2. frisco
  3. 555334
555334

frisco 555334 User manual

  • Hello! I'm an AI assistant and I have read the user manual for the frisco Pet Habitat 555334. This document provides detailed assembly instructions, and mentions key components like casters, screws, and seal tape. I'm ready to answer your questions about this product.
  • What is included in the package?
    What tools are needed for assembly?
    How many people are recommended for assembly?
Instruction Manual
FOR PET USE ONLY
Cozy Oasis Small Pet Habitat
Sku# 555334
Prior to assembling your new pet habitat, we recommend following these instructions step by step.
Make sure all parts are ready before you start assembly.
Identify and locate each of the components listed below.
*NOTE: Two adults recommended for assembly.
Parts Included
A x 1pc B x 1pc C x 1pc
Screws x 12pcs
*NOTE: Phillips Screwdriver needed for assembly.
Hand Screws x 4pcs Casters x 4pcs Wrench x 1pc Seal Tape Roll
Call 1.800.672.4399 for questions
Assembly snoitcurtsnI Please Read Through All Instructions Before Starting
2
Open Part (A) as shown below, while making sure the preinstalled wood pegs on the side panels are facing up.
Step 2
Call 1.800.672.4399 for questions
Assembly snoitcurtsnI Please Read Through All Instructions Before Starting
Take Part (B) and flip the top over to reveal the holes on the back panel.
Then, use the 4 Hand Screws to attach Part (B) to Part (A).
3
Step 1
A
B
B
A
A
4
Call 1.800.672.4399 for questions
Assembly snoitcurtsnI Please Read Through All Instructions Before Starting
With the help of another person, flip the cage on its back so the bottom opening is facing you.
Place Part (C) against the main frame and attach using the provided Screws.
Step 4
On Part (C), use the Wrench to attach the Casters (4 pcs) into the holes on the baseplate.
Step 3
NOTE:
Attach the two wheels with locks to the front
of the baseplate (next to the L-shaped brackets).
NOTE:
Phillips Screwdriver needed for this step.
C
C
5
Call 1.800.672.4399 for questions
Assembly snoitcurtsnI Please Read Through All Instructions Before Starting
Step 5
With the help of another person, flip the cage right side up.
Align the lid to the pegs to lock into place, then rotate the handle so it creates a flat surface.
Assembly Complete
OPTIONAL: Before closing the lid, apply
the seal tape around the inside for
better protection as shown below.
Questions
Questions? Call our friendly customer service anytime.
We’re here 24/7 at 1.800.672.4399
Warnings & Cautions
6
• For small pet use only. NOT FOR USE BY CHILDREN.
• Be sure to choose the correct sizing for your pet based on size and pet type.
• Inspect the product periodically and do not use if it becomes worn or damaged.
• Since many small pets can jump extremely high, always supervise your pet. Even if you think
your small pet is incapable of escaping, it is a good idea to place the habitat in a room in the
house that has been pet-proofed. Pet-proofing a home includes taking measures to ensure
your small pet cannot chew or ingest electrical cords, toxic plants, carpets, furniture, or that
he cannot squeeze into gaps behind furniture or appliances.
• Do not use as a barrier to stairs, heat sources, etc.
• Wipe clean with a damp soft cloth and mild soap. Dry thoroughly.
• Gradually transition your pet to accept the habitat.
/