K-array Redline KL18ma User manual

USER'SMANUAL ENGLISH

array

KR200S

K-arrayisthenewvoicethatsingsaloud,"outsidethe

chorus",andwhoseperformanceisbetterthanany

otherproducts.Bornon-the-road,inthe PAworld,

whereyougetnodiscount,youhavetogiveyour

bestasfastasyoucan,oftenwitha"compressed"

budget,K-Arraysystemshavebeendesignedto

givepreciseanswerstopreciseneeds.

Drivenbynewgenerationdigitalengines,with

power/dimension/weightratiosthatareten

timesbetterthananyotherprofessional

products,K-arrayscandeliverthefull

spectrumofmusicalstyleswithclarity,power,

punch,intelligibilityandevennessacross

bothvolumelevelsandthefrequency

spectrum.Thesesystemscanberemotely

controlledandcomewithasophisticated

on-boardsoftware,allowingtheuserto

shapetheirperformancetotasteand

needs.InsideK-arraysystemsyouwill

findsomethingthatonlywecanoffer:

thebestintechnology,proudly

conceived,designedandproducedin

Italy.Iftheywerecars,theywould

beFerrari.Don'tagreeto payfora

simplebrand,claimperformance,

anddon'tbelievethosewho

maintainthattheseproductsare

onlyforfewpeople,theonly

truthisthat K-arraysystems

areunique,butaffordableand

withineverybody'sreach!

HP Sound Equipment

The is a high performance ultra-slim powered

two way system designed for small to medium wavefront

systems, in both mobile and installed applications. The

includes two KR200 satellites and 2 KL18ma

powered subwoofers. features a 1600 watt 18"

drive unit with neodymium magnet structure and suspension

engineered for maximum linear excursion. Its ultra-light reflex

cabinet is fitted with two pocket handles and one 35mm pole

mounting point for easy installation with every satellite speaker on

it. The features a line array of 32x2" high efficiency

neodymium magnet drivers enclosed in an ultra-strong chassis, to

ensure high resistance and durability in the hardest working

conditions. The thanks to true line array technologies and

powerful DSP system, achieve outstanding power and coherence

throughout the intended coverage allowing a wide dynamic range and a

faithful reproduction of sound. All the components are

KR200 S

KL18m a

KR200 S

The

R&D department and custom made under control

quality system.

K-

array K -array

SAFETY INSTRUCTIONS

• Toreducetheriskofelectricshock,disconnecttheloudspeakerfromtheACmains

beforeinstallingaudiocable.Reconnectthepowercordonlyaftermakingallsignal

connections.

•Connecttheloudspeakertoatwo-pole,threewiregroundingmainsreceptacle.The

receptaclemustbeconnectedtoafuseorcircuitbreaker.Connectiontoanyothertypeof

receptacleposesashockhazardandmayviolatelocalelectricalcodes.

•Donotinstalltheloudspeakerinwetorhumidlocationswithoutusingweather

protection.

•Donotallowwateroranyforeignobjecttogetinsidetheloudspeaker.Donotputobjects

containingliquidon,ornear,theunit.

•Toreducetheriskofoverheatingtheloudspeaker,avoidexposingittodirectsunlight.Donot

installtheunitnearheatemittingappliances,suchasaroomheaterorstove.

•Thisloudspeakercontainspotentiallyhazardousvoltages.Donotattempttodisassemblethe

unit.Theunitcontainsnouserserviceableparts.Repairsshouldbeperformedonlybyfactory

trainedservicepersonnel.

REV.01

Amplifierpanel

PRESET

keeppressed

forpresetlock

INPUT

PARALLEL

OUT

INPUT

(balanced)

GROUND

LIFT

ON LIMIT

LINK

(parallel)

POWER

ATTENTION!:

READMANUAL FOR

CORRECT

PRESET SELECTION

1+POSITIVEOUT

1-NEGATIVEOUT

2+N.C.

2-N.C.

REMOTE

DSP

POWER

OUTPUT

ANALOG

POWERSUPPLY

INPUT

PAD

0.5 34

RS485

ADDRESS

MADEINITALY

WARNINGS:

Toensurecorrectoperation,

allowatleast

20cmclearancefrom

backsurfaceandcorrect

ventilation.Toreduceriskof

electricshockdonotremove

cover.Nooperatororserviceable

partsinside.Referservicingto

qualifiedpersonnel.Toreducethe

riskoffireorelectricshockdo

notexposethisapplianceto

rainormoisture.

CAUTION

RISKOFELECTRICAL SHOCK

DONOT OPEN!

DONOT EXPOSE

TORAINORMOISTURE!

ATTENTION

RISQUEDECHOCELECTRIQUE

NEPASENLEVER!

isaproductof

vialeRoma7/i,50037S.PieroaSieve

FirenzeITALY Tel+390558487222

HP SoundEquipmentsrl

ID12

PRESET

PUSH

BalancedXLR

In\Outparallel

RS485connection

forremotecontrol

(don'tconnectto

LANport!)

Groundliftswitch

Inputpadlevel

Preset change button

Keep it pressed 10sec.

to store preset as default

ID number for remote

control

Speakon power output.

To use with KR200

satellite or with KL18

passive subwoofer

PowerCon Input

PowerConparallel

Output

Preset loaded

REV.01

Technicaldata

Acoustics

Powerhandling

Maxpower

Impedance

Operatingfrequencyrange

Frequencyrange

SPL 1W/1mt

MaximumSPL

Crossover

Type

Frequency

Transducers

Lowfrequency

Highfrequency

AudioInput

Connectors

Wiring

AudiopoweredOutput

Connector

Wiring

RemotecontrolInput

Connectors

PowerInput

Connectors

Amplifiers

Type

Subwooferpower

Satellitepoweroutput

Protections

ACpower

Operatingrange

Maxcontinuosandburstcurrent

Physical

Measures

Weight

800(sub)+500(sat)w1

1200(sub)+1200(sat)w

8 (sub)+8 (sat)

30Hz-19KHz+/-3dB(presetrelating)

35Hz-19KHz+/-3dB(presetrelating)

97dB(sub)101dB(sat)

127dBcontinuos-133dBpeak

DSP controlledpresetrelating

150Hzminimum(presetrelating)

1x18"Neodymiumspeakerswith3"voicecoil

32x2"Neodymiumspeakerswith0,75"voicecoil

male+femaleparallel3polesbalancedXLR

=ground/ =hot/ =cold

FemaleSpeakon

=CH1+/ =CH1-/ =N.C./ =N.C.

1xfemale8polesRJ45

2xPowerConIN/OUT

1modulesclassD-DSP controlled

1000Watt

1000Watt

Dynamiclimiter,overcurrent,overtemp,shortcircuits

Standard210 -240Vac50Hz(standard)

Standard6A(>10sec)-12A (<1sec)

46.5x46.5x58.5cm(KL18ma)5.5x7x200cm(KR200)

20Kg(KL18ma)9Kg(KR200)

W W

Pin1 Pin2 Pin3

Pin1+ Pin1- Pin2+ Pin2-

Optional100-120Vac60Hz(optional)

Optional10A(>10sec)-20A (<1sec)

Notesfordata

1. Power handling is measured following AES standard conditions: transducers driven continuously for two hours with a band-limited noise signal having 6 dB of crest factor.

2. Max power is the maximum RMS applicable power for a musical signal, the referement signal is the one proposed by EIAJ standard.

3. Recommended maximum operating frequency range. Response depends on loading conditions and room acoustics.

4. Free field measured with 1/3 octave frequency resolution at 2 mt.

5. Measured@4 mt then scaled@1 mt.

6. Measured with audio source @1 mt.

7. This is the frequency in which the transducers produce the same sound pressure level (measured@2 mt).

8. Amplifier wattage rating is based on the maximum unclipped burst sine wave RMS voltage that the amplifier will produce into the nominal load impedance .