frisco 304045 User manual

Brand: frisco

Model: 304045

Type: User manual

Frisco 304045 Wooden Rabbit Run provides temporary shelter for your rabbits in an outdoor environment. Treated with a water-based wood preservative solution for basic weather protection, this rabbit hutch requires annual re-treatment for optimal wood preservation. Choose a leveled, dry, and sheltered location for placement. Follow the included instructions for easy assembly using a Philips head screwdriver (not included).

OVERVIEW

COMPONENTS

GEAR UP

WARNINGS & CAUTIONS

Prior to assembly, be sure to identify and sort all components shown below.

216mm216mm

280mm

Questions? Call our customer service 1-800-672-4399

PLEASE READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS TO AVOID PET INJURY OR PROPERTY DAMAGES.

· Follow the instructions carefully and make sure you’ve completed each step.

· Keep away from heat sources and open flames.

· Do not sit on, climb on or shake the product!

· This wooden product is suitable for providing temporary shelter for your pets in an outdoor environment.

· This product has been treated with a harmless water-based wood preservative solution, which provides basic protection against the elements.

· This product should be re-treated at least once a year with a similar harmless solution to protect the wood.

· Choose a location that is leveled and dry, as well as being as sheltered from the weather as possible.

· This product is not for human use. Please, never allow children to play in or on the hutch. For pet use only.

· This product is not for cats/dogs. It is meant for rabbits.

· Please be aware that this product is not intended to be chewed on.

You'll need a Philips head screwdriver (not included) to complete the assembly.

Questions? Call our customer service 1-800-672-4399

ASSEMBLY INSTRUCTIONS

SKU# 304045

WOODEN RABBIT RUN

Tip: This item has predrilled holes to make set up easier for your rabbit's home.

1 2 3 4 5

6 7 8

11 12 13

9 10

3.5mm x 45mm Screw

3.0mm x 16mm Screw

3.0mm x 18mm Screw

4.2mm x 16mm Screw

Hinge

Bracket

20PCS

6PCS

18PCS

4PCS

1PC

4PCS

1PC

Back panel

1PC

Left panel 1

1PC

Left panel 2

1PC

Front panel of the house

1PC

Right panel of the house

1PC

Right panel 1

1PC

Roof

1PC

Top mesh panel 1

1PC

Top mesh panel 2

1PC

Right panel 2

1PC

Floor 1

1PC

Floor 2

1PC

Front panel

C×8

B×3 B×3

A×2

A×4

C×2

C×8

STEP 1 STEP 2 STEP 3

STEP 4

STEP 7 STEP 8

STEP 5 STEP 6

Connect Panel (1) and (2) using Screw

(A). Connect Panel (2) and (3) using

Bracket (F) and Screw (C).

Connect Panel (2) and (4) using screw

(A). Connect Panel (5) and (4) using

screw (A). Connect Panel (5) and (1)

using screw (A).

Connect Panel (10) and (3) using Screw (A).

Connect Panel (6) and (7) using Bracket

(F) and Screw (C). Then connect to

Panel (1) and (10) using Screw (A).

Fix the top mesh Panel (12) and then

(13) using Screw (A).

Connect Panel (12) and (13) using Screw (C).

FINISHED

ASSEMBLY

Insert floors (8) and (9) in the house. Assemble the roof. Connect the hinge

roof (11) to back Panel (1) using Screw

(B). The hinge should be closer to the

outside of the house. Connect Hinge (E)

to roof and Panel (5) using Screw (D).

frisco 304045 User manual

frisco 304045 User manual

Related papers

Other documents