Page 2
SKU 92989
For technical questions, please call 1-800-444-3353
Specifications
Item Description
Table Material Fir Wood with galvanized hardware
Overall Dimensions 39.3 (L) x 18.8 (W) x 61.3 (H) inches
Bottom Shelve Dimensions 34.25 (L) x 10 (W) inches
Shelve Dimensions 37.75 (L) x 3.75 (W) x ¾ (H) inches
Table Top Dimensions 39-1/4 (L) x 17 (W) inches; 34 inches from floor
Basin Dimensions 12 (L) x 9-1/4 (W) x 2 (D) inches
Table Weight Capacity 80 lbs.
Overall Weight 35 lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords. Do not allow children to sit, stand or
play on or around the Potting Table.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
6. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
7. Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines.
8. Install this product on a proper surface. Locate on a flat, level, and solid surface
that is capable of supporting the weight of the Table and its 80 lbs. load capacity.