SimPal-G4
Security Camera
User Manual
Manual version 2.2
APP Management and Settings
SimPal-G4
SimPal-G4 Security Camera User Manual
SimPal-G4 security Camera
SimPal-G4 camera is a remote image-capturing device, schedule send
images to your e-mail. With built-in PIR detector, connecting 16pcs
wireless sensor, once motion detected or sensor trigger, auto sending
images to your e-mail.
Stand alone working camera, sending images to e-mail via WiFi network.
Even WiFi no available, it can sending images via GPRS/HSDPA/UMTS
by install GSM SIM card on camera. SMS, voice calling support when SIM
card installed.
Details of the function and advanced operation of this camera are
described in this instruction manual.
2
SimPal-G4 Security Camera User Manual
CHAPTER 1 STRUCTURE INSTRUCTION ...................................................................... 4
1.1 Package contents ....................................................... 4
1.2 Products instructions ................................................. 4
1.3 Light indicator and Beeper ........................................ 5
CHAPTER 2 INSTALLATION ............................................................................................ 6
2.1 Accessories installation ............................................. 6
2.2 The power adapter and battery ................................. 6
2.3 Install mounting bracket ............................................ 8
CHAPTER 3 START TO USE CAMERA .......................................................................... 9
3.1 Power on/ off ............................................................... 9
3.2 Set phone number and receiver e-mail address ...... 9
3.3 Set WiFi and GRPS network .................................... 10
3.4 Adjust camera date time ........................................... 11
3
SimPal-G4 Security Camera User Manual
3.5 Capture images to e-mail ......................................... 12
3.6 Schedule send images ............................................. 12
3.7 Motion detection alarm ............................................ 13
3.7 Pairing remote control .............................................. 14
3.8 Pairing wireless sensors .......................................... 15
CHAPTER 4 ADVANCED SETTINGS ............................................................................ 17
4.1 Voice call alert ........................................................... 17
4.2 Configure sender e-mail ........................................... 17
4.3 Temperature alarm .................................................... 18
4.4 LED status indicator ................................................. 19
4.5 Night vision LED lights ............................................. 19
4.6 Reset to factory settings .......................................... 20
CHAPTER 5 MAIN TECHNICAL PARAMETERS .......................................................... 21
4
SimPal-G4 Security Camera User Manual
1. First time use, need to install SIM card to set WiFi and e-mail
account.
2. After set WiFi and e-mail, it can remove SIM card, camera only
working at WiFi network. Auto sending images e-mail when
motion detected or schedule send images e-mail according
settings.
3. SMS and voice calling alarm support by install SIM card, the
operator will charge for SMS and voice calling service.
5
SimPal-G4 Security Camera User Manual
4. This product is a wireless signal transmission device. Keep it
away from area which no allow wireless signals.
Chapter 1 Structure instruction
1.1 Package contents
Camera main unit
1 unit Power adapter(12V/1A)
1 pcs GSM antenna
1 pcs Temperature sensor
1 pcs
6
SimPal-G4 Security Camera User Manual
User manual
1 pcs Mounting bracket
1 set Remote control
1.2 Products instructions
7
SimPal-G4 Security Camera User Manual
8
SimPal-G4 Security Camera User Manual
9
SimPal-G4 Security Camera User Manual
Figure 1: SimPal camera instructions
Tip: Keep the camera lens clean to insure best imaging quality.
10
SimPal-G4 Security Camera User Manual
1.3 Light indicator and Beeper
Color Action Status
Red
Flash slowly Searching the network.
Flash quickly Sensor alarm or PIR alarm.
Constant Light Can not register GSM or WiFi network, or the remote
camera damaged.
Green
Constant Light Armed status.
Flash twice per
2 seconds Alarm-suspension status
Flash slowly Disarm status.
Flash quickly Sending SMS or e-mail
Light 2 seconds Successfully reset factory setting
Red and
Green Two color lights
alternately Loading sensor or Pairing remote control
Note: Slow flash 1 time per second, quick flash 2 times per second.
Beeper Status
11
SimPal-G4 Security Camera User Manual
Long beep (2 seconds) Register GSM or WiFi network success
Short beep
Enter sensor loading mode
Enter remote control pairing mode
Sensor pair success
Remote control pair success
Arm by remote control
Short beep twice Disarm by remote control
Short beep three times
Sensor already paired
Remote control already pared
Sensor reach max quantity 16pcs
Remote control reach max quantity 5pcs
12
SimPal-G4 Security Camera User Manual
Chapter 2 Installation
2.1 Accessories installation
Installing the antenna
Mount the supplied antenna into the Antenna Connector on the camera.
13
SimPal-G4 Security Camera User Manual
Installing the SIM card
14
SimPal-G4 Security Camera User Manual
15
SimPal-G4 Security Camera User Manual
Remove the Battery Compartment Cover from the rare of camera and a SIM
card holder will be found.
Open the SIM card holder.
Insert the SIM card carefully into the card holder. Make sure that the golden
connectors on the card are facing downwards.
Close the SIM card holder.
Mount the Battery Compartment Cover
2.2 The power adapter and battery
Connecting to the power adapter
16
SimPal-G4 Security Camera User Manual
Plug power connector to camera DC power interface and connect the adapter
17
SimPal-G4 Security Camera User Manual
to an AC power.
built-in rechargeable Lithium battery
18
SimPal-G4 Security Camera User Manual
2.3 Install mounting bracket
The camera has a bottom bracket
by
19
SimPal-G4 Security Camera User Manual
which it can stand on the table.
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
