2. GW Instek
  3. MFG-2000

GW Instek MFG-2000 User guide

  • Hello! I've reviewed the Firmware Upgrade Guide for the GW INSTEK MFG-2000 Series Multi-Channel Function Generators. The document provides instructions on how to upgrade the firmware for MFG-21XX and MFG-22XX models, including preparation steps, file selection, and checking the current device version. I'm ready to assist with any questions you have about the firmware upgrade process.
  • What file is needed for the upgrade?
    Where to put all the files for update?
    Where to check current device version?
1
Multi-Channel Function
Generator
MFG-2000 Series
FIRMWARE UPGRADE
GUIDE
GW INSTEK PART NO. N/A
ISO-9001 CERTIFIED MANUFACTURER
2
MFG-2000
Ser
i
es
Upgrade
Guide
This guide contains proprietary information, which is protected
by copyright. All rights are reserved. No part of this guide may
be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this guide was correct at the time of
printing. However, Good Will continues to improve products
and reserves the right to change specification, equipment, and
maintenance procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng District, New Taipei City 236, Taiwan.
3
MFG-2000 Series Upgrade
Guide
U
PGRADE
PROCEDURE
This firmware upgrade guide describes how to
upgrade the MFG-2000 series firmware.
1.
Necessary
Preparation Firmware: MFG-2XXX_Upgrade_VX.XX.rar
(2XXX means 21XX Series or 22XX Series；VX.XX
means the coding for version)
Operation i. Unzip the MFG-2XXX_Upgrade_VX.XX.rar，
there might have four files.
21XX Series：
MFG1VXXX.bin,MCFFPGA.bin,HZ12.bin and
WAVEMORE.bin
22XX Series：
MFG2VXXX.bin,MFG4FPGA.bin ,HZ12.bin and
WAVEMORE.bin
PS：We only need to choose the
MFG1VXXX.bin/MFG2VXXX.bin
for update.
ii. Unzip the file to the root directory as below
(e.x.MFG-22XX)
MFG-2000
Ser
i
es
Upgrade
Guide
4
2. Upgrade procedures
Operation a. Press UTIL
b.
Press F3(Cal.)
c. Press F2 (Software)
d.
Unzip the file to the root directory and
press F2(Upgrade)
e. Rotate the knob to the right
file(MFG2V103)
f. Press F1（Select）and upgrade it.
MFG-2000 Series Upgrade
Guide
NOTE Please put all files in the root and just need to
upgrade MFG2VXXX/1VXXX.bin file
Check
version You can look up the version when at step “C”
Version inf. Model name,CPU version, FPGA version, S/N,Software
release date
Updating the firmware is completed.
/