TEAC PL-D1400 Owner's manual

PL-D1400

DVD HOME THEATER SYSTEM

OWNER S MANUAL

IMPORTANT!

WARRANTY INFORMATION INSIDE. PLEASE READ

FOR INQUIRIES CALL

1800 656 700

OR

WWW.TEAC.COM.AU

4

POWER

L

U

M

E

O

V

AUTO SEARCH

DOWN TUNER UP

FUNCTION

FM/AM

Page

The player has built in copyright

protection technology that

prevents copying from a DVD

disc to any media.

If a video recorder is connected to

the player, the video output image

will be distorted during recording.

DVD, CD compatible

CD-R, CD-RW capable

TV format:

PAL / NTSC color system

4:3 / 16:9 screen format select

Video output:

Composite Video output

S-Video output

Component Video(Y Pb/Cb Pr/Cr) output

Audio output:

Down-mix stereo output

Digital audio output (coaxial/optical)

Dolby Digital output

5.1 Channel output

DVD features:

Multi Subtitle select

Multi Language select

Multi Angle select

Other features:

On screen display menu

Digital zooming

Slow motion

JPEG picture view

1-2

3

4

5-7

5

6-7

8-9

8

9

10

11-15

16

17

17-18

18

19-20

Important Safety Instructions

FEATURES

CONTENTS

INTRODUCTION

About DVD

About the player

Front panel

Rear panel

Remote control

SYSTEM CONNECTION

Connecting to a TV set

Connecting to amplifier

GETTING STARTED

Play a disc

Problem disc message

Power management

ON SCREEN DISPLAY AND VFD

DVD/CD mode

FUNCTION BUTTONS

SETUP MENU

LANGUAGE

AUDIO SETUP

SCREEN SETUP

CUSTOM SETUP

TROUBLE SHOOTING

SPECIFICATIONS

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of

Dolby Laboratories. Confidential Unpublished Works.

1992-1997 Dolby Laboratories.

C

This product incorporates copyright protection technology that is

protected by method claims of certain U.S. patents and other

intellectual property rights owned by Macrovision Corporation and

other rights owners. Use of this copyright protection technology

must be authorized by Macrovision Corporation, and is intended for

home and other limited viewing uses only unless otherwise

authorized by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

1-4

10-11

16-18

FEATURES

CONTENTS

21

DVD PLAYER

POWER AMPLIFIERS

6 CH analog output

2CH to 6 CH transform

6 CH master volume control and individual

volume adjust

3-band tone control (treble,middle, bass)

3D effect

Mute function

TUNER

Selectable auto or manual station-search

function

Up to 40 registers for station- saving function

About DVD

DVD (Digital Versatile Disc) is a digital video medium

under the MPEG II format, featuring a variety of

revolutionary entertainment capabilities. The MPEG II

video compression technology provides capacity for an

excellent picture of minimum 500 lines resolution on

screen, up to 8 language soundtracks, up to 9 views

from different camera angles and up to 32 language

subtitles (provided by the DVD disc itself which supports

these features).

Select a DVD disc

Disc information

Disc types

Recording

Method

Capacity

Disc size

Horizontal

Resolution

Sub-titles

Sound tracks

Symbol

DVD

Digital / MPEG II

CD

Digital

Single-layer / Single side

4.7GB = 2 hr

Double-layers / Single side

8.5GB = 4 hr

Single-layer / Double sides

9.4GB = 4.5 hr

Double-layers / Double sides

17GB = 8 hr

12cm / 8cm

500 lines up

32

8

650MB = 74min

12cm / 8cm

-

1

DVD features symbols

2

Each DVD disc contains various features depending

on production of the disc. Below are some of the

symbols representing the features:

Number of Audio Tracks

Number of Subtitles

Angle Indicator

16 : 9

L B

Care of disc

Hold the disc with fingers. Hold the disc's outer

edge and/or the center spindle hole. Do not touch

the disc surface.

Do not bend or press the disc. Do NOT expose the

disc to direct sunlight or heating sources.

Store discs in cabinet vertically, in dry condition.

Prevent exposure to:

Direct sunlight

Heat or exhaust from a heating device.

Extreme humidity.

Clean the disc surface with a soft, dry cleaning cloth.

Wipe the disc surface gently, radically, from center

toward the outer edge.

Do not apply thinner, alcohol chemical solvent, or

sprays when cleaning. Such cleaning fluids will

permanently damage the disc surface.

The player has built in copyright

protection technology that

prevents copying from a DVD

disc to any media.

If a video recorder is connected to

the player, the video output image

will be distorted during recording.

Screen Format

Zoom

Region code

1

2

3

4

5

6

Region

Canada, USA

Europe (incl. Poland, Romania, The Czech

republic), Japan, Middle East (incl. Saudi

Arabia, Egypt, Iran, South Africa)

East Asia (incl. Hong Kong, Taiwan, South

Korea),

South-East Asia

Australia, Caribbean, Central & South

America, Mexico,

New Zealand

Africa, Former Soviet Union, India, North

Korea, Pakistan, Turkmenistan

China

DVD Region Code

DVD discs and DVD players are manufactured

under the worldwide agreed DVD Regional

Code System that the player will operate only

with corresponding disc of the same Regional

Code.

Video disc contains high-density compressed data

that needs proper handling

Some features contained in this DVD player are related to

the DVD disc's software.

Check the features printed on the disc's packing or follow

the instructions of the Disc's on screen menu.

REMARK

Some features cannot be performed if the disc does not

support the feature, or requires special settings.

++

1

INTRODUCTION

No-play disc

The following discs are NOT acceptable

by the DVD player:

DVD disc with region code that does

not match the player's region code

(Check the disc's region code printed

on the disc packing. Region code "ALL"

will be acceptable by all players.)

Some DVD discs that were purchased

outside the application country

PC application on CD-R/CD-RW

CD-ROM for PC interface only

CD-R/CD-RW of not proper format

This player is compatible to the following

disc types:

DVD

CD-DA

CD-R / CD-RW*

PICTURE CD

*NOTE: Some PC application files on CD-R or

CD-RW CANNOT be accepted by the unit,

e.g. CD-ROM under PC Windows, etc.

(CD-R / CD-RW writing format may be

different, some discs are not acceptable)

single sided / double sided

single layered / double layered

2

INTRODUCTION

3

INTRODUCTION

About the player

Front panel

Rear panel

7. Main audio output L

1. 5.1 Channel Amplifier Output

2. AM antenna

3. FM antenna Composite Video

6. External audio in

5. Component Video

8. Main audio output R

9. Coaxial Digital Audio

4. Component Video (Y.Pb /Cb.Pr/Cr)

10. S-video

11. Optical Digita l Audio

VFD display

POWER

L

U

M

E

O

V

AUTO SEARCH

DOWN TUNER UP

FUNCTION

FM/AM

5

1

2

3 4

6 7

8

9

10 11 12 13

1. Power button

2. Disc tray

3. Remote receiver windows

4. VFD display windows

5. Vol- & Vol+

7. Earphone out vol button

10. FM/AM button

8. OPEN/CLOSE button

9. FUNCTION button

11. AUTO SEARCH button 12. STOP button

13. Previous (song or tuner)

6. Earphone out jack

14. Next (song or tuner)

14

1

4

5

2

6

7 8 9 10

3

5.1CH AMP OUTPUT

SW CEN SL

FL

SR

FR

FAN

COAXIAL

R1 R2

L R

S-VIDEO

OPTICAL

Y

Pb/Cb

Pr/Cr

VIDEO

AUDIO IN

L2L1

AM

FM

~AC IN

11

: :

DVD AM FM ST.

KHz

MHz

D

Playback time of second

Playback time of minute

Playback time of hour

Current chapter or track

Play DVD disc

Amplitude modulation

Frequency modulation

Stereo

Play dolby format disc

Play dts format disc

Frequency

4

INTRODUCTION

Notes

The remote control transmits a directional infrared beam. Be sure

to aim the remote control directly at the infrared sensor during

operation. When the sensor is covered or there is a large object

between the remote control and the sensor, the sensor cannot

receive signals. The sensor may not be able to receive signals

properly when it is exposed to direct sunlight or a strong artificial

light (such as a fluorescent or strobe light). In this case, change

the direction of the light or reposition the unit to avoid direct lighting.

Some features of the player can only be performed by the remote control.

Some features described in this owner's manual are related to the disc's encoding.

Some features may not be available, if the disc encoding does not support the feature.

Remote control

1.FUNCTION button

2.POWER button

3.SUBTITLE button

4.TITLE button

5.REPEAT button

6.ZOOM button

7.PLAY button

8.STOP button

9.MENU/PBC button

10.UP button

11.DVD:LEFT button radio:FINE- button

12.Scan mode button

13.3D button

14.Program button

15.VOL+/VOL- button

16.TONE button

17.Number Keys button

18.Tuning+/- button

19.AUTO button

20.MUTE button

21.OPEN/CLOSE button

22.AUDIO button

23.ANGLE button

24.A-B button

25.Display button

26.PAUSE/STEP button

27.SLOW button

28.SETUP/MEM button

29.ENTER button

30.DVD:RIGHT button radio:FINE+ button

31.DOWN button

32.RETURN button

33.SURROUND button

34.GOTO button

35.SHIFT button

36.CLEAR button

37.CHANNEL +/- button

38.FM/AM button

22

35

38

31

37

26

21

20

34

23

24

36

28

30

33

25

27

29

32

18

2

8

4

9

6

11

12

16

14

RETURN

FM/AM

5

9

1

6

0

CLEAR

8

7

10+

2

4

3

STOP

TONE

PROG

FUNCTION

VOL

GOTO

SETUP/MEM

MENU/PBC

ENTER

MUTE

PS/IS

ZOOM

TITLE

A-BREPEAT

PAUSE/STEP

DISPLAY

AUDIO

SUBTITLE

ANGLE

TUNING- TUNING+

CH- CH+

PLAY SLOW

3D

2CH/6CH

SHIFT

AUTO

FINE+

FINE-

19

17

13

1

3

5

7

15

10

-

+

FMFM

++

--

FL

5.1CH AMP OUTPUT5.1CH AMP OUTPUT

SRSR

CECE

NN

SWSW

FRFR FLFL

SLSL

+ +

SL

CEN

(Not included)

AUDIO INAUDIO IN

L1L1

R1R1

L2L2

R2R2

VIDEOVIDEO

Pr/CrPr/Cr

Pb/CbPb/Cb

YY

OPTICALOPTICAL

S-VIDEOS-VIDEO

COAXIALCOAXIAL

RR

LL

DO NOT connect the

AC power socket to the

wall outlet before the system

connection is completed

AMAM

FANFA N

FR

SR

AC INAC IN

Most modern TV sets will have AV inputs

1

2

3

Connect ONE of the above options ONLY,

to avoid picture interference.

NOTE

.........

' Y,Pb/Cb,Pr/Cr

" " "Y Cb Cr" " " "Pb/Cb"

&"Pr/Cr"

'

Connect the player's Y,Pb/Cb,Pr/Cr, L/R to TV s &audio

L/R inputs. VIDEO OUT setup , Y is brigtness signal,

color signal,see diagram2.

About the VIDEO OUT s setup,pls,refer to SETUP MENU page17.

See diagram1.

SL

SR

NOTE

7

8

GETTING STARTED

Unpack the unit.

Read through this owner`s manual before

installation and use.

Load batteries into the remote control unit.

Connect the system, make sure the connec-

tons are secured.

Connect the power plug to the AC power outlet.

Loading batteries to the remote control

Remove the battery compartment cover.

Load two AAA (UM-4 or R03) batteries into the

battery compartment.

Make sure that the batteries have been inserted

in the correct polarities matching to the symbols+,-

marked in the battery compartment. Close the

battery compartment cover.

When replacing batteries, replace both batteries.

Do not mix new and used batteries operating

together, otherwise, the operation lifetime will be

much shorter than normal.

Remove the batteries if the unit will not be used for

a prolonged period of time.

The remote control transmits a directional infra-

red beam. Be sure to aim the remote control

directly at the infrared sensor of the unit during

operation.

If the sensor has been covered or there is a lar-

ge object between the remote control and the s-

ensor, the sensor will not respond.

The sensor may not be able to receive the remote

signal when it is exposed to direct sunlight or

a strong artificial light (fluorescent or strobe

light). In this case, change the direction of the

light or reposition the unit to avoid direct lighting.

If a DVD disc menu appears on screen

Press PLAY button on the remote

(or on the unit)to start playing.

Press the DIRECTION buttons to select

the desired feature in the menu.

And then press ENTER button to

confirm a selection in the menu.

Switch on the player

Press the main power switch on the DVD player.

Power on the TV set, and the amplifier if connected.

Set up the system

Select the corresponding setting of the TV set

(AV1, AV2, S-Video, DVD etc.).

For VCR or R F modulator connection, select the

corresponding turned channel until the DVD

screen appears.

If amplifier has been connected, select the corr-

esponding output mode.

Load a disc

Press OPEN/CLOSE button on the remote

control ( or front panel ) to eject the disc tray.

Load a disc, label side up, onto the disc tray and

press OPEN/CLOSE button.

Automatic playback

The unit will take a few seconds to load the disc`s

initial data, display the disc type logo on the left

upper corner on screen, and then start playing back

automatically.

Remote

sensor

Within approximately

7 meter

1

4

7

2

5

8

3

6

9

0

30

0

3

0

ENTERENTER

ENTER

POWER

L

U

M

E

O

V

AUTO SEARCH

DOWN TUNER UPFUNCTION

FM/AM

9

Problem disc messages

The following message will display on screen when there is a format problem with the loaded disc:

WRONG REGIONAL DISC

Region code of the disc is not matching to the player`s region code (region 1 to region 6).

WRONG PASSWORD

The rating level of the disc is higher then the rating level setting of the player.

The player will not play the disc.

WRONG DISC

The player is equipped with automatic disc quality detection software. When the player

detects a problem disc or a damaged disc, the player may keep playing the disc at lower

quality or stop playing, depending on the damaged level of the disc.

Production qualities of DVD discs vary, some discs might deviate from the industrial

standard. Some incorrectly formatted discs may playback on the player. However,

the playback and operational quality of those disc may be substandard.

Power management

If the player will not be in use for a long time, unplug the player for personal safety.

GETTING STARTED

Karaoke

Playback

Follow these steps to enjoy special Kara

oke

features.

1

Co

nn

ect

on

e

or two microp

ho

ne

s

to the front

p

anel MIC 1/2

jac

ks.

2 Insert a Karaoke

disc into the DVD

disc tray

.

3 Select the desired

chapte

r/tr

a

ck in the disc menu.

4 Adjust the microphone volume

with the front panel VOL +/- keys.

5 Adjust the micropho

ne

ech

o

with

the front

panel ECHO +/- keys.

6 Press

L/R

on the

remote

control to select the desired

singing mode: Stereo, Left, Right,

etc.

If you hear high-pitched feedback, move the microphone away

from your TV set or speakers. You can also reduce the volume

and/or echo.

10

An On Screen Display ( OSD ) indicator will be displayed at the upper part of the TV screen when certain

functions are executed, or when pressing the DISPLAY button on the remote control.

The OSD indicator is a user friendly interface designed to display the status of playback type. When a

different disc is loaded ( DVD, CD) ; the OSD indicator bar will be different.

The OSD bar will appear automatically if it is activated by pressing the

DISPLAY button. Press the DISPLAY button again and a new status bar

will appear. Press DISPLAY button a third time and the OSD bar will dis-

appear. When OSD indicator bar appears, press other button, the OSD

indicator bar will disappear automatically.

CD mode - OSD

DVD mode - OSD

1

: 1 / 2

00:02:30

: 3 / 10

Disc title

Playback time

Disc subtitle

Audio format

Chapter

Multi-audio

: 1 /3

: 1 / 30

00:02:30

: English-1/1

Off

AC3 2CH

:

2

Play status

Multi-angle

:

Scan mode

PAL

TV-system

Playback time

Current title

Disc title

Current chapter

Chapter

Disc track

Track : 3/15 00:02:30

Current track

Playback time

INTERLACE

11

FUNCTION BUTTONS

DISPLAY

Press DISPLAY button.

To show the time and status information.

Open/Close disc tray

Play/Pause/Stop

To open and close the disc tray.

Press OPEN button on the front

panel or the remote.

Press PLAY button to play the disc.

Press PAUSE button to pause(still

Picture).

Press PLAY button to resume normal

playback.

Press STOP button to stop in two modes.

a) Press STOP button Once. STOP meno-

rizes the interrupt position and the OSD

Shows prestop . Resu

me paly

by pressing PLAY button.

b) Press STOP button Twice to completely

Stop disc.the OSD shows STOP

And the resume disc.PLAY button will

Skip Forward / Backward

Press button skip advance DVD

chapter or CD track.

Press button skip backward DVD

chapter or CD track.

E

Player will not skip forward or backward during

WARNING section of a DVD disc.

Single chapter DVD or single track CD cannot

skip.

DISC TITLE / MENU

While playing a DVD.

Press the MENU button to return to

the DVD disc start menu.

Press PLAY button to resume play

from where you previously stopped

it.

While playing a DVD, press the

TITLE button return to the beginning

of the DVD disc.

to

E

Some DVD disc refuse the TITLE function.

MENU/PBC

TITLE

Fast forward/

backward

The player is muted in

this mode.

Player will not fast forward or fast backward

during WARNING section of a DVD disc.

fast forward or

fast backward

Press button to fast forward

through the disc. Repeatedly pressing

the button;

Press button to fast backward

through the disc. Repeatedly pressing

the button will increase the search speed.

Press PLAY button to resume normal

playback.

E

The player is muted in SLOW mode.

Press SLOW button to play at slow

motion. Repeatedly pressing the

button will decrease the slow speed.

Normal

FOR DVD PLAYER

12

FUNCTION BUTTON

Select an item in menu

In a DVD disc start menu or in the players setup menu.

Press DIRECTION button to

highlight

function icons.

Press ENTER button to confirm a

selection.

Press CLEAR button to cancel an

entry.

Press RETURN button returning

to the upper level menu.

ENTER

CLEAR

RETURN

Numeric Key Pad

(Random Program access)

To direct access a DVD Chapter

or a CD track, input the desired

DVD Chapter or CD Track number

using the numeric key pad.

Input data for the DVD disc start

menu or the player`s setup menu.

E

Some DVD disc`s do not allow direct

access function.

MUTE

Press MUTE button to select mute

on or mute off.

Press ENTER button to execute the search.

E

Some DVD discs do not allow Search

function. Search does not function during

program play.

A-B

REPEAT

Repeat section A-B

To repeat playback a specific section of a disc.

Press the A-B button at the starting point

of the desired section. A display

on screen.

Press the A-B button again, at the end of

the desired section, A-B display on

screen. Press play to begin playback,the

desired section will continue to repeat

until the function is cancelled.

To cancel the function. Press the A-B

button again return to normal play.

E

Some DVD discs do not allow A-B function.

Repeat

Repeatedly playback desired Title, Chapter or Track.

Press REPEAT button repeatedly to select

the repeat mode .

In DVD mode

REP.CHAPTER

REP.TITLE

REP.DISC

REP.OFF

In CD mode

REP.TRK

REP.DISC

REP.OFF

Repeat chapter

Repeat title

Repeat all disc

Repeat off

Repeat track

Repeat disc

Repeat off

E

Some DVD disc`s do not allow REPEAT function.

ENTER

GO TO

Search a desired section

To search for a desired Title, Chapter, Time or Track.

In DVD mode

pressing the GO TO button once appear

X/XX

X/X

pressing the GO TO button twice appear

X/X

XX : XX :XX

Current title

Total title

Total chapter

Current chapter

Current title

Total title

Hour

Minute

Second

6

0

8

7

10+

2

4

3

5

9

1

ENTER

13

Multi - Angle / Subtitle / Audio

While playback a DVD disc

Press ANGLE button repeatedly to select

the desired camera angle. A DVD disc may

contain up to 9 selectable camera angles.

While playback a DVD disc. Press SUBTITLE

button repeatedly to select the desired

subtitle. A DVD disc may contains up to 32

selectable subtitles.

While playing a DVD disc, Press AUDIO

button repeatedly to select the desired

audio sound track. A DVD disc may contains

up to 8 selectable audio sound tracks.

E

DVD disc start menu may contains set up of

Angle, Subtitle and Audio soundtrack selection.

You may do the selection in the disc start menu.

Volume Up / Down

SETUP

PROG

While playing a disc.

Press the VOLUME button- or +

to adjust the volume output.

Volume level will display on screen.

Volume level control do not apply to

digital audio output level when DVD

disc playing.

ZOOM

E

The picture quality is degraded as the

picture increased.

Press the SETUP button to enter the

player`s setup menu.

Setup menu is a facility for the owner

to adjust the detail setting of the player.

For the detail of Setup menu see SET

UP MENU of this instruction manual.

SETUP

PROGRAM

To program play a disc in a desired sequence.

In PBC off mode, Press PROG button,

to enter the program menu.

In DVD mode

When the program menu appears

input the Title button , press ENTER.

Then input title Chapter number,

press ENTER button. Once programming

is completed.

(PLAY) --- Press PLAY button to start

program play.

(CLEAR) --- Press CLEAR button if you

want to cancel the wrong information

you input. Press CLEAR again to cancel

all the tracks.

(PROG) --- Press PROG button to quit

the program menu.

ENTER

In CD mode

When the program menu appears, input

the Track number, press ENTER , when

the programming is completed.

FUNCTION BUTTON

ANGLE

SUBTITLE

AUDIO

PROGRAM

Title

Chapter

1.

2.

3.

4.

5.

:Select

:Play

01

02

03

04

05

01

02

03

04

05

VOLUME 79

PLAY DVD

Press the ZOOM button repeatedly

TV Screen display:

ZOOM X2--> ZOOMX 4--> ZOOM OFF

PLAY JPEG

Press the ZOOM button repeatedly

TV Screen display scale:

25%-->50%-->100%-->150%-->200%

While zoom 100%, press direction button

to rotate picture.

While zoom 150%.200%,press direction

button to move picture position.

PROG

VOL

+

-

6

0

8

7

10+

2

4

3

5

9

1

CLEAR

14

(PLAY) --- Press PLAY button to start program

play.

(STOP) --- Press STOP button twice to quit

the program mode.

(CLEAR) --- Press CLEAR button if you want

to cancel the wrong information you input

before or cancel the desired track. Press

CLEAR again to cancel all the tracks.

FUNCTION BUTTON

PROGRAM

Track

1. 02

2.

3.

4.

5.

01

02

03

04

05

:Select

:Play

E

(PLAY) --- Press PLAY button to start

program play.

(STOP) --- Press STOP button twice to quit

the program mode.

(CLEAR) --- Press CLEAR button if you want

to cancel the wrong information you input

before or cancel the desired track. Press

CLEAR again to cancel all the files.

CLEAR

CUSTOM SETUP

2CH/6CH

Press FUNCTION button.

Now you can enjoy the famous “Dolby AC

-3 Audio” at any time even though you are

playing a disc with only 2CH audio.

Because you can switch common 2CH

audio into Dolby 5.1 CH by using 2CH/6CH

button. Then the VFD and TV will display

“5.1CH” accordingly.

TONE

You can adjust the tone of master 5.1CH audio

output. By pressing the TONE key, you can adjust

the bass, middle, treble separately.

3D

3D effect is specially useful to 2CH playing back,

which makes better sound field effects. So when

you select 2CH playing back, press 3D button to

turn on the 3D effect and try making a contrast

with 3D-off playing back.

NOTE

But for real “Dolby AC-3 Audio”, the audio output is

by passed through the “2CH/6CH switching IC”.

SHIFT

By pressing SHIFT key, you can not only

change the main volume of 5.1CH, but

also adjust the volume of a single channel

in 5.1CH separately. You can even switch

off “Center”, “Rear” or “Subwoofer”

separately by using the SETUP/MEM key

if you want.

a) For 5.1CH main volume changing, the TV will display

“Master Vol”, and the VFD will display “MR” accordingly.

The changing ranges from -79 dB to 0 dB, 1dB / step.

POWER AMPLIFIERS

NOTE

A) For tone adjusting, the TV will display “Bass Vol”,

“Middle Vol”, “Treble Vol”,and the VFD will display “BA”,

“MI”, “TR” accordingly. The adjusting ranges from -14

dB to 14 dB, 2dB / step.

In MP3 mode

When the program menu appears, Press

button to highlight the desired file ,into the file

then press direction button to choose you

desired music. If you select ,press the

programming is completed.

the

PROGRAM MODE

00:03:37

1

2

3

4

5

6

7

001

002

003

004

005

006

ROOT

cd 01

cd 02

cd 03

cd 04

cd 05

cd 06

1

2

3

4

5

6

NOTE

b) For single channel volume adjusting, the TV will display

“Main-L Vol”,“Main-R Vol”,“Center Vol”,“Surr-L Vol” ,

“Surr-R Vol”,“Subwoof Vol”, and the VFD will display

“FL”,“FR”, “CE”, “SL”, “SR”, “SW” accordingly. The

adjusting ranges from -15 to 0 dB, 1dB / step.

CLEAR

ENTER

Some DVD disc do not allow programsetting.

Single track disc cannot be programmed.

E

15

TUNER

FUNCTON

Press FUNCTION button.

The button is used to switch between

DVD mode, AV mode, and TUNE mode.

E

When in TUNE mode, you can search

stations automatically or manually,

then save the channels if necessary.

FM/AM

The FM/AM button is used to switch between

FM band and AM.For FM station,afrequency

range of 87.50 MHz~108.00 MHz is provided.

So when switched to FM station, the VFD will

display 87.5MHz first. The frequency of AM

ranges from 522 KHz to 1620 KHz.So when

switched to AM,the VFD will display 522 KHz

first.

TUNING- TUNING+

Press TUNING- and TUNING+ button to

a search a station once,when a broa-

station searched,the player will

begin to broascast. Then you can

you d love to. TUNING+ is used

towards higher frequency band.

TUNING- goes toward the

“”“ ”

auto

dcasting

stop and

save it if “”

to search

And the“”

opposite side.

AUTO

Press the AUTO button to search all available

radio stations.When a station is found it will

be automatically saved.This will continue

until all the available stations have been

memorised.

E

During auto-searching,most buttons on

the remote control will stop the auto tuning.

ENTER

FINE-

FINE+

The FINE- and FINE+ button is used to

manually search a station, the step is

50 Khz for FM band, and 9 KHz for AM.

FINE+key is used to manually search

towards higher frequency range. And

FINE- used towards lower freuency

range.

“”

SETUP/MEM

To save a channel, press SETUP/MEM

first,now the VFD will display MEM ,

then input a register number that you

to save the station to,Pressing

SETUP/MEM key a second time will

save the current station to the register

you appointed.

“”

want

the

E

There are 40 preset memory stations

available,20 FM and 20 AM.

CH- CH+

By using CH- and CH+ key or directly

input the number you have saved a

station to ,you can select a specific

station you like.

For a empty station, the default frequency

is 87.5MHz for FM, and 552 KHz for AM.

FUNCTION BUTTON

’

16

SETUP MENU

SETUP

LANGUAGE SETUP

Default setting

In STOP mode, press SETUP button

highlight Language.

Press UP/DOWN button

Press ENTER button , the screen displays sub-

menu.

Press UP/DOWN button to highlight the desired

item in the LANGUAGE.

SETUP

Menu

Select the players OSD .

Press to confirm the selection.

Press SETUP button to quit.

OSD ENGLISH

ITALIAN

ENTER

Language Setup

OSD

Menu

Audio

Subtitle

: Move :select SETUP:Quit

Various features of the player can be adjusted in the

SETUP menu:

1 Press SETUP button

SETUP menu appears.

2 Press the UP/DOWN button

to highlight the desired menu.

SETUP/MEM

SETUP MENU

1

MEM/PBC

SETUP/MEM

PS/IS

RETURN

FINE- FINE+

PROG

TONE

3D

VOL

2CH/6CH

GO TO

SHIFT

ENTER

E

Do not move any bar to select item, please

make sure the mode is in stop mode.

Language Setup

OSD

Menu

Audio

Subtitle

: Move :select SETUP:Quit

ENGLISH

Press to confirm your selected item.

ENGLISH

CHINESE

JAPANESE

FRENCH

GERMAN

LANGUAGE SETUP (continued)

SETUP

Select the disc language setting.

Press to confirm the selection.

Press SETUP button to quit.

ENTER

Default setting

ENGLISH

CHINESE

JAPANESE

FRENCH

GERMAN

ITALIAN

SPANISH

PORTUGUESE

HINDI

THAI

RUSSIAN

KOREAN

OTHERS

Language Setup

OSD

Menu

Audio

Subtitle

: Move :select SETUP:Quit

ENGLISH

CHINESE

JAPANESE

FRENCH

GERMAN

ENGLISH

FRENCH

GERMAN

ITALIAN

SPANISH

GERMAN

SPANISH

FRENCH

Page is loading ...

TEAC PL-D1400 Owner's manual

TEAC PL-D1400 Owner's manual

Related papers

Other documents