RackBuddy Logan Operating instructions

Brand
RackBuddy
Model
Logan
Type
Operating instructions
LOGAN
INSTRUCTIONS
Pipe will be around 1 to 2cm shorter than distance between
walls. One thread gets removed when cutting the pipe.
Push fittings as far as possible onto the pipe.
Place rack in between the walls and push fittings out as far as
possible again.
Mount with screws and plugs. Fasten pipe with key clamp.
  • Page 1 1
  • Page 2 2
  • Page 3 3

RackBuddy Logan Operating instructions

Brand
RackBuddy
Model
Logan
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents