Roland Super UA Owner's manual

Note When Using GarageBand or Logic with Super UA

When Using GarageBand

Do not start GarageBand if the UA-S10 control panel is already running.

Also, do not start the UA-S10 control panel if GarageBand is already running.

When you want to use the UA-S10 control panel to make settings for the Super UA, close GarageBand

before you start the UA-S10 control panel.

When Using Logic

In Logic’s “Environment” screen, delete the cable.

The explanation here uses Logic Pro X as an example. The procedure might dier if you’re using a dierent

version.

1. On Logic’s [Logic Pro X] menu, click [Preferences] - [Advanced Tools].

2. In the “Preferences” window, select the [Show Advanced Tools] and [MIDI] check boxes, and

then close the window.

3. On Logic’s [Window] menu, click [Open MIDI Environment].

4. On the “Environment” screen’s Layer menu, click [All Objects] and then double-click

[Physical Input].

5. Use the “Eraser Tool” to delete the cable that extends from “Sum” to “Input Notes.”

* If you delete this cable while the UA-S10 control panel is running, no sound is produced when you

operate Logic’s “Keyboard” or “Musical Typing.” If you want to use “Keyboard” or “Musical Typing,” close

the UA-S10 control panel.

[Keyboard] From the [Window] menu, click [Show Keyboard].

[Musical Typing] From the [Window] menu, click [Show Musical Typing].

6. If you’re using an external MIDI device, use the “Pointer Tool” to connect your external MIDI

device with “Input Notes.”

For example if you’re using an A-800PRO MIDI keyboard, connect “A-PRO 1” with “Input Notes.”

Company names and product names appearing in this document are registered trademarks or trademarks of their respective

owners.

01UA-S10

Mac