Edelkrone SliderPlus User manual

Category
Security camera accessories
Type
User manual

Edelkrone SliderPlus is a camera slider that allows you to create smooth, professional-looking sliding shots. It can be mounted directly to your tripod or used on its own feet, and it can travel up to twice its own length when mounted on a tripod. It features a 3/8"-16 screw for attaching your tripod head, and it comes with a pop-up screw for easy mounting and dismounting. The SliderPlus also has feet knobs for leveling your system and a protection bar to keep your camera safe.

Edelkrone SliderPlus is a camera slider that allows you to create smooth, professional-looking sliding shots. It can be mounted directly to your tripod or used on its own feet, and it can travel up to twice its own length when mounted on a tripod. It features a 3/8"-16 screw for attaching your tripod head, and it comes with a pop-up screw for easy mounting and dismounting. The SliderPlus also has feet knobs for leveling your system and a protection bar to keep your camera safe.

SLIDERPLUS
Before operating your edelkrone,
please watch the users manual video.
USER’S MANUAL
TABLE OF CONTENTS
WHAT’S IN THE BOX & THE BASICS.
MOUNTING YOUR SLIDERPLUS TO YOUR TRIPOD
MOUNTING YOUR CAMERA TO YOUR SLIDERPLUS
CAUTIONS & TIPS
1.
2.
3.
4.
1. WHAT’S IN THE BOX & THE BASICS
SliderPLUS/PRO
Pop up screw
3 mm allen wrench
1/
2/
3/
4/
5/
6/
Tripod screw port
Protection bar
Feet knobs
1
2
3
5
4
6
2. MOUNTING YOUR SLIDERPLUS TO YOUR TRIPOD
1/ Detach tripod head 2/ Put your SliderPLUS/PRO on top of your
tripod and turn it clockwise until it’s tight.
1
2
*Detailed video explaining how to attach this belt and mountaing details can be found
from : manuals.edelkrone.com
Detailed video explaining mounting your SliderPLUS to your tripod steps at the link:
manuals.edelkrone.com
3. MOUNTING YOUR CAMERA TO YOUR SLIDERPLUS
1/
2/
3/
SliderPLUS has 3/8”-16 screw for your tripod head hidden inside. You can access this screw
with the help of a coin.
Using a coin, turn the screw until it pops out.To lock the screw back again just press it down
and turn it counter clockwise.
Place your tripod head on the screw and turn it clockwise until it tightens.
2
1
3
*Before operating your product, please watch the users manual videos from the link:
manual.edelkrone.com
Before operating your product, please watch the users manual videos from the link:
manuals.edelkrone.com
4. CAUTIONS & TIPS
1. In order to get perfect results with your
SliderPLUS/PRO please attach your
SliderPLUS/PRO directly to the tripod legs.
Please contact our dedicated customer care team for recommended tripod legs.
2. If your tripod has a feature that allows you
to extend the height from its neck, we suggest
keeping it down and as tight as possible in
order to prevent a rainbow eect.
*Before operating your product, please watch the users manual videos from the link:
manual.edelkrone.com
Before operating your product, please watch the users manual videos from the link:
manuals.edelkrone.com
4. Always keep your slider locked while its not inuse.
5. Use feet knobs to level your system.
6. SliderPLUS/PRO can travel twice it’s own length when it’s mounted on a tripod. While
using it on its feet, it can only travel it's own length.
3. Please be sure that your SliderPLUS/PRO
withstands within the area of the tripod legs
to prevent falls and balance issues.
Always make sure that your system is leveled
and balanced.
*Before operating your product, please watch the users manual videos from the link:
manual.edelkrone.com
For more sliding tips please watch the users manual videos from the link:
manuals.edelkrone.com
© 2016, edelkrone
edelkrone cannot be held responsible for damage caused by improper use or
modification of the product.
For more infromation and tips about your SliderPLUS, please watch
the user’s manual videos at the link, manuals.edelkrone.com
www.edelkrone.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Edelkrone SliderPlus User manual

Category
Security camera accessories
Type
User manual

Edelkrone SliderPlus is a camera slider that allows you to create smooth, professional-looking sliding shots. It can be mounted directly to your tripod or used on its own feet, and it can travel up to twice its own length when mounted on a tripod. It features a 3/8"-16 screw for attaching your tripod head, and it comes with a pop-up screw for easy mounting and dismounting. The SliderPlus also has feet knobs for leveling your system and a protection bar to keep your camera safe.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI