Asus H610I-IM-A Industrial Motherboard User manual

Brand: Asus

Model: H610I-IM-A Industrial Motherboard

Category: Motherboards

Type: User manual

Industrial Motherboard

H610I-IM-A

E21366

First Edition

January 2023

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Chapter 1 Product overview

1.1 Package contents ......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specications ............................................................................... 1-2

Chapter 2 Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Central Processing Unit (CPU) ................................................... 2-4

2.3.1 Installing the CPU ........................................................... 2-5

2.3.2 CPU heatsink and fan assembly installation ................... 2-7

2.4 System memory ........................................................................... 2-9

2.5 Jumpers ...................................................................................... 2-11

2.6 Connectors ................................................................................. 2-14

2.6.1 Rear panel connectors .................................................. 2-14

2.6.2 Internal connectors ....................................................... 2-16

Chapter 3 BIOS setup

3.1 BIOS setup program .................................................................... 3-1

3.1.1 BIOS menu screen .......................................................... 3-2

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-3

3.3.1 LVDS Conguration ........................................................ 3-3

3.3.2 PCH-FW Conguration ................................................... 3-4

3.3.3 Trusted Computing ......................................................... 3-4

3.3.4 CPU Conguration .......................................................... 3-4

3.3.5 Graphics Conguration ................................................... 3-5

3.3.6 Power Management ........................................................ 3-6

3.3.7 PCI Express Conguration .............................................. 3-6

3.3.8 Super IO Conguration ................................................... 3-7

3.3.9 Serial Console Redirection ............................................. 3-8

3.3.10 SATA Conguration ........................................................ 3-9

3.3.11 Network Stack Conguration ........................................ 3-10

3.3.12 USB Conguration ........................................................ 3-10

3.3.13 NVMe Conguration ...................................................... 3-10

3.3.14 Onboard Devices Conguration .................................... 3-10

3.3.15 APM Conguration ........................................................ 3-11

3.3.16 EZ-Flash ....................................................................... 3-12

3.3.17 IO Expander Conguration ........................................... 3-12

3.3.18 Watchdog Timer ............................................................ 3-12

3.4 Hardware Monitor menu ............................................................ 3-12

3.5 Security menu ............................................................................ 3-13

3.6 Boot menu .................................................................................. 3-14

3.7 Exit menu .................................................................................... 3-15

Appendix

Notices .......................................................................................................A-1

Service and Support .................................................................................A-5

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x ASUS H610I-IM-A Industrial Motherboard

1 x SATA 6.0 Gb/s cable

2 x M.2 screw packages

1 x ASUS I/O Shield

NOTE: If any of the above items is damaged or missing, contact your

distributor or sales representative immediately.

1.2 Features

• LGA1700 socket for Intel® 12th Gen. Core™ i9/ i7/ i5/ i3, Pentium®, and

Celeron® Processors

• Two Dual Channel DDR4 3200/2933/2666/2400 MHz Non-ECC SO-DIMMs up

to 64GB

• 3 x SATA 6.0 Gb/s, 4 x USB 3.2 Gen 1, 6 COM ports

• 1 x PCIe 4.0 x16 slot, 1 x M.2 Socket 3 with Key M, type 2242/2260/2280

(SATA/PCIe x4 mode),1 x M.2 Socket 1 with Key E, type 2230 for WIFI/BT

device (PCIe & CNVi)

• Multi-display: 2 x HDMI®, 1 x DisplayPort, 1 x LVDS, 1 x Embedded

DisplayPort (colay with LVDS, optional)

Chapter 1

Product overview

Chapter 1 Product overview

H610I-IM-A

1-2

1.3 Specications

(continued on the next page)

CPU

LGA1700 socket for Intel® 12th Gen. Core™ i9/ i7/ i5/ i3,

Pentium®, and Celeron® Processors

Supports up to 65W

Chipset Intel® H610 Chipset

Memory 2 x SO-DIMM, max.64GB, DDR4 3200/2933/2666/2400 MHz

SDRAM

Graphics

Integrated graphics processor - Intel® HD Graphics support

Multi-output support: HDMI®/DisplayPort/LVDS/eDP ports*

- Supports HDMI® output with a maximum resolution of 4096 x

2160 @ 60Hz

- Supports DisplayPort output with a maximum resolution of

4096 x 2160 @ 60Hz

- Supports LVDS output with a maximum resolution of 1920 x

1200 @ 60Hz

- Supports Embedded DisplayPort output with a maximum

resolution of 4096 x 2160 @ 60Hz (colay with LVDS,

optional)

* The system supports up to three displays simultaneously.

Expansion slots

1 x PCIe 4.0 x16 slot

1 x M.2 Socket 3 with key M, type 2242/2260/2280 (SATA/PCIe

x4 mode)

1 x M.2 Socket 1 with Key E, type 2230 for WIFI/BT device (PCIe

& CNVi)

Storage

3 x SATA Gen 3.0, up to 6.0 Gb/s ports

1 x M.2 Socket 3 with key M, type 2242/2260/2280 (SATA/PCIe

x4 mode)

LAN

2 x LAN (RJ45) ports:

1 x Intel® i219V

1 x Intel® i210AT

Audio Realtek ALC 897 High Denition Audio

Line-Out, Mic in

Rear I/O ports

1 x HDMI® port

1 x DisplayPort

4 x USB 3.2 Gen 1 ports

2 x LAN (RJ45) ports

2 x COM ports (RS232/422/485)

2 x Audio jacks

Internal I/O

connectors

4 x COM headers (RS232)

2 x USB 2.0 header supports 4 additional USB 2.0 ports

1-3

Chapter 1: General information

Internal I/O

connectors

1 x CPU Fan header (PWM mode)

1 x Chassis Fan header (PWM mode)

1 x LVDS/ eDP selection jumper

1 x Chassis Intrusion header

1 x Front Panel Audio header (AAFP)

1 x System Panel header

1 x Clear CMOS header

1 x Speaker header

1 x COM Debug header

1 x GPIO header (8-bit)

1 x AT/ATX mode selection jumper

1 x 24-pin ATX power connector

2 x 4-pin ATX power connectors

1 x SPI TPM header

1 x LCD Panel monitor switch header

Watch dog timer Yes

Power

requirement AT/ATX mode

Operation

Temperature 0~60°C

Non-Operation

Temperature -40~85°C

Relative Humidity 10%~95% (non-coagulation)

OS support

Windows® 10 (64-bit)

Windows® 10 IoT Enterprise

Ubuntu

RedHat Enterprise

Fedora Workstation

OpenSUSE

Certication CE, FCC

Form Factor ATX Form Factor, 12”x 13” (24.4cm x 30.5cm)

NOTE: Specications are subject to change without notice.

H610I-IM-A

1-4

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplug the power cord from the wall socket before touching any

component.

• Before handling components, use a grounded wrist strap or touch a safely

grounded object or a metal object, such as the power supply case, to avoid

damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, always remove the AC power

by unplugging the power cord from the power outlet. Failure to do so may

cause severe damage to the motherboard, peripherals, or components.

Chapter 2 Motherboard information

H610I-IM-A

2-2

17.0cm(6.7in)

EATXPWR

DDR4 SO-DIMM_A1 (64bit, 260-pin module)

DDR4 SO-DIMM_B1 (64bit, 260-pin module)

LGA1700

M.2(SOCKET3)

PCIE SATA

3.0 X4 V

AT_ATX_SEL

BKLTEN_SEL

CHASSIS

F_PANEL

SPEAKER

LCD_BLKT_PANEL

COM3

USB78USB56

COM4 COM5

COM6

SATA6G_3SATA6G_2SATA6G_1

BATTERY

CLRTC

AAFP

COM_DEBUG

AUDIO

Super

I/O

LAN2_U32G1_34

LAN1_U32G1_12

COM1_SEL

COM2_SEL

128Mb

BIOS

HDMI1_DP

HDMI2

LVDS_EDP

Intel®

H610

ALC

897

PCIEX16(G4)

CPU_FAN

CHA_FAN

PANEL_SW

VCC_PWR SEL

GPIO_CON

TPM

M.2(WIFI)

2280 2260 2242

EATX12V

COM2

COM1

Intel®

I219V

Intel®

I210AT

18 17

2021 19

7 9 10 11 1232 6 84 51

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place nine screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION! Do not overtighten the screws! Doing so can damage the

motherboard.

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/Slots Page

1. COM RING/+5V/+12V selection jumper (COM1/2_SEL) 2-12

2. LCD Panel monitor switch header (2-pin PANEL_SW) 2-24

3. LVDS Backlight Panel header (5-pin LCD_BLKT_PANEL) 2-25

4. ATX Power connector (24-pin ATXPWR, 2 x 4-pin EATX12V) 2-16

5. Intel® LGA1700 CPU socket 2-4

6. Chassis Intrusion header (4-1 pin CHASSIS) 2-20

7. AT/ATX mode selection jumper (3-pin AT_ATX_SEL) 2-12

8. COM Port headers (10-1 pin COM3 - COM6) 2-22

9. General Purpose Input/Output header (GPIO_CON) 2-21

10. CPU and Chassis Fan headers (4-pin CPU_FAN, 4-pin CHA_FAN) 2-16

11. Speaker header (4-pin SPEAKER) 2-20

12. System Panel header (10-1 pin F_PANEL) 2-19

13. DDR4 SO-DIMM slots 2-9

14. USB 2.0 headers (10-1 pin USB56, USB78) 2-17

15. M.2 slot (SOCKET 3) 2-18

16. SATA 6.0 Gb/s ports (7-pin SATA6G_1-3) 2-21

17. COM Debug header (5-1 pin COM_DEBUG) 2-24

18. PCIe 4.0 x16 slot 2-26

19. M.2 Wi-Fi slot 2-18

20. RTC Battery header (2-pin BATTERY) 2-22

21. Front Panel Audio header (10-1 pin AAFP) 2-23

22. TPM header (14-1 pin TPM) 2-17

23. Clear RTC RAM (2-pin CLRTC) 2-11

24. LVDS Panel Backlight Enable Signal Selection jumper (BKLTEN_SEL) 2-13

25. LVDS/EDP header (40-pin LVDS_EDP) 2-25

26. LVDS Panel VCC Power Selection jumper (6-pin VCC_PWR_SEL) 2-13

H610I-IM-A

2-4

IMPORTANT: Unplug all power cables before installing the CPU.

CAUTION!

• Ensure that you install the correct CPU designed for LGA1700 socket only.

DO NOT install a CPU designed for other sockets on the LGA1700 socket

• Upon purchase of the motherboard, ensure that the PnP cap is on

the socket and the socket contacts are not bent. Contact your retailer

immediately if the PnP cap is missing, or if you see any damage to the PnP

cap/socket contacts/motherboard components. ASUS will shoulder the cost

of repair only if the damage is shipment/transit-related.

• Keep the cap after installing the motherboard. ASUS will process Return

Merchandise Authorization (RMA) requests only if the motherboard comes

with the cap on the LGA1700 socket.

• The product warranty does not cover damage to the socket contacts

resulting from incorrect CPU installation/removal, or misplacement/loss/

incorrect removal of the PnP cap.

2.3 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1700 socket designed for

the Intel® 12th Gen. Core™ i9 / Core™ i7 / Core™ i5 / Core™ i3, Pentium®, and

Celeron® Processors.

LGA1700

2-5

Chapter 2: Motherboard information

Take caution when lifting the load

lever, ensure to hold onto the load

lever when releasing the load

lever. Letting go of the load lever

immediately after releasing it may

cause the load lever to spring

back and cause damage to your

motherboard.

2.3.1 Installing the CPU

• Ensure that you install the correct CPU designed for LGA1700 socket only.

DO NOT install a CPU designed for LGA1155, LGA1156, LGA1151, and

LGA1200 sockets on the LGA1700 socket.

• ASUS will not cover damages resulting from incorrect CPU installation/

removal, incorrect CPU orientation/placement, or other damages resulting

from negligence by the user.

H610I-IM-A

2-6

2 3

2-7

Chapter 2: Motherboard information

2.3.2 CPU heatsink and fan assembly installation

CAUTION! Apply the Thermal

Interface Material to the CPU

heatsink and CPU before you

install the heatsink and fan if

necessary.

To install the CPU heatsink and fan assembly

H610I-IM-A

2-8

To uninstall the CPU heatsink and fan assembly

LGA1700

4• We recommend using a

LGA1700 compatible cooling

system on an Intel® 600 series

motherboard.

• Push-pin type LGA1200

compatible cooling systems

cannot be installed to this

motherboard.

2-9

Chapter 2: Motherboard information

2.4 System memory

This motherboard comes with two Double Data Rate 4 (DDR4) Dual Inline Memory

Module (DIMM) sockets. The gure below illustrates the location of the DDR4

DIMM sockets:

Channel Sockets

Channel A DIMM_A1

Channel B DIMM_B1

SO-DIMM_A1

SO-DIMM_B1

IMPORTANT!

• You may install varying memory sizes in Channel A and Channel B. The

system maps the total size of the lower-sized channel for the dual-channel

conguration. Any excess memory from the higher-sized channel is then

mapped for single-channel operation.

• Always install the DIMMs with the same CAS Latency. For an optimum

compatibility, we recommend that you install memory modules of the same

version or data code (D/C) from the same vendor. Check with the vendor to

get the correct memory modules.

• According to Intel® CPU spec, DIMM voltage below 1.35V is recommended

to protect the CPU.

NOTE: Visit the ASUS website at www.asus.com for the latest QVL.

H610I-IM-A

2-10

Installing a DIMM

To remove a DIMM

DIMM_B1*

DIMM_A1*

DIMM_B1*

Recommendedmemoryconguration

2-11

Chapter 2: Motherboard information

2.5 Jumpers

1. Clear RTC RAM (2-pin CLRTC)

This header allows you to clear the CMOS RTC RAM data of the system

setup information such as date, time, and system passwords.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Use a metal object such as a screwdriver to short the two pins.

3. Plug the power cord and turn ON the computer.

4. Hold down the <Del> key during the boot process and enter BIOS setup

to re-enter data.

NOTE: If the steps above do not help, remove the onboard battery and move

the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS,

reinstall the battery.

+3V_BAT

GND

CLRTC

PIN 1

Connector type HEADER 1x2p, 2.54mm pitch, S/T

H610I-IM-A

2-12

3. AT/ATX mode selection jumper (3-pin AT_ATX_SEL)

Pins

1-2 (Default) ATX mode

2-3 AT mode

21 2 3

ATX mode

(Default)

AT mode

AT_ATX_SEL

Connector type HEADER 1x3p, 2.54mm pitch, S/T

2. COM Ring/+5V/+12V selection jumper (6-pin COM1/2_SEL)

Setting Pins

+12V 1-2

+5V 3-4

Ring (Default) 5-6

(Default)

+5V+12V

COM1_SEL

12 34 56

COM2_SEL

Page is loading ...

Asus H610I-IM-A Industrial Motherboard User manual

Brand: Asus

Model: H610I-IM-A Industrial Motherboard

Category: Motherboards

Type: User manual

Download PDF

report

Asus H610I-IM-A Industrial Motherboard User manual

Asus H610I-IM-A Industrial Motherboard User manual

Related papers

Other documents