Elite Screens ZU12V User guide

Elite Screens
Brand
Elite Screens
Model
ZU12V
Category
Remote controls
Type
User guide
www.elitescreens.com
[email protected]
Product overview: The Elite Screens ZU12V is a wireless Radio Frequency trigger that synchronizes the
projector’s power cycle utilizing the power to wirelessly drop and raise all Elite Screens electric projection
screens.
ZU12V
Universal Wireless 12 Volt Projector Trigger
User Guide
v12.1 10/12
Product Introduction
Trigger Diagram Trigger Operation Diagram
Disconnect the power cord from the power outlet on your Elite Screens electric screen. Unplug the
projector’s power cord and connect it to the trigger as shown above (Fig. 1). Follow by the synchronization
process.
Instructions
Connector to projector
Trigger power cord
Button 1
Trigger light
Button 2
Projector power cord
(Not included)
Projector power cord
Insert
(Fig. 1)
1. Connect the trigger power cord,
light turns red after connection
2. Press & hold [Button 1] with a
sharp object, do not release
until after step 4
3. Connect the electric screen’s
power cord into the outlet
while holding down [Button 1]
4. Trigger light will start to blink red
5. Release [Button 1] after 3
seconds (screen will drop
automatically). Light blinks blue
after release
Projector power cord
6. Connect the trigger power cable
to the projector
7. Turn on the projector, press &
hold [Button 2] for 3 seconds
8. Light will blink red to indicate
synchronization
9. Synchronization is now
complete. Test the synchroni-
zation by turning the projector
off, screen will retract auto-
matically if the synchronization
is successful.
NOTE: Operation range for ZU12V is 25 meters. ZU12V is only compatible with Elite’s electric screens.
Projector with no Wireless Trigger ? No Problem
ower cord from the er cord from th
ower cord and connewer cord and con
ss.
o
sT
T
T
Tr
Tr
Tr
ri
ri
rig
ig
ig
g
gg
gg
g
e
le
le
Universal 12V Trigger (ZU
e power outlet on yopower outlet on
nect it to the trigger at it to the trigger
Con
C
Available at shop.elitescreens.com
Av
Av
A
A
Av
our Elite Screens elecr Elite Screens ele
s shown above (Fig. 1)hown above (Fig. 1
A
A
A
A
ect the trigger power coect the trigger power
light turns red after conlight turns red after c
2. Press & hold2. Press & ho
sharp sharp
u
A
A
A
A
A
A
o
co
com
sc
c
c
c
c
co
co
o
o
o
om
om
  • Page 1 1

Elite Screens ZU12V User guide

Elite Screens
Brand
Elite Screens
Model
ZU12V
Category
Remote controls
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents