2. IXXAT
  3. LIN-Kit

IXXAT LIN-Kit Owner's manual

  • Hello! I've reviewed the Hardware Manual for the IXXAT LIN interface module designed for iPC-I XC16/PCI and iPC-I XC16/PCIe interfaces. This manual provides technical information including the pin assignments of the SUB-D9 connector, electrical specifications such as the voltage and current requirements and other specifications. I'm ready to help you with any questions you have about this module.
  • What is the LIN driver used in this module?
    What is the voltage range for the VBAT input?
    What is the maximum current on the VBAT input?
    What type of connector is used for the LIN interface?
    What interfaces is this module designed for?
Hardware Manual
LIN interface module
for iPC-I XC16/PCI and iPC-I XC16/PCIe
The expert for industrial and automotive communication
Copyright IXXAT Automation GmbH
LIN Interface for iPCI-I XC16/PCI
LIN Module
The IXXAT LIN module for the PC/CAN interfaces iPC-I XC16/PCI and iPC-I XC16/PCIe is a
feature. The following figure shows the LIN module.
Figure 1.1: LIN Module
The pin assignment of the SUB-D9 connector is shown in the following figure.
SUB-D9
Pin no.
Signal
1
LIN
2
-
3
GND
4
-
5
-
6
-
7
-
8
-
9
12 V VBAT input
Figure 1.2: Pin assignment of the SUB-D9 connector
Technical data:
LIN driver: TJA1020T
Voltage on VBAT input: 8 to 18 V DC
Current on VBAT input: max. 36 mA
IXXAT
Headquarter US Sales Office
IXXAT Automation GmbH IXXAT Inc.
Leibnizstr. 15 120 Bedford Center Road
D-88250 Weingarten USA-Bedford, NH 03110
Tel.: +49 (0)7 51 / 5 61 46-0 Phone: +1-603-471-0800
Fax: +49 (0)7 51 / 5 61 46-29 Fax: +1-603-471-0880
Internet: www.ixxat.de Internet: www.ixxat.com
e-Mail: [email protected] e-Mail: [email protected]m
Support
In case of unsolvable problems with this product or other IXXAT prod-
ucts please contact IXXAT in written form by:
Fax: +49 (0)7 51 / 5 61 46-29
e-Mail: [email protected]e
Copyright
Duplication (copying, printing, microfilm or other forms) and the elec-
tronic distribution of this document is only allowed with explicit per-
mission of IXXAT Automation GmbH. IXXAT Automation GmbH re-
serves the right to change technical data without prior announcement.
The general business conditions and the regulations of the license
agreement do apply. All rights are reserved.
Document number: 4.01.0047.20001
Version: 1.0
/