Audioplex ABW-AUTO 1C Installation guide

Audioplex
Brand
Audioplex
Model
ABW-AUTO 1C
Type
Installation guide

Audioplex ABW-AUTO 1C

Audioplex ABW-AUTO 1C is a free-standing, automatic source switch that allows two different audio sources to be connected to a single Amplifier/Receiver. The ABW-AUTO 1C LINE LEVEL detects which source is in operation and routes the signal to the Amplifier/Receiver. This eliminates the need to manually switch between sources, providing a seamless and convenient audio experience.

The ABW-AUTO 1C LINE LEVEL is easy to install and use. Simply connect your audio sources and Amplifier/Receiver to the appropriate connectors on the back of the unit. The ABW-AUTO 1C LINE LEVEL will automatically detect which source is active and route the signal accordingly.

Audioplex ABW-AUTO 1C

Audioplex ABW-AUTO 1C is a free-standing, automatic source switch that allows two different audio sources to be connected to a single Amplifier/Receiver. The ABW-AUTO 1C LINE LEVEL detects which source is in operation and routes the signal to the Amplifier/Receiver. This eliminates the need to manually switch between sources, providing a seamless and convenient audio experience.

The ABW-AUTO 1C LINE LEVEL is easy to install and use. Simply connect your audio sources and Amplifier/Receiver to the appropriate connectors on the back of the unit. The ABW-AUTO 1C LINE LEVEL will automatically detect which source is active and route the signal accordingly.

Your AUDIOPLEX TECHNOLOGY ABW-AUTO 1C LINE LEVEL is covered by a
Lifetime warranty against any defects in workmanship and materials. Any defects will
be remedied without charge for labor or parts.
Damage incurred by shipping or accident is not considered to be a defect, and not
covered by this warranty. AUDIOPLEX TECHNOLOGY, is not responsible for
defective operation caused by abuse or by modification or service by any unauthorized
person or agency.
The unit must be properly installed and operated according to instructions for the
warranty to apply. Any necessary servicing must be done by AUDIOPLEX
TECHNOLOGY. The product must be returned expenses prepaid, with written
authorization from the company. The product must be shipped with the proof of
purchase and in the original carton and packing material to avoid damage.
This warranty gives you specific legal rights. You may have other rights which vary
from state to state.
ABW-AUTO 1C LINE LEVEL
AUTOMATIC SOURCE SWITCH
Your ABW-AUTO 1C LINE LEVEL is a free standing, automatic source switch,
which allows two different audio sources to be connected to a single Amplifier/Receiver.
The ABW-AUTO 1C LINE LEVEL detects which source is in operation and routes the
signal to the Amplifier/Receiver.
Power supply: 12 VDC @ 500 mA
Dimensions: 6"W x 2.75"H x 5"D
Connectors: RCA Connectors.
Connections to sources and the amplifier/receiver are illustrated on the back of these
instructions. Remember that the LEFT and RIGHT circuits are separate, so connections
must be made correctly or the system will not operate properly.
TECHNOLOGY
INSTALLATION MANUAL
SPECIFICATIONS
INSTALLATION
WARRANTY
2000 - 6/22/00
ABW-AUTO 1C LINE LEVEL
AUTOMATIC SOURCE SWITCH
(WIRING DIAGRAM)
AUDIOPLEX TECHNOLOGY
404 GWH, P.O. BOX 440
MELVIN VILLAGE, N.H. 03850
1-800-257-2077 IN N.H. 1-603-544-8601
FAX: 1-603-544-8901
E-mail: [email protected]
2000 - 6/22/00
disc 5 2.53
tape b
A
R L
R L
R L
B
DVD DOLBY DIGITAL
AMPLIFIER/RECEIVER
SOURCE A SOURCE B
12 VDC
  • Page 1 1
  • Page 2 2

Audioplex ABW-AUTO 1C Installation guide

Audioplex
Brand
Audioplex
Model
ABW-AUTO 1C
Type
Installation guide

Audioplex ABW-AUTO 1C

Audioplex ABW-AUTO 1C is a free-standing, automatic source switch that allows two different audio sources to be connected to a single Amplifier/Receiver. The ABW-AUTO 1C LINE LEVEL detects which source is in operation and routes the signal to the Amplifier/Receiver. This eliminates the need to manually switch between sources, providing a seamless and convenient audio experience.

The ABW-AUTO 1C LINE LEVEL is easy to install and use. Simply connect your audio sources and Amplifier/Receiver to the appropriate connectors on the back of the unit. The ABW-AUTO 1C LINE LEVEL will automatically detect which source is active and route the signal accordingly.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents