USER’S MANUAL
PADDED
HAND-
GRIP
STRAP
WITH
ARCA-T YPE
PL ATE
PGS-P
• Please read and follow these instructions, and keep this
manual in a safe place.
• Make sure that this product is intact and that there are no
missing parts.
• Make sure that all connections and attachments are secure
before proceeding.
• All images are for illustrative purposes only.
PRECAUTIONS
The Vello Hand Grip Strap assures you of a constant firm grip
on your camera while you’re out shooting. The strap adjusts
to your hand, and an extra security strap wraps around your
wrist and lets the camera hang securely while you’re walking or
moving around. You’ll always be prepared to capture the shot
when you’re walking through the country or around the city
because when the moment arrives, all you need to do is raise
the camera to eye level and shoot.
The hand strap attaches to your camera’s /4-20 tripod socket
with an Arca-style quick-release baseplate, which can mount
onto a tripod or head when you need more support. The
ergonomic strap is padded for comfort during extended use.
When your hand gets fatigued, you can easily attach a shoulder
or cross-body strap to the fold-down eyelet on the baseplate.
THANK YOU FOR CHOOSING VELLO
SPECIFICATIONS
Strap Length 6 in. (15.2 cm)
Strap Width 2.25 in. (5.7 cm)
Material Leather
Zinc alloy
Weight 3.4 oz. (97 g)
Mounting Options Arca-style quick-release plate
1/4-20
Carry Options Eyelet for shoulder strap
Camera Mount 1/4-20 male
6
7
8
5
4
3
2
OVERVIEW
1
Hand strap
2
Top strap
3
Detachable security strap
4
Bottom strap
5
Arca-style baseplate
6
/4-20 mounting screw
7
Eyelet release button
8
Eyelet
3. Thread the top strap
through the loop and
the buckle, and tuck the
end of the strap into the
pocket.
ATTACHING THE STRAP AND FITTING TO YOUR
HAND
1. Screw the baseplate
into the camera’s tripod
socket so the eyelet
doesn’t cover the
battery compartment.
2. Thread the top strap up
through the camera lug
on the trigger side.
5. Wrap the security
strap around the inside
of your wrist.
4. Put your hand through
the strap. The strap
should fit snugly around
your hand. To tighten
the strap around your
hand, shorten the
bottom strap.
6. Adjust the strap’s length
until it fits snugly around
your wrist.
MOUNTING TO A TRIPOD OR HEAD
The PGS-P can be mounted
onto a tripod or head.
1. Loosen your tripod head’s
Arca-style clamp, and
insert the baseplate.
2. Support your camera
with one hand while you
balance the camera, and
tighten the Arca clamp
until secure.
Important! If the eyelet is not flush against the bottom of the
camera, it will not fit into the clamp. Press the eyelet release
button, and fold it up against the camera’s base.
ATTACHING A SHOULDER OR CROSS-BODY STRAP
You can carry your camera on a shoulder strap, so it hangs
upside down at your hip with or without the hand strap.
1. Press the eyelet release
button, and fold the
eyelet down until it
snaps into place.
2. Attach the shoulder
strap to the eyelet, and
adjust the strap to the
desired length.
One-Year Limited Warranty
This Vello product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for
a period of one (1) year from the original purchase date or thirty (30)
days after replacement, whichever occurs later. The warranty provider’s
responsibility with respect to this limited warranty shall be limited solely to
repair or replacement, at the provider’s discretion, of any product that fails
during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT
AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This
warranty provides you with specic legal rights, and you may also have
additional rights that vary from state to state.
To obtain warranty coverage, contact the Vello Customer Service
Department to obtain a return merchandise authorization (“RMA”) number,
and return the defective product to Vello along with the RMA number and
proof of purchase. Shipment of the defective product is at the purchaser’s
own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call
Customer Service at 212-594-2353.
VELLO
®
A Gradus Group Brand
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Vello is a registered trademark of the Gradus Group.
© 2020 Gradus Group LLC. All Rights Reserved.
GG1
/
