Rock Slide Engineering Front Bumper Skid Plate Installation guide

Brand
Rock Slide Engineering
Model
Front Bumper Skid Plate
Type
Installation guide
INSTALLATION INSTRUCTION RSEI 112
RIGID SERIES SKID PLATE
FB-SP-100-JK
*If any parts listed are missing or damaged please call Rock-Slide Engineering @
435-752-4580 prior to installation.
QTY
DESCRIPTION
1
Skid Plate
3
Screw Nut
3
3/8’’x1’’ Bolt
3
3/8’’ Washer
INSTALLATION INSTRUCTION RSEI 112
NOTE: This skid plate is specifically designed to attach to the Rock-Slide Engineering
RIGID Series JK Bumper.
1. Push the screw nuts onto the three holes on the bottom of the bumper until the
holes line up. The threaded end of the nut screw nut faces upward
2. Place the skid plate with bolt holes against the bumper and so the skid plate is
hanging down. Put washers on the bolts and insert bolts into their respective
holes. Tighten bolts
Thank you for choosing Rock-Slide Engineering products. We value your business
and welcome your feedback/suggestions. If you have any concerns please contact
us directly @ 435-752-4580. We are here to help you!
  • Page 1 1
  • Page 2 2

Rock Slide Engineering Front Bumper Skid Plate Installation guide

Brand
Rock Slide Engineering
Model
Front Bumper Skid Plate
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents