Behringer SX3040 Quick start guide

Type
Quick start guide

Behringer SX3040 Sonic Exciter is a high-quality stereo sound enhancement processor that adds warmth, clarity, and punch to your audio. With its intuitive controls, you can easily adjust the bass processor, sonic exciter, and harmonics to create a custom sound that perfectly suits your needs. The SX3040 is perfect for enhancing vocals, instruments, and overall mixes, and is a great choice for home studios, project studios, and live sound applications.

Behringer SX3040 Sonic Exciter is a high-quality stereo sound enhancement processor that adds warmth, clarity, and punch to your audio. With its intuitive controls, you can easily adjust the bass processor, sonic exciter, and harmonics to create a custom sound that perfectly suits your needs. The SX3040 is perfect for enhancing vocals, instruments, and overall mixes, and is a great choice for home studios, project studios, and live sound applications.

SONIC EXCITER SX3040
Ultimate Stereo Sound Enhancement Processor
V 4.0
2SONIC EXCITER SX3040 イッス タガ イ 3
Terminals marked with this symbol carry
electrical current of sucient magnitude
to constitute risk of electric shock.
Use only high-quality professional speaker cables with
¼" TS or twist-locking plugs pre-installed. Allother
installation or modication should be performed only
by qualiedpersonnel.
This symbol, wherever it appears,
alertsyou to the presence of uninsulated
dangerous voltage inside the
enclosure-voltage that may be sucient to constitute a
risk ofshock.
This symbol, wherever it appears,
alertsyou to important operating and
maintenance instructions in the
accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, donot
remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
qualied personnel.
Caution
To reduce the risk of re or electric shock,
do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects lled with liquids,
suchas vases, shall be placed on the apparatus.
Caution
These service instructions are for use
by qualied service personnel only.
Toreduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by qualied
servicepersonnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. Ifthe
provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Use only attachments/accessories specied by
themanufacturer.
12. Use only with the
cart, stand, tripod, bracket,
or table specied by the
manufacturer, orsold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
beendropped.
15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable.
17. Correct disposal of this
product: This symbol indicates that
this product must not be disposed
of with household waste,
according to the WEEE Directive
(2012/19/EU) and your national
law. This product should be taken
to a collection center licensed for
the recycling of waste electrical and electronic equipment
(EEE). The mishandling of this type of waste could have a
possible negative impact on the environment and human
health due to potentially hazardous substances that are
generally associated with EEE. At the same time, your
cooperation in the correct disposal of this product will
contribute to the ecient use of natural resources.
For more information about where you can take your
waste equipment for recycling, please contact your local
city oce, or your household waste collection service.
18. Do not install in a conned space, such as a book
case or similar unit.
19. Do not place naked ame sources, such as lighted
candles, on the apparatus.
20. Please keep the environmental aspects of battery
disposal in mind. Batteries must be disposed-of at a
battery collection point.
21.
This apparatus may be used in tropical and moderate
climates up to 45°C.
Music Tribe accepts no liability for any loss which may
be suered by any person who relies either wholly or in
part upon any description, photograph, or statement
contained herein. Technical specications, appearances
and other information are subject to change without
notice. All trademarks are the property of their
respective owners. Midas, Klark Teknik, Lab Gruppen,
Lake, Tannoy, Turbosound, TC Electronic, TC Helicon,
Behringer, Bugera, Aston Microphones and Coolaudio
are trademarks or registered trademarks of Music
Tribe Global Brands Ltd. © Music Tribe Global Brands
Ltd. 2023 All rights reserved.
For the applicable warranty terms and conditions
and additional information regarding Music Tribes
Limited Warranty, please see complete details online at
community.musictribe.com/pages/support#warranty.
使だくた
限定保証
法的放棄
4SONIC EXCITER SX3040 イッス タガ イ 5
SONIC EXCITER SX3040ント
ント
(9)
(1) (2) (3) (4) (5) (6) (7) (8)
(10)
(11)
BASS PROCESSOR (低ロセッ)
(1) DRIVE (ドラブ )このント
、低 す 。
最適な処理ポ調整す
強い低信号ーク到達し LED
色に一定に点灯します LED
ほ ど 、低
ークレベルにある間が長く
す (Sustain (維持)。 これに
み と ボリュ の あ る 低 音 を 実
す。
(2) TUNE (チューン)のコント
低音用のオフ周波数を
。調 50 Hz (最小)
~ 145 Hz (最大) で
(3) MIX (ミッス ) このント
で、オリナル号とミックスする
済 み 信 号 の 割 合 を決 めま す。
SONIC EXCITER ( ソッ クエ キ サ イター )
(4) TUNE (ューン)このント
で 、高 カ ッ
周波数を決めます調帯域
1.2 kHz (最小) ~ 10.5 kHz (最大)
す。
(5) HARMONICS (ニクス)このコ
ン ト で 、信
を調整しこのパラ
、デ ィ テ ン ド
の特性直接影響MIN (最小)
調整は声なの小さ信号に、MAX
(最大) 調整は打楽器な特別な処
理 に使 ま す。
(6) MIX (ミッス ) このント
で、オリナル号とミックスする
済 み 音 エ キ サ イタ
決 めま す。
(7) IN/OUT (イン / ウト) 信号理を有
効 (青色 LED) おび無効 (赤色 LED)
にしアクティブティ
グモド (ボを押だ状
態) ではボLEDに点灯し
す。
(8) POWER (電源) – POWER (電源) ス
イッ
電源回路に接続する場合には、
POWER (電源) スチは 「OFF (フ)
の 位 置す。
(9) IEC POWER SOCKETには IEC
使いま
す 。こ
してい ます。 ーブが 付
ています
(10) CH1 OUT左右対称 XLRャック
クター 6.3 mm ャックコネクタ
プ 、そ
、録 音 機 接 続
2必要な場合は、
ーと XLRネクタ使
す。
(11) CH1 IN左右対XLRャックコ
クター 6.3 mmャックネクタ
で 、ラ イ ン
ス (ど) を
、ジ ャ ッ ク ク タ
ーまたは XLR クターちら
を 使す。
6SONIC EXCITER SX3040 イッス タガ イ 7
の重
1. ヒューズの格納部 / 電圧の選択:
ユニットをパワーソケットに接続する前
に、各モデルに対応した正しい主電源を
使用していることを確認してください。
ユニットによっては、230 V120 V
2 つの違うポジションを切り替えて使う、
ヒューズの格納部を備えているものが
あります。正しくない値のヒューズは、
絶対に適切な値のヒューズに交換されて
いる必要がありま す。
2. 故障: Music Tribe ディーラーがお客様
のお近くにないときは、musictribe.com
Support” 内に列記されている、お客様の国
Music Tribe ディストリビューターにコン
タクトすることができます。お 客様の国
がリストにない場合は、同じ musictribe.com
の “Support” 内にある “Online Support” でお客
様の問題が処理できないか、チェックし
てみてください。あるいは、商品を返送
する前に、musictribe.com で、オンラインの
保証請求を要請してください。
3. 電源接続: 電源ソケットに電源コー
ドを接続する前に、本製品に適切な電圧
を使用していることをご確認ください。
不具合が発生したヒューズは必ず電圧お
よび電流、種類が同じヒューズに交換す
る必要があります。
そのの重要
技術仕様
入力
ネクタ 2 x XLR、バ ス 型 2 x 1/4" TRS、バ ラ ン
入 力ピー 22 kΩ衡、11 kΩ 不平
力レ+4 dBu
力レ+22 dBu
CMRR 通常 > 55 dB @ 1 kHz
出力
ネクタ 2 x XLR、バ ス 型 2 x 1/4" TRS 、バ ラ ン
インピー ンス 100 Ω衡、100 Ω 不平衡
力レ+21 dBu
仕 様( プサ ー入 力 、ットット
周波応答 10 Hz~50 kHz±1 dB
信号音比 > -93 dBu22 Hz~22 kHz重み付けな
THD <0.01% @ +4 dBu
ャネスト<100 dB @ 1 kHz
ース
タイプ 移相器を備えた周波数選択プロ
フィル タの カットオ フ
波数 50 Hz – 145 Hz、調 整 可 能
ク エ キサ イタ
タイプ ハーックプセッサ
フィル タの カットオ フ
波数 1.2 kHz – 11 kHz、調 整 可 能
イッ チ モ ード 電 レン100-240 V~50 / 60 Hz
消費電力 15 W
主な接標準 IEC クル
寸法 / 重量
寸法 (H x W x D)44 x 483 x 150 mm (1.7 x 19.0 x 5.9")
重量 3.3 lbs (1.5 kg)
We Hear You
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Behringer SX3040 Quick start guide

Type
Quick start guide

Behringer SX3040 Sonic Exciter is a high-quality stereo sound enhancement processor that adds warmth, clarity, and punch to your audio. With its intuitive controls, you can easily adjust the bass processor, sonic exciter, and harmonics to create a custom sound that perfectly suits your needs. The SX3040 is perfect for enhancing vocals, instruments, and overall mixes, and is a great choice for home studios, project studios, and live sound applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI