signal

1-2 Close: RS232 (Default setting)

3-4 Close: RS422

5-6 Close: RS485

14/15/16/17) JRS4/JRS5/JRS2/JRS3 (RS232/RS422/RS485 Mode Select Jumper)

PinNo. Denition

1 RS485 B Signal

2 -NDCDC_D

3 NDCDC

JRS2

PinNo. Denition

1 RS485 A Signal

2 NRXDC_D

3 NRXDC

JRS3

PinNo. Denition

1 RS422 B Signal

2 -NDTRC_D

3 -NDTRC

JRS5

PinNo. Denition

1 RS422 A Signal

2 -NTXDC_D

3 -NTXDC

JRS4

JRS4JRS5JRS2JRS3

1-2 Close: RS485

2-3 Close: RS232 (Default setting)

1-2 Close: RS485

2-3 Close: RS232 (Default setting)

1-2 Close: RS422

2-3 Close: RS232 (Default setting)

1-2 Close: RS422

2-3 Close: RS232 (Default setting)

Hardware Installation - 20 -

18) F_PANEL (Front Panel Header)

Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status

indicator on the chassis to this header according to the pin assignments below. Note the positive and

negative pins before connecting the cables.

The front panel design may differ by chassis. A front panel module mainly consists of power switch,

reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis

front panel module to this header, make sure the wire assignments and the pin assignments are

matched correctly.

PinNo. SignalName Denition

1 HD+ Hard Disk LED Signal anode (+)

2 MPD+ Power LED Signal anode (+)

3 HD- Hard Disk LED Signal cathode(-)

4 MPD- Power LED Signal cathode(-)

5 GND Ground

6 PW+ Power Button anode (+)

7 RESET Reset Button

8 PW- Power Button cathode(-)

9 RSV Reserved

10 NC No Pin

11 UP 3V Power

12 DOWN LAN2 active LED Signal

13 UP1 3V Power

14 DOWN1 LAN1 active LED Signal

Page is loading ...

Gigabyte MUQ77EI User manual

Brand: Gigabyte

Model: MUQ77EI

Category: Motherboards

Type: User manual

Download PDF

report

Gigabyte MUQ77EI User manual

Gigabyte MUQ77EI User manual

Related papers

Other documents