Garmin GNC 255B User manual

GNC 255A/255B

Pilot’s Guide

This manual reﬂects the operation of System Software version 2.00, or later. Some differences in operation

may be observed when comparing the information in this manual to later software versions.

Garmin International, Inc., 1200 East 151st Street, Olathe, KS 66062, U.S.A.

Tel: 913/397.8200 Fax: 913/397.8282

Garmin AT, Inc., 2345 Turner Road SE, Salem, OR 97302, U.S.A.

Tel: 503/391.3411 Fax 503/364.2138

Garmin (Europe) Ltd., Liberty House, Bulls Copse Road, Hounsdown Business Park, Southampton,

SO40 9RB, U.K.

Tel. +44 (0) 870 850 1243 Fax +44 (0) 238 052 4004

Garmin Corporation, No. 68, Zhangshu 2nd Road, Xizhi Dist., New Taipei City 221, Taiwan (R.O.C.)

Tel: 886/02.2642.9199 Fax: 886/02.2642.9099

Garmin Singapore Pte. Ltd., 46 East Coast Road, #05-06 Eastgate, Singapore 428766

Tel : (65) 63480378 Fax : ( 65 ) 63480278

At Garmin, we value your opinion. For comments about this guide, please e-mail:

Techpubs[email protected]

www.garmin.com

https://ﬂy.garmin.com/ﬂy-garmin

Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted,

disseminated, downloaded or stored in any storage medium, for any purpose without the express written

permission of Garmin. Garmin hereby grants permission to download a single copy of this manual and of

any revision to this manual onto a hard drive or other electronic storage medium to be viewed for personal

use, provided that such electronic or printed copy of this manual or revision must contain the complete text

of this copyright notice and provided further that any unauthorized commercial distribution of this manual

or any revision hereto is strictly prohibited.

This part shall comply with Garmin Banned and Restricted Substances document, 001-00211-00.

Garmin

®

is a registered trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used

without the express permission of Garmin.

November 2012 Printed in the U.S.A.

i190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

LIMITED WARRANTY

All Garmin avionics products are warranted to be free from defects in materials or workmanship for:

two years from the date of purchase for new Remote-Mount and Panel-Mount products; one year

from the date of purchase for new portable products and any purchased newly-overhauled products;

six months for newly-overhauled products exchanged through a Garmin Authorized Service Center;

and 90 days for factory repaired or newly-overhauled products exchanged at Garmin in lieu of repair.

Within the applicable period, Garmin will, at its sole option, repair or replace any components that

fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts

or labor, provided that the customer shall be responsible for any transportation cost. This warranty

does not apply to: (i) cosmetic damage, such as scratches, nicks and dents; (ii) consumable parts,

such as batteries, unless product damage has occurred due to a defect in materials or workmanship;

(iii) damage caused by accident, abuse, misuse, water, ﬂood, ﬁre, or other acts of nature or external

causes; (iv) damage caused by service performed by anyone who is not an authorized service

provider of Garmin; or (v) damage to a product that has been modiﬁed or altered without the written

permission of Garmin. In addition, Garmin reserves the right to refuse warranty claims against

products or services that are obtained and/or used in contravention of the laws of any country.

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER

WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING

UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY

VARY FROM STATE TO STATE.

IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL

DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE OR INABILITY TO USE THE PRODUCT OR

FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

Garmin retains the exclusive right to repair or replace (with a new or newly-overhauled replacement

product) the product or software or offer a full refund of the purchase price at its sole discretion.

SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.

Online Auction Purchases: Products purchased through online auctions are not eligible for

warranty coverage. Online auction conﬁrmations are not accepted for warranty veriﬁcation. To obtain

warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin

will not replace missing components from any package purchased through an online auction.

International Purchases: A separate warranty may be provided by international distributors for

devices purchased outside the United States depending on the country. If applicable, this warranty is

provided by the local in-country distributor and this distributor provides local service for your device.

Distributor warranties are only valid in the area of intended distribution. Devices purchased in the

United States or Canada must be returned to the Garmin service center in the United Kingdom, the

United States, Canada, or Taiwan for service.

To obtain warranty service, contact your local Garmin Authorized Service Center. For assistance in

locating a Service Center near you, visit the Garmin web site at http://www.garmin.com or contact

Garmin Customer Service at 866-739-5687.

ii

Garmin GNC 255A/255B Pilot’s Guide

190-01182-01 Rev. A

WARNING: For safety reasons, GNC 255 operational procedures must be

learned on the ground.

CAUTION: The Garmin GNC 255 does not contain any user-serviceable

parts. Repairs should only be made by an authorized Garmin service center.

Unauthorized repairs or modiﬁcations could void both the warranty and

the pilot’s authority to operate this device under FAA/FCC regulations.

CAUTION: The GNC 255 display uses a lens coated with a special anti-

reﬂective coating that is very sensitive to skin oils, waxes, and abrasive

cleaners. CLEANERS CONTAINING AMMONIA WILL HARM THE ANTI-

REFLECTIVE COATING. It is very important to clean the lens using a clean,

lint-free cloth and an eyeglass lens cleaner that is speciﬁed as safe for

anti-reﬂective coatings.

NOTE: Garmin recommends that if ﬂying in a region with 8.33 kHz COM

channel spacing, the radio should remain in 8.33 kHz mode. This will prevent

the loss of stored user and recent frequencies.

NOTE: Do not use outdated database information. Databases used in the

system must be updated regularly in order to ensure that the information

remains current. Pilots using an outdated database do so entirely at their

own risk.

NOTE: All visual depictions contained within this document, including

screen images of the GNC 255 bezel and displays, are subject to change

and may not reﬂect the most current GNC 255 software. Depictions of

equipment may differ slightly from the actual equipment.

NOTE: This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

NOTE: This product, its packaging, and its components contain chemicals

known to the State of California to cause cancer, birth defects, or

reproductive harm. This notice is being provided in accordance with

California’s Proposition 65. If you have any questions or would like

additional information, please refer to our web site at www.garmin.com/

prop65.

iii190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

NOTE: Canadian installations: In accordance with Canadian Radio

Speciﬁcations Standard 102 (RSS 102), RF ﬁeld strength exposure to

persons from an antenna connected to this device should be limited to 60

V/m for controlled environment and 28 V/m for uncontrolled environment.

iv

Garmin GNC 255A/255B Pilot’s Guide

190-01182-01 Rev. A

NOTE: This device complies with Part 15 of

the FCC limits for Class B digital devices. This

equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. Furthermore, there is no

guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful

interference, the user is encouraged to try

to correct the interference by relocating the

equipment or connecting the equipment to a

different circuit than the affected equipment.

Consult an authorized dealer or other qualiﬁed

avionics technician for additional help if these

remedies do not correct the problem.

Operation of this device is subject to the

following conditions: (1) This device may

not cause harmful interference, and (2) this

device must accept any interference received,

including interference that may cause undesired

operation.

To obtain accessories for your unit, please

contact your Garmin dealer.

Help us better support you by completing our

on-line registration form today! Registration

ensures that you will be notiﬁed of product

updates and new products and provides lost

or stolen unit tracking. Please, have the serial

number of your unit handy, connect to our

web site (www.garmin.com) and look for our

Product Registration link on the Home page.

The display surface is coated with a special

anti-reﬂective coating which is very sensitive to

skin oils, waxes and abrasive cleaners. It is very

important to clean the lens using an eyeglass

lens cleaner which is speciﬁed as safe for anti-

reﬂective coatings and a clean, lint-free cloth.

v190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

Product Registration and Support

Help us better support you by completing your online registration today!

Have the serial number of your product handy and connect to the Garmin

web site (www.garmin.com or https://ﬂy.garmin.com/ﬂy-garmin). Look for the

Product Registration link on the Home page. Also, be sure to record your serial

number in the space provided.

If you have any questions, the Garmin Product Support department may be

reached Monday through Friday, 7:00 AM to 7:00 PM Central Time.

US: 913-397-8200

US Toll Free: 1-866-739-5687

Canada Toll Free: 1-866-429-9296

vi

Garmin GNC 255A/255B Pilot’s Guide

190-01182-01 Rev. A

Record of Revisions

Part Number Revision Date Description

190-01182-01 A 11/19/12 Initial release

vii190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

Contents

Product Registration and Support ......................................................................v

1 Getting Started ....................................................................................1-1

1.1 Product Description ..............................................................................1-1

1.2 Pilot Controls .......................................................................................1-2

1.2.1 Power/Com Volume/Squelch Knob .........................................1-2

1.2.2 Nav Volume/ID Knob .............................................................1-2

1.2.3 Tuning LARGE/SMALL Concentric (Cursor) Knobs ................... 1-3

1.2.4 FLIP/FLOP Key ....................................................................... 1-3

1.2.5 C/N (Com/Nav) Key ............................................................... 1-3

1.2.6 OBS Key ................................................................................ 1-3

1.2.7 T/F (To/From) Key ...................................................................1-3

1.2.8 CLR (Clear) Key ..................................................................... 1-3

1.2.9 ENT (Enter) Key ..................................................................... 1-3

1.2.10 FUNC (Function) Key.............................................................. 1-4

1.2.11 MON (Monitor) Key ............................................................... 1-4

1.3 USB Port .............................................................................................. 1-4

2 Basic Operation ....................................................................................2-1

2.1 Power On ............................................................................................ 2-1

2.2 Com Radio ..........................................................................................2-1

2.2.1 Selecting a Com Frequency .................................................... 2-1

2.2.2 Monitoring the Standby Com Channel ...................................2-2

2.2.3 Saving a Com Channel ..........................................................2-2

2.2.4 Com Database Look-Up .........................................................2-4

2.2.5 Frequency Database Reverse Look-Up .................................... 2-4

2.2.6 Emergency Channel ...............................................................2-5

2.2.7 Stuck Mic .............................................................................. 2-5

2.2.8 Remote Frequency Selection Control ...................................... 2-5

2.3 Nav Radio ...........................................................................................2-6

2.3.1 Selecting a Nav Frequency ..................................................... 2-6

2.3.2 Saving a Nav Channel ...........................................................2-6

2.3.3 Listening to the Nav Audio Channel ....................................... 2-7

2.4 OBS Mode ........................................................................................... 2-8

2.5 Distance/Speed/Time (DST) Display ....................................................... 2-9

viii

Garmin GNC 255A/255B Pilot’s Guide

190-01182-01 Rev. A

3 Functions ..............................................................................................3-1

3.1 Functions Description ...........................................................................3-1

3.2 Com Frequencies ................................................................................. 3-2

3.2.1 Recent Com Frequencies ........................................................ 3-2

3.2.2 Com User Frequencies ........................................................... 3-3

3.2.2.1 Viewing the Com User Frequency ...........................................3-3

3.2.2.2 Deleting the Com User Frequency .......................................... 3-3

3.2.2.3 Editing a Com User Frequency ............................................... 3-4

3.2.3 Com Database Frequencies .................................................... 3-5

3.2.4 Com Nearest Airports (APT) ................................................... 3-6

3.2.5 Com Nearest Area Control Center (ACC) Frequencies ............. 3-7

3.2.6 Com Nearest Flight Service Station (FSS) Frequencies ............. 3-8

3.2.7 Com Nearest Weather (WX) Frequencies ................................ 3-9

3.3 Nav Frequencies ................................................................................ 3-10

3.3.1 Recent Nav Frequencies ....................................................... 3-10

3.3.2 Nav User Frequencies .......................................................... 3-11

3.3.2.1 Viewing the Nav User Frequency ..........................................3-11

3.3.2.2 Deleting the Nav User Frequency ......................................... 3-11

3.3.2.3 Editing a Nav User Frequency .............................................. 3-12

3.3.3 Nav Database Frequencies ................................................... 3-13

3.3.4 Nav Nearest VOR .................................................................3-14

3.4 ICS Conﬁguration ..............................................................................3-15

3.4.1 Adjust Intercom ...................................................................3-15

3.4.2 Aux Audio ........................................................................... 3-16

3.4.3 Intercom On/Off ..................................................................3-17

3.4.4 Speaker On/Off .................................................................... 3-17

3.5 System Conﬁguration .........................................................................3-18

3.5.1 Com Spacing .......................................................................3-18

3.5.2 Display Brightness ............................................................... 3-19

3.5.3 Display Contrast .................................................................. 3-20

3.5.4 Database Info ......................................................................3-20

3.5.5 Load Database ....................................................................3-21

3.5.6 Software Version .................................................................3-22

3.5.7 Serial Number .....................................................................3-22

3.6 Timers ............................................................................................... 3-23

3.6.1 Setting Up the Count Down Timer ........................................ 3-23

3.6.2 Setting Up the Count Up Timer ............................................ 3-24

ix190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

3.6.3 Viewing Timers in the Com Display .......................................3-24

4 Appendix ..............................................................................................4-1

4.1 Troubleshooting ................................................................................... 4-1

4.2 Updating the Frequency Database ........................................................ 4-3

4.2.1 Downloading the Frequency Database ................................... 4-3

4.2.2 Updating the GNC 255 Frequency Database .......................... 4-3

4.3 Messages ............................................................................................4-4

Index ..................................................................................................... Index-1

x

Garmin GNC 255A/255B Pilot’s Guide

190-01182-01 Rev. A

This page intentionally left blank

1-1190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

1 GETTING STARTED

1.1 Product Description

Combining a powerful VHF communications transceiver with 200 channel

VOR, Localizer and Glideslope receivers, the GNC 255 provides a full-functioned

navigation and communications solution in a small footprint at a very affordable

price. Besides traditional Nav/Com features, the GNC 255 also incorporates

workload-reducing functions such as automatic decoding of the Morse code

station identiﬁer for VOR/LOC, most-used frequency storage in memory, built-

in course deviation indicator, and more.

The GNC 255 has the ability to monitor the standby Com frequencies. The

GNC 255’s Com radio operates in the aviation voice band, from 118.000 to

136.975 MHz, in 25 kHz steps (default). For European operations, a Com

radio conﬁguration of 8.33 kHz steps is also available. The GNC 255 VHF Nav

receiver operates from 108 MHz to 117.95 MHz decoding both the VHF Omni

Range and Localizer navigation signals. The built-in Glideslope receiver will

automatically tune the corresponding glideslope paired frequencies (328 MHz

to 335 MHz) when the localizer is tuned. The GNC 255 is available in 10 and 16

watt com transmitter versions. The GNC 255A is available with a 10 watt com

transmitter. The GNC 255B is available with a 16 watt com transmitter.

Power On/Off,

Com Volume,

Squelch On/Off

Photo Sensor

USB Port

Locking

Screw

Nav (VLOC)

Volume, Nav ID

On/Off

LARGE and

SMALL Knobs

(Frequency

Adjust)

Frequency

Monitor Key

Frequency Transfer

(FLIP/FLOP) Key

Com or Nav

Frequency Selection

OBS Selection

To/From Selection

Enter Key

Clear Data Key

Function Selection

Figure 1-1 GNC 255 Front Panel Description

1-2

Garmin GNC 255A/255B Pilot’s Guide

190-01182-01 Rev. A

1.2 Pilot Controls

The GNC 255 controls have been designed to simplify operation of the

system and minimize workload and the time required to access sophisticated

functionality. Controls are comprised of dual concentric knobs for frequency

tuning, Com volume/squelch knob, Nav volume/ID knob, and bezel keys.

1.2.1 Power/Com Volume/Squelch Knob

The Power/Com Volume/Squelch knob located in the top left

corner of the bezel controls audio volume for the Com radio.

Rotating the knob clockwise past the detent turns power on

and counter-clockwise turns power off. When the Com radio is

active, press the Power/Com Volume/Squelch knob to toggle

automatic squelch control On/Off for the Com radio.

Squelch, TX, or RX

Annunciator

Com Volume Bar Graph

Active Frequency

Annunciator

Com Mode

Annunciator

Active Nav

Frequency

Standby Frequency

Annunciator

Figure 1-2 Com Volume and Squelch Display Description

The Com radio features an automatic squelch to reject many localized noise

sources. You may override the squelch function by pressing the

Power/Com

Volume/Squelch

knob. This facilitates listening to a distant station or setting

the desired volume level.

To override the automatic squelch, press the

Power/Com Volume/Squelch

knob momentarily. Press the

Power/Com Volume/Squelch

knob again to

return to automatic squelch operation. A “SQ” indication appears to the left of

the active Com frequency window in the upper left corner of the display when

automatic squelch is overridden.

1.2.2 Nav Volume/ID Knob

The Nav Volume/ID knob located in the bottom left corner

of the bezel controls audio volume for the Nav radio. Press the

Nav Volume/ID knob and the Morse code tones will be heard.

When Morse code tone is active, “ID” will appear to the left of

the Nav active frequency.

1-3190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

1.2.3 Tuning LARGE/SMALL Concentric (Cursor)

Knobs

The LARGE right and

SMALL right

knobs are used for tuning

frequencies and data entry.

SMALL, Inner Knob

LARGE, Outer Knob

1.2.4 FLIP/FLOP Key

Press and release the FLIP/FLOP key to switch between the

active (left-most) and standby (right-most) frequency. Switching

between Com frequencies is disabled while you are transmitting.

1.2.5 C/N (Com/Nav) Key

Press the C/N key to select the Com or Nav (VLOC) radio

mode.

1.2.6 OBS Key

Press the OBS key to see the current OBS setting and graphic

CDI. The OBS page will be disabled if the unit is installed with

an external converter.

1.2.7 T/F (To/From) Key

Press the T/F key to toggle between the bearing TO or radial

FROM the active VOR. The T/F page also shows Distance/Speed/

Time information. The T/F key does not operate for Localizer

frequencies.

1.2.8 CLR (Clear) Key

Pressing the CLR key erases information, cancels entries, and

resets timers.

1.2.9 ENT (Enter) Key

Press the ENT key to save selected values, to conﬁrm a prompt,

or to save the Standby frequency.

1-4

Garmin GNC 255A/255B Pilot’s Guide

190-01182-01 Rev. A

1.2.10 FUNC (Function) Key

The FUNC (Function) key accesses function categories for the

following: the Com Radio, Nav Radio, ICS Conﬁguration, System

Conﬁguration, and Timer. Pressing the FUNC key once displays

the Function mode. Pressing the FUNC key a second time exits

the Function mode.

1.2.11 MON (Monitor) Key

The MON (Monitor) key will engage the monitor function where

the Standby frequency may be monitored while still listening to

the Active frequency.

1.3 USB Port

The USB port is used to update the frequency database in the GNC 255.

NOTE: Garmin recommends the use of a USB 2.0 compatible USB ﬂash

drive for updating the database.

2-1190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

2 BASIC OPERATION

2.1 Power On

Turn the GNC 255 on by either turning the Power/Com Volume/

Squelch knob clockwise to turn the power on or, if installed,

turning on the master switch that powers the radios.

2.2 Com Radio

2.2.1 Selecting a Com Frequency

New frequencies are ﬁrst selected as a Standby frequency and then toggled to

the Active side with the

FLIP/FLOP

key. While viewing the Standby frequency

display, use the LARGE and SMALL knobs on the right side of the GNC 255 to

select the desired frequency.

1. Press C/N, if necessary, to reach the Com radio function. The

COM annunciator on the top line of the display will show.

2. Turn the LARGE knob to change the values in one MHz

increments. The MHz selection range is between 118 and 136

in one MHz steps.

3. Turn the SMALL knob to change the values in 25 kHz or 8.33

kHz increments. The kHz selection range is between 000 and

975 kHz in 25 kHz steps or 000 and 990 kHz in 8.33 kHz steps.

4. Turn the LARGE and SMALL knobs clockwise to increase and

counterclockwise to decrease the frequency values. Standby

frequency selection is not inhibited during transmit.

5. When connected to a position source, nearby station identiﬁers

will be shown for the selected frequency. Frequencies with

multiple types will have an asterisk next to the identiﬁer.

Asterisk Indicates Multiple Types

Exist For The Selected Frequency

Identiﬁer and Type Shown For

The Selected Frequency

Figure 2-1 Com Frequency Selection

6. Press and release the FLIP/FLOP key to toggle the Standby

frequency to the Active frequency.

2-2

Garmin GNC 255A/255B Pilot’s Guide

190-01182-01 Rev. A

2.2.2 Monitoring the Standby Com Channel

The Frequency Monitoring function allows you to monitor the Standby

frequency for activity, while listening to the Active frequency.

Press the MON key in the Com function to listen to the standby

frequency. A small “MN” will replace the “STB” to the left of the

Standby frequency.

Monitor

Annunciation

Standby

Frequency Being

Monitored

Figure 2-2 Com Frequency Monitor Annunciation

When the Active frequency receives a signal, the unit will switch automatically

to the Active frequency. The Active frequency quality is not affected. The

Frequency Monitor function is turned off by pressing the MON key again.

Monitoring is not canceled by switching to Nav mode.

2.2.3 Saving a Com Channel

The current Standby frequency may be saved into the Com User Frequency

database from the Com display or the Com User Function. The Com User

Frequency database can hold up to 15 frequencies.

NOTE: When switching from 8.33 kHz to 25 kHz mode, any 8.33 kHz-

speciﬁc user frequencies will be deleted from the user frequency list. This

only affects the user frequencies within the 8.33 kHz spectrum.

1. Press ENT. The Standby frequency is selected and the Waypoint

name ﬁeld will be active.

2. Turn the SMALL knob to select characters.

3. Turn the LARGE knob to move the cursor.

Turn LARGE Knob

To Move Cursor

Turn SMALL Knob

To Select Character

Press the ENT Key to Save

the Displayed Value

Press the CLR Key To Revert

to the Previous Value

Number of

Frequencies Saved

Figure 2-3 Com User Frequency Name Selection

4. After selecting the desired characters, press ENT.

2-3190-01182-01 Rev. A

Garmin GNC 255A/255B Pilot’s Guide

5. Turn the LARGE knob to select the waypoint Type.

6. Turn the SMALL knob to select the Type from the list.

Selected Wpt Type

Figure 2-4 Com User Frequency Type Selection

Frequency Type Symbol Description

TWR Tower

GND Ground

ATIS Automatic Terminal Information Service

AWS Automated Weather Observing System

ATF Aerodrome Trafﬁc Frequency

ARR Arrival

APPR Approach

DEP Departure

CLR Clearance

CTAF Common Trafﬁc Advisory Frequency

FSS Flight Service Station

RFS Remote Flight Service Station

MF Mandatory Frequency

UNI Unicom

Blank None

Table 2-1 - Com Frequency Type List

7. After making a selection, press ENT.

2-4

Garmin GNC 255A/255B Pilot’s Guide

190-01182-01 Rev. A

2.2.4 Com Database Look-Up

1. Press the CURSOR knob from the Com display to activate the

database look-up function.

Identiﬁer Field Active

for Selection

Turn LARGE Knob

To Move Cursor

Turn SMALL Knob

To Select Character

Figure 2-5 Database Identiﬁer Active for Selection

2. Turn the SMALL knob to select characters and turn the LARGE

knob to move the cursor.

Selected Identiﬁer

Figure 2-6 Database Identiﬁer Selection

3. After selecting the desired characters, press ENT. Turn the

SMALL knob to scroll through the list of waypoint types.

Waypoint Types with a “+” sign will have more frequencies

for the same type. After selection, the selected waypoint and

type will be remembered for 30 minutes.

Turn the SMALL Knob To

Select Frequency Type

Figure 2-7 Database Waypoint Type Selection

4. Press ENT to copy the frequency into the Standby frequency

location. Press and release the FLIP/FLOP key to swap the

Active and Standby frequencies.

2.2.5 Frequency Database Reverse Look-Up

The identiﬁer and frequency type will be shown for Com and Nav frequencies

that are in the database when the unit is receiving a valid position input.

Waypoint Types with a “+” sign will have more frequencies for the same type.

Airport Identiﬁer Shown

For Freqs In Database

Figure 2-8 Frequency Database Reverse Look-Up

Page is loading ...

Garmin GNC 255B User manual

This manual is also suitable for

Garmin GNC 255B User manual

Related papers

Other documents