Tyan Tank GT24 B5383 User manual

Tank™ GT24

B5383

Service Engineer’s Manual

Table of Contents

Chapter 1: Overview

1.1 About the Tank™ GT24 B5383…...………………….……...…….…

1

1.2 Product Models…………………..……………………….………....... 2

1.3 Features……………………………………………………………….. 3

1.4 Unpacking………………………………….……..………................... 5

1.4.1 Box Contents……………………...……………………………. 5

1.4.2 Accessories……………………………………………………... 7

1.5 About the Product……….………………………..……....................... 9

1.5.1 System Front View…………………………..…………………. 9

1.5.2 System Rear View………………………………….................... 9

1.5.3 Internal View…………………………………………………… 12

1.5.4 Motherboard Layout…………………………............................. 13

1.5.5 Jumpers & Connectors……………………………………......... 14

1.5.6 System Block Diagram……......................................................... 15

Chapter 2: Setting Up

2.0.1 Before You Begin………..…………………………................... 16

2.0.2 Work Area…………………………………………………….... 16

2.0.3 Tools …………….……………………....................................... 16

2.0.4 Precautions …………………………………………………...... 17

2.1 Rack Mounting………………….......................................................... 18

2.1.1 Installing the Server in a Rack………………............................. 18

2.2 Installing Motherboard Components...………………..………............ 23

2.2.1 Removing the Chassis Cover…………………………………... 23

2.2.2 Installing the CPU and Heatsink……………………………….. 24

2.2.3 Installing the Memory……………..…………………………… 27

2.3 Installing the Hard Drive……….….…………………………………. 30

2.4 Installing the Optional Floppy Drive ………………...……................. 32

Chapter 3: Replacing Pre-Installed Components

3.1 Introduction……………………………………………………………

34

3.1.1 Work Area……………………………………………………....

34

3.1.2 Tools…………………………………………….………............

34

3.1.3 Precautions……………………………………………………...

35

3.2 Disassembly Flowchart…………………………..……………………

36

3.3 Removing the Cover……………………………..…….……………...

37

3.4 Replacing Motherboard Components……………..…………………..

38

3.4.1 Disconnecting All Motherboard Cables…………………...........

38

3.4.2 Removing the Motherboard……………………………………..

40

3.5 Replacing the Slim DVD-ROM……..………………….......................

41

3.6 Replacing the LED Control Board..…………………………………...

43

3.6.1 M1003 LED Control Board Features…………………………...

45

3.6.2 M1003 LED Control Board Connector Pin Definition…………

46

3.7 Replacing the M1012 Adapter Board…………………………............

47

3.7.1 M1012 Adapter Board Features for B5383…………………......

48

3.7.2 M1012 Adapter Board Connector Pin Definition………………

49

3.8 Replacing the SAS/SATA (M1208) Backplane…………………........

53

3.8.1 SAS/SATA Backplane (M1208) Features……………………...

55

3.9 Replacing the Power Supply……..…………........................................

57

3.9.1 Replacing the 650W Power Supply……………………………..

57

3.9.2 Replacing the 600W Power Supply……………………………..

59

Appendix I: BIOS Differences

Appendix II: Cable Connection Table

Appendix III: Installing SMDC Card

Appendix IV: Installing M1000

PREFACE

Copyright

This publication, including all photographs, illustrations, and software, is

Neither this manual, nor any material contained herein, may be

reproduced without written consent of manufacturer.

Version 1.00

Disclaimer

Information contained in this document is furnished by TYAN Computer

Corporation and has been reviewed for accuracy and reliability prior to

printing. TYAN assumes no liability whatsoever, and disclaims any

express or implied warranty, relating to sale and/or use of TYAN

products including liability or warranties relating to fitness for a particular

purpose or merchantability. TYAN retains the right to make changes to

product descriptions and/or specifications at any time, without notice. In

no event will TYAN be held liable for any direct or indirect, incidental or

consequential damage, loss of use, loss of data or other malady

resulting from errors or inaccuracies of information contained in this

document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners

including, but not limited to the following.

TYAN and Tank™GT24 B5383 are trademarks of TYAN Computer

Corporation.

Interl, Xeon, and combinations thereof are trademarks of Intel

Corporation.

Phoenix, PhoenixBIOS, and combinations thereof are trademarks of

Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corporation.

i

Federal Communication Commission (FCC)

Notice for the USA Compliance Information

Statement (Declaration of Conformity

Procedure) DoC FCC Part 15: This device

complies with part 15 of the FCC Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference;

2) This device must accept any interference received including

interference that may cause undesired operation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the receiver.

– Plug the equipment into an outlet on a circuit different from that of

the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference

as specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe B d’interference radio tel que specifie par le Ministere

Canadien des Communications dans les reglements d’ineteference

radio.)

Notice for Europe (CE Mark)

This product is in conformity with the Council

Directive 89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. Danger of explosion if battery is

incorrectly replaced. Replace only with the same or equivalent type

recommended by manufacturer. Dispose of used battery according

to manufacturer instructions and in accordance with your local

regulations.

ii

About this Manual

This manual provides you with instructions on installing your

Tank™GT24-B5383. This Manual is intended for experienced

users and integrators with hardware knowledge of personal

computers.

This manual consists of the following parts:

Chapter1:

Provides an introduction to the GT24 B5383

barebones, packing list, describes the

external components, gives a table of key

components, and provides block diagrams of

the system.

Chapter2:

Covers procedures on installing the CPU,

memory modules, hard drives and Slim FDD

(optional).

Chapter3:

Covers removal and replacement

procedures for pre-installed components.

Appendix I:

Describes the differences between

mainboard BIOS and system BIOS.

Appendix II:

Listing the cable connection tables for

reference of system setup.

Appendix III:

Covers procedures on installing the SMDC

Card

.

Appendix IV:

Covers procedures on installing M1000.

iii

SAFETY INFORMATION

Before installing and using the Tank™GT24-B5383, take note of the

following precautions:

–

Read all instructions carefully.

–

Do not place the unit on an unstable surface, cart, or stand.

–

Do not block the slots and opening on the unit, which are

provided for ventilation.

–

Only use the power source indicated on the marking label.

If you are not sure, contact the power company.

–

The unit uses a three-wire ground cable, which is equipped

with a third pin to ground the unit and prevent electric

shock. Do not defeat the purpose of this pin. If you outlet

does not support this kind of plug, contact your electrician

to replace your obsolete outlet.

–

Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

–

Follow all warnings and cautions in this manual and on the

unit case.

–

Do not push objects in the ventilation slots as they may

touch high voltage components and result in shock and

damage to the components.

–

When replacing parts, ensure that you use parts specified

by the manufacturer.

–

When service or repairs have been done, perform routine

safety checks to verify that the system is operating

correctly.

–

Avoid using the system near water, in direct sunlight, or

near a heating device.

–

Cover the unit when not in use.

iv

Chapter 1: Overview

1.1 About the Tank™ GT24 B5383

Congratulations on your purchase of the TYAN Tank™GT24

B5383, a highly-optimized rack-mountable barebone system.

The Tank™GT24 B5383 is designed to support dual Intel®

Dempsey/Woodcrest/Clovertown processors, providing a rich

feature set and incredible performance. Leveraging advanced

technology from Intel, the Tank™ GT24 B5383 server system

is capable of offering scalable 32 and 64-bit computing,

supporting up to 64GB DDR2-533/667 FBDIMM. The Tank™

GT24 B5383 not only empowers your company in today’s

demanding IT environment but also offers a smooth path for

future application usage.

TYAN is also proud to deliver the Tank™ GT24 B5383 in

SATAII/SAS flavor while supporting up to four (4) hot-swap

hard drives, one (1) slim DVD-ROM, and one (1) optional slim

floppy disk drive. The Tank™ GT24 B5383 uses TYAN’s

latest tooling-made chassis featuring a robust structure,

tool-less and modularized design, and a solid mechanical

enclosure. All of this provides the Tank™ GT24 B5383 the

power and flexibility to meet the needs of nearly any server

application.

Chapter 1: Product Overview

1

1.2 Product Models

Model HDD Bay

HDD

Supported

Backplane Motherboard

B5383G24W4H

Removable,

4 HDDs

SAS

4-port

SAS/SATAII

S5383WG4NR

2

Chapter 1: Product Overview

1.3 Features

Enclosure

• Industry 19” rack-mountable 1U

chassis

– (1) slim DVD-ROM bay

– (4) 3.5” HDD bay

• Dimension:

D25.4 x W 17.2 x H1.72 inch

(645 x 436 x 43.6mm)

Processors

• Dual LGA771 Socket

• Supports up to two Intel®

“Dempsey/Woodcrest/Clovertown”

processors

• 1333/1066/667 MT/s FSB

• VRD11.0

Chipset

• Intel® ‘Blackford’ MCH + 6321ESB

chipset

• Supports for 1333/1066/667 MT/s

FSB

• Winbond 83627HF super I/O chip

Memory

• (16) 240-pin DDRII FBDIMM on

board

• Maximum of 64GB DDRII-533/667

Back I/O Ports

• (1) PS/2 Mouse & (1) Keyboard

port

• (1) 9-pin UART Serial port

• (1) 15-pin VGA port

• (2) USB2.0 ports

• (4) RJ45 10/100/1000 Base-T port

with activity LED

Front Panel Features

• I/O

– (2) USB2.0 ports

• LED indicators

– Power LED

– (2) LAN LEDs (for 2 port LAN

from Intel Gilgal (82563EB))

– HDD Active LEDs (only for HDD

connected to SATA connector)

– ID LED

– Warning LED

• Switches

– Power

– Reset

– ID

– NMI

Integrated Storage Controller

• Onboard LSI 1068E SAS Controller

Storage

• Support (4) hot-swappable SAS

HDD with RAID 0,1 and 1E support;

• Pre-installed (1) slim type

DVD-ROM

Networking

• One Intel® ‘Gilgal’ (82563EB) PHY.

¾ Direct link to ESB2

¾ Two Gigabit LAN ports

• One Intel® ‘Gilgal’ (82571EB) PHY.

¾ Link to MCH

¾ Two Gigabit LAN ports

Video

• ATI ES1000

• PCI Interface

• 32MB DDR memory

Motherboard

• TYAN Tempest i5000PT S5383

•

SSI/Extended ATX (13” x 12”)

• EPS12V/SSI (24 + 8 + 4pin) power

connectors

BIOS

• Phoenix® 8Mbit LPC Flash ROM

• Supports APM 1.2, ACPI 1.0b

• Serial Console Redirect

• PXE via Ethernet, USB device boot

Chapter 1: Product Overview

3

• PnP, DMI2.0 WfM2.0 power

management

• User-configurable H/W monitoring

• Auto-configuration of hard disk

types

• Multiple boot options

• 48-bit LBA support

Sever Management

• Automatic fan speed control

• Support Tyan Server

Management (TSM)

• Optional TYAN SMDC kit, IPMI

2.0 compliant

System Cooling

• (4) 40*40*56mm 14500rpm

system fans

• (1) 40*40*28mm 14000rpm

system fan

• (2) passive CPU heatsinks

Power Supply

• PS 12V, 1U, 650W/600W with PFC

• 100V~240V AC input

Regulatory

• FCC Class B (Declaration of

Conformity)

• CE (Declaration of Conformity)

Environment Temperature

• Operating temperature: 5°C ~ 35°C

• Non-operating temperature:

-40°C ~ 70°C

4

Chapter 1: Product Overview

1.4 Unpacking

This section describes the Tank™GT24 B5383 package contents

and accessories. Open the box carefully and ensure that all

components are present and undamaged. The product should arrive

packaged as illustrated below.

1.4.1 Box Contents

Component Description

Industry standard 1U chassis, (4)

hot-swap HDD bays

Tyan S5383 system board

(pre-installed)

1 x slim DVD-ROM drive

(pre-installed)

2 x Heatsink

M1003：

LED and USB control board

(pre-installed)

Chapter 1: Product Overview

5

Component Description

Air Duct

(4) System fans (40mm x 40mm x

56mm)

(1) System fans (40mm x 40mm x

28mm)

M1012 Adapter Board

M1208 SAS/SATA Backplane

EPS 1U 650W with PFC

EPS 1U 600W with PFC

6

Chapter 1: Product Overview

1.4.2 Accessories

If any items are missing or appear damaged, contract your retailer or

browse to TYAN’s website for service：

http://www.tyan

.com

The Web site also provides information on other TYAN products,

plus FAQs, compatibility lists, BIOS settings, and more.

1 x Tyan Barebone Drive CD

Barebone Manual &

Motherboard Manual

SMDC Kit HDD Screws

Mounting Ears & Screws

Power Cables

Left to right: Europe, US

SMDC Cable

Chapter 1: Product Overview

7

Rail Kit

Mounting Bracket x 4 Screw Kit

Sliding Rail x 2

Sliding Brackets

Front L-Bracket x 2

Rear L-Bracket x 2

FDD Kit

FDD Backplane Cable FDD Cable

FDD Rails & Screws

8

Chapter 1: Product Overview

1.5 About the Product

The following views show you the product.

1.5.1 System Front View

The following views show you the product.

1.5.2 System Rear View

Power Supply Socket

PS/2 Mouse/Keyboard Ports

LAN2 Port

LAN3 Port

LAN4 Port

LAN1 Port

USB Ports

Serial Port

VGA Port

DVD-ROM Drive

Hard Drive Bay x 4

USB Ports

Power Switch

ID LED

2 x LAN LEDs

ID Switch

NMI Switch

Reset Switch

Power LED

HDD Activity LED

Warning LED

Chapter 1: Product Overview

9

LED Definition

Front Panel

LED Color State Description

Power

Green

——

ON

OFF

Power ON

Power OFF

HDD Activity

Amber

——

Blinking

OFF

HDD access activity

No disk activity

LAN1/LAN2 Linkage

Green

——

ON

Blinking

OFF

LAN Linked

LAN Accessing

No LAN link

Warning

Red

——

ON

OFF

Fan failure

Over Temperature

Voltage failure

Normal

Hot Swappable HDD

Tray Power LED

Green

——

ON

OFF

HDD connected

HDD disconnected

Hot Swappable SATA

HDD Access LED

Amber

——

Blinking

OFF

HDD access activity

No disk activity

Hot Swappable SAS

HDD Access LED

Amber

Random Blinking

On

HDD access activity

No disk activity (HDD ready)

ID LED

Blue

——

ON

OFF

System identified

System not identified

LAN 1 Port

→

Onboard LAN 1

LAN 2 Port

→

Onboard LAN 2

10

Chapter 1: Product Overview

Rear I/O LED

LED Color State Description

RJ45 NIC1 Linkage

(Left Side)

Green

——

ON

Blinking

OFF

LAN Linked

LAN Accessing

No LAN link

RJ45 NIC1 Mode

(Right Side)

Amber

——

Blinking 3

Blinking 2

Blinking 1

OFF

Gigabit mode

100M mode

10M mode

No LAN link

RJ45 NIC2 Linkage

(Left Side)

Green

——

ON

OFF

LAN Linked

LAN Accessing

No LAN link

RJ45 NIC2 Mode

(Right Side)

Amber

——

Blinking 3

Blinking 2

Blinking 1

OFF

Gigabit mode

100M mode

10M mode

No LAN link

ID LED

Blue

——

ON

OFF

System identified

System not identified

Chapter 1: Product Overview

11

1.5.3 Internal View

1. Memory Slots 7. Four SATA/SAS HDD Bays

2. Power Supply 8. Slim DVD-ROM

3. CPU Air Duct 9. DVD Power Cable

4. System Fans 10. DVD-ROM Cable

5. SAS/SATA Backplane (M1208) 11. M1012 Adapter Card

6. LED Control Board Cable

12

Chapter 1: Product Overview

Page is loading ...

Tyan Tank GT24 B5383 User manual

Tyan Tank GT24 B5383 User manual

Related papers

Other documents