AGF Manufacturing 408-3 Installation guide

Type
Installation guide

This manual is also suitable for

AGF Manufacturing 408-3 is a 2" TESTANDRAIN valve designed to test and drain water systems. It can be installed on outlet pipe nipples from feed mains and secured to acceptable drain fixtures or active express drains. The valve has an indicating plate to confirm the correct orifice size and a handle that can be turned counterclockwise from “OFF” to “TEST” or “DRAIN” positions. To test, turn the handle to “TEST” and it will stop automatically. To drain, turn the handle to “TEST”, depress the “PUSH” button, and turn the handle to “DRAIN”.

AGF Manufacturing 408-3 is a 2" TESTANDRAIN valve designed to test and drain water systems. It can be installed on outlet pipe nipples from feed mains and secured to acceptable drain fixtures or active express drains. The valve has an indicating plate to confirm the correct orifice size and a handle that can be turned counterclockwise from “OFF” to “TEST” or “DRAIN” positions. To test, turn the handle to “TEST” and it will stop automatically. To drain, turn the handle to “TEST”, depress the “PUSH” button, and turn the handle to “DRAIN”.

Feed Main
To Drain
OUT
300 WOG
AGF MFG INC.
IN
Site Glass
Outlet
Nipple
Inlet
TEST
ANDRAIN
INSTALLATION INSTRUCTIONS
FOR 2" TEST
ANDRAIN
TM
MODEL 2500
1. Check the indicating plate to confirm the correct orifice size is
being installed.
2. Using an approved 2" coupling and following the coupling man-
ufacturers installation instructions, secure TEST
ANDRAIN "IN" to
outlet pipe nipple from feed main.
3. Using an approved 2" coupling and following the coupling man-
ufacturers installation instructions, secure TEST
ANDRAIN "OUT"
to an acceptable drain fixture or active express drain as required.
NOTE: Care should be taken to insure that coupling will not inter-
fere with the operation of the valve handle.
Test
O
f
f
D
ra
in
TESTAN
DRAIN® Model 2500 Valve
Operating Instructions
A. TO TEST:
1. Turn valve handle counterclockwise from “OFF” to
“TEST.” The handle will stop automatically.
2. After test is completed, return handle to “OFF.”
B. TO DRAIN:
1. Turn handle counterclockwise from “OFF” to “TEST.”
The handle will stop automatically.
2. Depress “PUSH” button and turn handle to “DRAIN.”
3. When system is empty, return handle clockwise to
“OFF” position
LIMITED WARRANTY: AGF Manufacturing, Inc.warrants each product against
defects in material and workmanship for a period of one year from the date of
original shipment. In the event of such defects within the warranty period, the
Company will, at its option, replace or recondition the product without charge.
This shall constitute the exclusive remedy for breach of warranty, and the
Company shall not be responsible for any incidental or consequential damages,
including, without limiation, damages or other costs resulting from labor
charges, delays, vandalism, negligence, fouling caused by foreign material,
damage from adverse water conditions, chemicals or any other circumstances
over which the Company has no control. This warranty shall be invalidated by
any abuse, misuse, misapplication or improper installation of the product. THE
COMPANY MAKES NO OTHER WARRANTIES EXPRESS OR IMPLIED
EXCEPT AS PROVIDED IN THIS LIMITED WARRANTY.
AGF Manufacturing Inc.
100 Quaker Lane
Malvern, PA 19355
Tel: (610) 240-4900
Fax: (610) 240-4906
www.testandrain.com
  • Page 1 1
  • Page 2 2

AGF Manufacturing 408-3 Installation guide

Type
Installation guide
This manual is also suitable for

AGF Manufacturing 408-3 is a 2" TESTANDRAIN valve designed to test and drain water systems. It can be installed on outlet pipe nipples from feed mains and secured to acceptable drain fixtures or active express drains. The valve has an indicating plate to confirm the correct orifice size and a handle that can be turned counterclockwise from “OFF” to “TEST” or “DRAIN” positions. To test, turn the handle to “TEST” and it will stop automatically. To drain, turn the handle to “TEST”, depress the “PUSH” button, and turn the handle to “DRAIN”.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI