Tyan Transport GT24 Specification

Transport GT24

B2912

Service Engineer’s Manual

i

PREFACE

Copyright

This publication, including all photographs, illustrations, and soft-

ware, is protected under international copyright laws, with all rights

reserved. Neither this manual, nor any material contained herein,

may be reproduced without written consent of the manufacturer-.

Version 1.0

Disclaimer

Information contained in this document is furnished by TYAN Com-

puter Corporation and has been reviewed for accuracy and reliability

prior to printing. TYAN assumes no liability whatsoever, and dis-

claims any express or implied warranty, relating to sale and/or use of

TYAN products including liability or warranties relating to fitness for

a particular purpose or merchantability. TYAN retains the right to

make changes to product descriptions and/or specifications at any

time, without notice. In no event will TYAN be held liable for any

direct or indirect, incidental or consequential damage, loss of use,

loss of data or other malady resulting from errors or inaccuracies of

information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Transport GT24 B2912 are trademarks of TYAN Com-

puter Corporation.

AMD, Opteron, and combinations thereof are trademarks of AMD

Corporation.

Nvidia and nForce are trademarks of Nvidia Corporation.

LSI is a trademark of LSI Logic Corporation.

ATI is a trademark of ATI Technologies Inc.

Microsoft, Windows are trademarks of Microsoft Corporation.

SuSE is a trademark of Novell, Inc.

Linux is a trademark of Linus Torvalds.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corpora-

tion.

ii

Federal Communications Commission (FCC)

Notice for the USA Compliance Information State-

ment (Declaration of Conformity Procedure) DoC FCC

Part 15: This device complies with part 15 of the FCC

Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including inter-

ference that may cause undesired operation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the

receiver.

– Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference

as specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe B d’interference radio tel que specifie par le Ministere Cana-

dien des Communications dans les reglements d’ineteference

radio.)

Notice for Europe (CE Mark) This product is in conformity

with the Council Directive 89/336/EEC, 92/31/EEC

(EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery

is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery

according to manufacturer instructions and in accordance with your

local regulations.

iii

About this Manual

This manual provides you with instructions on installing your

Transport GT24, and consists of the following sections:

Chapter 1: Provides an Introduction to the Transport GT24

B2912 barebones, packing list, describes the

external components, gives a table of key compo-

nents, and provides block diagrams of the system.

Chapter 2: Covers procedures on installing the CPU, mem-

ory modules, an optional PCI card, and hard

drives.

Chapter 3: Covers removal and replacement procedures for

pre-installed components.

Appendix: Describes the differences between mainboard

BIOS and system BIOS. The cable connection

tables are also provided for reference of system

setup.

Conventions

The following conventions are used in the manual:

Note: Calls attention to important information.

Warning: Provides information to prevent harm

to user or damage to equipment.

iv

SAFETY INFORMATION

Before installing and using the Transport GT24, take note of the fol-

lowing precautions:

– Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or stand.

– Do not block the slots and opening on the unit, which are pro-

vided for ventilation.

– Only use the power source indicated on the marking label. If

you are not sure, contact the Power Company.

– The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric shock.

Do not defeat the purpose of this pin. If your outlet does not

support this kind of plug, contact your electrician to replace

your obsolete outlet.

– Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

– Follow all warnings and cautions in this manual and on the

unit case.

– Do not push objects in the ventilation slots as they may touch

high voltage components and result in shock and damage to

the components.

– When replacing parts, ensure that you use parts specified by

the manufacturer.

– When service or repairs have been done, perform routine

safety checks to verify that the system is operating correctly.

– Avoid using the system near water, in direct sunlight, or near

a heating device.

– Cover the unit when not in use.

v

Table of Contents

Chapter 1:Overview

1.1 About the TYAN Transport GT24 B2912 . . . . . . . . . . . . . . . . . . .1

1.2 Product Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

1.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.5 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.5.1 System Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.5.2 System Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.5.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.5.4 System Internal View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.5.5 Motherboard (S2912) Block Diagram . . . . . . . . . . . . . . . . 12

1.5.6 S2912 Board Parts, Jumpers, and Connectors . . . . . . . . . . 14

Chapter 2:Setting Up

2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.0.2 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.0.4 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.1.1 Installing the Server in a Rack. . . . . . . . . . . . . . . . . . . . . . 19

2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . . 24

2.2.1 Removing the Chassis Cover. . . . . . . . . . . . . . . . . . . . . . . 24

2.2.2 Installing the CPU, Heatsink, and Air Duct. . . . . . . . . . . . 25

2.2.3 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2.2.4 Installing a PCI-E Card . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

2.3 Installing the Hard Drive for GT24-B2912. . . . . . . . . . . . . . . . . . 32

2.4 Installing the Slim FDD (Option) . . . . . . . . . . . . . . . . . . . . . . . . . 34

Chapter 3:Replacing Pre-Installed Components

3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.1.3 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . . 41

3.4.1 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . 41

3.4.2 Removing the Motherboard. . . . . . . . . . . . . . . . . . . . . . . . 42

3.5 Replacing the Slim DVD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . . 45

vi

3.6.1 M1003 LED Control Board Features. . . . . . . . . . . . . . . . . 47

3.6.2 M1003 LED Control Board Connector Pin Definition . . . 48

3.7 Replacing the M1012 Adapter Board . . . . . . . . . . . . . . . . . . . . . . 49

3.7.1 M1012 Adapter Board Features. . . . . . . . . . . . . . . . . . . . . 50

3.7.2 M1012 Adapter Board Connector Pin Definition . . . . . . . 51

3.8 Replacing the SAS/SATA Backplane. . . . . . . . . . . . . . . . . . . . . . 56

3.8.1 SAS/SATA Backplane (M1208) Features. . . . . . . . . . . . . 58

3.9 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Appendix I: BIOS Differences

Appendix II: Cable Connection Tables

Appendix III: Installing SMDC Card

Technical Support

Chapter 1: Overview 1

Chapter 1: Overview

1.1 About the TYAN Transport GT24 B2912

Congratulations on your purchase of the TYAN Transport

TM

GT24 B2912, a highly-optimized rack-mountable barebone

system. The TYAN Transport

TM

GT24 B2912 offers the latest

in dual processor server systems, providing a rich feature set

and incredible performance. Leveraging advanced technol-

ogy from AMD

®

, the TYAN Transport

TM

GT24 B2912 based

server system are capable of offering scalable 32 and 64-bit

computing, high-bandwidth memory design, and a lightning-

fast PCI-E bus implementation. The TYAN Transport

TM

GT24

B2912 not only empowers your company in today’s demand-

ing IT environment but also offers a smooth path for future

application usage.

The TYAN Transport

TM

GT24 B2912 uses TYAN’s latest tool-

ing-made chassis featuring a robust structure, tool-less and

modularized design, and a solid mechanical enclosure. All of

this provides the TYAN Transport

TM

GT24 B2912 the power

and flexibility to meet the needs of nearly any server applica-

tion.

2 Chapter 1: Overview

1.2 Product Models

B2912G24V4H

B2912G24W4H

Model HDD Bays

HDD

Supported

HDD

Backplane

Motherboard

B2912G24V4H

Removable,

4 HDDs

SATA

4-port

SAS/SATA

S2912G2NR

B2912G24W4H

Removable,

4 HDDs

SAS/SATA

4-port

SAS/SATA

S2912WG2NR

Chapter 1: Overview 3

1.3 Features

Enclosure

• Industry 19” rack-mountable 1U

chassis

– (1) slim DVD-ROM bay

– (4) 3.5” HDD bays

• Dimension:

D 25.4 x W 17.2 x H 1.72 inch

(645x436x43.6mm)

Processors

• Dual 1207-pin ZIF sockets

• Supports up to two AMD Opteron

TM

2000 series processors

• Two (2) onboard 4-phase digital VRMs

Chipset

• NVIDIA NFP 3600

• Winbond W83627HF Super IO

• Analog Devices ADT7476 Hard-

ware Monitoring IC

Memory

• Eight (8) 240-pin DDRII DIMM

sockets

• Supports up to 16GB of Registered

of DDRII 667/533/400 memory

Expansion Slots

• One (1) x8 and one (1) x16 PCI-E

with risers (pre-installed)

• Optional PCI-X riser card

• One (1) Tyan “TARO” SO-DIMM

connector

Back I/O Ports

• One (1) PS/2 Mouse and One (1)

Keyboard ports

• One (1) 9-pin UART Serial port

• One (1) 15-pin VGA port

• One (1) RJ45 connector for OPMA

• Two (2) USB2.0 ports

• Two (2) RJ45 10/100/1000 Base-T

port w/ activity LED

Front Panel Features

•I/O

– (2) USB 2.0 ports

•LED indicators

– Power LED

– (2) LAN LEDs

– HDD active LED

– Warning LED

–ID LED

•Switches

– Power switch

– Reset switch

Storage

• Model B2912G24V4H:

– Three (3) Integrated dual port

SATA Controllers from NFP 3600

– Supports 3Gb/s per port

– Supports Host RAID 0, 1, 10, 5,

JBOD

• Model B2912G24W4H:

– LSI 1064E SAS controller

– Four (4) SAS ports

– Supports RAID 0, 1E, 1

Networking

• Two Gigabit Ethernet ports (via Mar-

vell PHY 88E1121)

Video

• ATI® ES1000 controller

•PCI interface

• 32MB DDR memory

Motherboard

• B2912G24V4H

– TYAN Thunder K9ER S2912G2NR

• B2912G24W4H

– TYAN Thunder K9ER S2912WG2NR

• E-ATX footprint (13”x12”)

BIOS

• Phoenix 8Mbit LPC Flash ROM

• Supports ACPI (S0, S1, S3, S4, S5)

• PnP, DMI2.0, WfM 2.0 power man-

agement

• Serial Console Redirect

• User-configurable H/W monitoring

• Auto-configuration of hard disk

types

• Multiple boot options

• 48-bit LBA support

4 Chapter 1: Overview

Server Cooling

• (5) 40*40*28mm 14500rpm heavy-

duty fans with fan speed moni-

tor/control

• (2)Passive CPU Heatsink

Server Management

• Automatic fan speed control

• Supports Tyan Server Management

(TSM)

• Optional TYAN SMDC kit, IPMI 2.0

compliant

Power Supply

• EPS 12V, 1U, 500W with PFC

• 100V~240V AC input

Regulatory

• FCC Class B (Declaration of Con-

formity)

• CE (Declaration of Conformity)

Environment Temperature

• Operating temperature (5

o

C~35

o

C)

• Non-operating temperature (-40

o

C~

70

o

C)

Chapter 1: Overview 5

1.4 Unpacking

If any items are missing or appear damaged, contact your

retailer or browse to TYAN’s Web site for service:

http://www.tyan.com.

The Web site also provides information on other TYAN prod-

ucts, plus FAQs, compatibility lists, BIOS settings, and more.

1 x Tyan driver CD

Power Cords

Left to right: Europe, US

HDD Screws

Mounting Ears & Screws

Barebone Manual &

Mainboard Manual

PCI-X Riser Card

M2061 (Option)

Air Duct

2 x CPU Heatsinks

6 Chapter 1: Overview

Rail Kit

Mounting Bracket x 4

Screws Kit

Front

Rear

Sliding Brackets

Front L-Bracket x 2

Rear L-Bracket x 2

Sliding Rails x 2

FDD Rails & Screws

FDD Kit

FDD Backplane Cable

FDD Cable

FDD Backplane

Chapter 1: Overview 7

1.5 About the Product

This section contains the hardware diagrams and a block dia-

gram of the GT24 system.

1.5.1 System Front View

B2912G24V4H/B2912G24W4H

1.5.2 System Rear View

HDD activity LED

Power switch

Power LED

Reset switch

USB ports

Warning LED

2 x LAN LEDs

ID LED

DVD-ROM Drive

Hard Drive Bay x 4

Power Supply

Socket

PS/2 Mouse/Keyboard Ports

Serial

Port

VGA Port

ID LED

LAN Port (NIC2)

OPMA LAN

Power Supply LED

2 USB ports

PCI-E Slot

LAN Port (NIC1)

PCI-E Slot

8 Chapter 1: Overview

1.5.3 LED Definition

Front Panel

LED Color State Description

Power Green

OFF

ON

OFF

Power ON

Power OFF

HDD Activity Amber

OFF

Random Blinking

OFF

HDD access activity

No disk activity

LAN1/LAN2 Activity Green

Green

OFF

ON

Blinking

OFF

LAN linked

LAN accessing

No LAN linked

Warning Reserved LED for future upgrade. It is not functional in the

B2912 barebone now.

ID LED Reserved LED for future upgrade. It is not functional in the

B2912 barebone now.

Hot Swappable HDD

Tray Power LED

Green

OFF

ON

OFF

Power connected

Power disconnected

Hot Swappable SATA

HDD Access LED

Amber

OFF

Random Blinking

OFF

HDD access activity

No disk activity

Hot Swappable SAS

HDD Access LED

Amber

OFF

ON

Random Blinking

OFF

HDD ready

HDD access activity

HDD not ready

Chapter 1: Overview 9

Rear I/O LED

LED Color State Description

RJ45 NIC1/NIC2 Activity

(Left Side)

Green

OFF

Blinking

OFF

10Mb/100Mb linked

No LAN linked

RJ45 NIC1/NIC2 Linkage

(Right Side)

Green

OFF

ON

Blinking

OFF

10Mb activity, 100Mb/1000Mb linked

100Mb/1000Mb activity

NO LAN linked

ID LED Blue

OFF

ON

OFF

System is identified

System is not identified

Delta Power

Supply LED

Green

Amber

OFF

ON

1Hz Blinking

ON

1Hz Blinking

OFF

Output ON and OK

AC present/Only 5Vsb ON

Power supply critical event causing

a shutdown:

failure, OCP, OVP, fan fail

Power supply warning event where

the power supply continues to

operate: high temp., high power,

high current, slow fan

No AC power

10 Chapter 1: Overview

1.5.4 System Internal View

B2912G24V4H

1. PCI-E x16 Slot (with riser

card M2083 or PCI-X riser

card M2061)

2. PCI-E x8 Slot (with riser card

M2081-2)

3. EPS 12V Power Supply

4. CPU Sockets

5. System Fans (Right to left:

FAN1, FAN2, FAN3, FAN4,

FAN5)

6. Adapter Board

7. SAS/SATA Backplane

8. LED Control Board Cable

9. Four SAS/SATA HDDs

10. Slim DVD-ROM

11. DVD-ROM Cable

12. SAS/SATA cables

13. Memory Slots

9

11

10

4

5

6

7

8

13

1

32

12

Chapter 1: Overview 11

B2912G24W4H

9

11

10

4

5

6

7

8

1. PCI-E x16 Slot (with riser

card M2083 or PCI-X riser

card M2061)

2. PCI-E x8 Slot (with riser card

M2081-2)

3. EPS 12V Power Supply

4. CPU Sockets

5. System Fans (Right to left:

FAN1, FAN2, FAN3, FAN4,

FAN5)

6. Adapter Board

7. SAS/SATA Backplane

8. LED Control Board Cable

9. Four SAS/SATA HDDs

10. Slim DVD-ROM

11. DVD-ROM Cable

12. SAS/SATA cables

13. Memory Slots

13

3

12

1 2

12 Chapter 1: Overview

1.5.5 Motherboard (S2912) Block Diagram

Page is loading ...

Tyan Transport GT24 Specification

This manual is also suitable for

Tyan Transport GT24 Specification

Related papers

Other documents