Extron TLP Pro 1525MG Template

Hello! I am an AI chatbot trained to assist you with the Extron TLP Pro 1525MG Template. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Cut-Out Template for the Extron

TLP Pro 1525MG

0.685"

(15.2 mm)

0.685"

(15.2 mm)

Page size: 11" x 17"

Print scale 1:1

Do not shrink.

SURFACE

CUT-OUT

AREA

Outer Edge of Front Bezel

(Do not cut this line.)

P/N 68-3574-01

Rev. A

Mounting Holes (4)

6.65"

(168.9 mm)

9.63" (244.6 mm)

7.25"

(184.2 mm)

11.00" (279.4 mm)

0.68"

(17.3 mm)

0.08"

(2.00 mm)

Take into account that the

bottom edge of the touchpanel

is below the bottom of this page.

The sides of the touchpanel

are 11.02 inches (27.99 cm).

1. Confirm the product to be installed.

2. Before printing, check the print settings

and make sure the page is not scaled.

3. After printing, measure the cut-out area (gray)

and ensure it matches the dimensions shown

on this template.

4. Remove the surface cut-out area from the

template. (Keep these instructions.)

5. Use this template to mount the TLP Pro 1525MG.

For complete instructions, see the product

Setup Guide or User Guide.